State of execution

Monitoring of process execution. The contractor is informed continuously about the state of execution of the subprocess delegated to the subcontractor. In this way, the contractor may monitor execution and control whether set deadlines are met. 

Case transfer. The workflow is seen as a case which has to be transferred among different organizations. Transferring the case includes transfer of documents and transfer of the current state of execution. Only one organization at a time may execute the case. 

During the project duration, the project management is required to prepare a monthly order report for the company management illustrating the state of execution, the schedule situation as well as the current cost situation. Mostly such an order report contains a forecast in which the looming technical, commercial or schedule problems are to be identified. 

The ability criterion is satisfied for the moment the ability criterion is not satisfied for the moment s 5 and t. A principal conclusion resulting from the assumptions (6 -s- 8) and the graphical interpretation of the criterion (Fog 5) of the instantaneous system ability is that, for the system to be able to satisfy functions stated for executing, a value of the required potentiality should at least be equal to a value of the disposed potentiality. In the case of a system it will be the state of executing a service, e.g. viewing electronic mails, viewing WWWs, loading ftp files, and so on. 

In order to describe inherited stress state of weldment the finite element modelling results are used. A series of finite element calculations were conducted to model step-by-step residual stresses as well as its redistribution due to heat treatment and operation [3]. The solutions for the reference weldment geometries are collected in the data base. If necessary (some variants of repair) the modelling is executed for this specific case. 

Sound experimental execution including appropriate use of state-of-the-art equipment and calibration of that equipment... 

Can exports be easily made Availability of amenities for United States expatriate executives and... 

In addition, you must send a copy of the report to the State in which the facility is located ( State" refers to State of the U.S., the District of Columbia, the Commonwealth of Puerto Rico, Guam, American Samoa, the U.S. Virgin Islands, the Northern Mariana Islands, and any other territory or possession over which the U.S. has jurisdiction). Refer to Appendix Q for the appropriate State address for your submission. If your facility is located on Indian land, send a copy to the Chief Executive Officer of the applicable Indian tribe. Some tribes have entered into a cooperative agreement with the State, in which this case. Form R submissions should be sent to the entity designated In the cooperative agreement. 

If the nature of the problem is not readily apparent, then it might be necessary to go to the rule-based level. In this case a diagnostic rule will be applied to identify the state of the plant and an action rule used to select an appropriate response. Control will revert to the skill-based level to actually execute the required actions. More abstract functions such as situation evaluation and planning will only be required at the knowledge-based level if the problem cannot not be resolved at the rule-based level. 

Now if any irreversible changes occur in the system itself during the execution of the cycle, the principle of dissipation of energy shows that the available energy will be diminished in virtue of these, and since the available energy of the system must be the same after as it was before the execution of the cycle, because the state of the system is unaltered, it follows that some available energy must have been absorbed from outside in connection with the absorption of heat hence (A ) and therefore also... 

If the spring and weight had been immersed in oil or treacle, a viscous reaction would have been opposed to the motion, but since this is proportional to the velocity, it can be made as small as we please by executing the process very slowly and vanishes in the limit. Viscous reactions do not, therefore, prevent a system from existing in a state of true equilibrium provided all changes are made infinitely slowly they merely retard change, and the retardation vanishes in the limit. 

In addition to having to assign state variables to the strings of the DDF, we also have to assign properties to the alphabet symbols. In our flowshop example, the alphabet symbols can be interpreted as batches to be executed with a series of processing times. Thus, if we use the notation, (jc), to denote the state of partial solution, x, then... 

Granhohn, J.M. (2006) Promotion of Green Chemistry for Sustainable Economic Development and Protection of Public Health. Executive Directive 2006-6. State of Michigan. 

Executive Office of the President, Office of Science and Technology Policy, Climate Change State of... 

Execution a process triggered by planned or actual demand that changes the state of material. The process types Source, Make and Deliver are detailed with regard... 

In the following passage, the author gives an account of the development of the Emancipation Proclamation, Abraham Lincoln s 1863 executive order abolishing slavery in the Confederate States of America. 

In software, an object can be represented by a combination of stored state and executable code. 

For every attribute in the type specification, a function (read-only operation) is written that yields its value in any state of the implementation. This retrieval can be written in executable code for debugging or test purposes, but its execution performance is not important. The functions are private. They are useful for testing but not available to clients. interface Shape ... 

In Java, you d think spec types would be written as interfaces. Unfortunately, if we want to put the invariants and postconditions into the types themselves in real executable form, they must be classes. This has the uncomfortable effect of disallowing one implementation class from playing more than one role. An alternative is to put all the test apparatus in a separate set of classes that interrogates the states of the types. Again, we find ourselves applauding Eiffel, in which all this is natural and easy.)... 

Every postcondition is a predicate (a Boolean, true/false condition) stating what must be true if the designer has done the implementation properly. So the clauses are connected by and, and there is no sequence of execution implied. 

Internal quality control is undertaken by the inclusion of particular reference materials, called control materials , into the analytical sequence and by duplicate analysis. The control materials should, wherever possible, be representative of the test materials under consideration in respect of matrix composition, the state of physical preparation and the concentration range of the analyte. As the control materials are treated in exactly the same way as the test materials, they are regarded as surrogates that can be used to characterise the performance of the analytical system, both at a specific time and over longer intervals. Internal quality control is a final check of the correct execution of all of the procedures (including calibration) that are prescribed in the analytical protocol and all of the other quality assurance measures that underlie good analytical practice. IQC is therefore necessarily retrospective. It is also required to be as far as possible independent of the analytical protocol, especially the calibration, that it is designed to test. 

The decision for each example is expressed as an "action-next state" pair. The "action" is a reference to executable Radial code, which consists of a sequence of Radial statements. These statements may contain references to external programs in various languages (this will be discussed further later). The "next state" describes the context to which control is to pass after the action is completed. For diagnostic expert systems, such as TOGA, the next state will usually be the "goal" state of the module. This passes control back to the calling module. For procedural expert systems, such as robotics and instrumentation control applications, the control will be transferred between several states within a module to Implement looping. 

The heart of the system comprises the automatic units that carry out the basic operations. The individual steps of the operations are specified in a set of execution parameters, which are controlled and monitored by a microprocessor that also calculates the basic results. Apart from monitoring all operations for correct action, it is necessary to avoid the generation of incorrect analytical results and to signal the malfunctioning of any subsystem. The machine operation should allow the state of any procedure or module to be readily and easily visible. 

---