Stability anode

Oily emulsions containing surfactants and/or stabilizers Anodization rinse water... 

Anodes for SOFC are again based on Ni, usually Ni cermet materials are used that are more stable than plain Ni metal. NiO anodes are slightly soluble in YSZ electrolyte, but this stabilizes the cubic phase of the electrolyte. A NiO powder mixed with a YSZ powder together with a resin binder produces an anode functional layer onto which YSZ electrolyte can be deposited and sintered. The cathode can then be sprayed onto this layer and form an anode-supported planar SOFC structure [33]. YSZNi anodes can also be produced by vacuum plasma spraying. To fit the thermal expansion mismatch that can occur between the anode and the electrolyte, a zirconia-stabilized anode is preferable. The performance of plasma-sprayed electrodes is similar to that of the more common screen-printed anodes [37]. 

Guo C, Wang D, Wang Q, Wang B, Liu T (2012) A SiO/graphene nanocomposite as a high stability anode material for llthlum-ion batteries. Int J Electrochem Sci 7 8745... 

Thennodynamic stability is generally provided for noble metals in most media as tlieir oxidation potential is more anodic tlian tire reduction potential of species commonly occurring in tire surrounding phase. However, for many materials of technological and industrial importance tliis is not tire case. 

In dipping generally, but particularly with the anode process, it is desirable to use tanks that circulate the coagulant and latex compound, particularly the latter. Use of circulation keeps the Hquid surface clean and free from lumps, scum, or bubbles. Mechanical circulation can cause mbber particle instabihty, however, and eventually coagulate the compound. Therefore, tanks should be designed to minimize friction or shear action, and the compound stabilized to maintain mechanical stabiUty. 

Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA). These compounds bond direcdy with cuprous oxide (CU2O) at the metal surface, forming a "chemisorbed" film. The plane of the triazole Hes parallel to the metal surface, thus each molecule covers a relatively large surface area. The exact mechanism of inhibition is unknown. Various studies indicate anodic inhibition, cathodic inhibition, or a combination of the two. Other studies indicate the formation of an insulating layer between the water surface and the metal surface. A recent study supports the idea of an electronic stabilization mechanism. The protective cuprous oxide layer is prevented from oxidizing to the nonprotective cupric oxide. This is an anodic mechanism. However, the triazole film exhibits some cathodic properties as well. 

The most favorable conditions for equation 9 are temperature from 60—75°C and pH 5.8—7.0. The optimum pH depends on temperature. This reaction is quite slow and takes place in the bulk electrolyte rather than at or near the anode surface (44—46). Usually 2—5 g/L of sodium dichromate is added to the electrolysis solution. The dichromate forms a protective Cr202 film or diaphragm on the cathode surface, creating an adverse potential gradient that prevents the reduction of OCU to CU ion (44). Dichromate also serves as a buffering agent, which tends to stabilize the pH of the solution (45,46). Chromate also suppresses corrosion of steel cathodes and inhibits O2 evolution at the anode (47—51). 

Polymer cable anodes are made of a conducting, stabilized and modified plastic in which graphite is incorporated as the conducting material. A copper cable core serves as the means of current lead. The anode formed by the cable is flexible, mechanically resistant and chemically stable. The cable anodes have an external diameter of 12.7 mm. The cross-section of the internal copper cable is 11.4 mm and its resistance per unit length R is consequently 2 mQ m l The maximum current delivery per meter of cable is about 20 mA for a service life of 10 years. This corresponds to a current density of about 0.7 A m. Using petroleum coke as a backfill material allows a higher current density of up to a factor of four. 

Without coke backfill, the anode reactions proceed according to Eqs. (7-1) and (7-2) with the subsequent reactions (7-3) and (7-4) exclusively at the cable anode. As a result, the graphite is consumed in the course of time and the cable anode resistance becomes high at these points. The process is dependent on the local current density and therefore on the soil resistivity. The life of the cable anode is determined, not by its mechanical stability, but by its electrical effectiveness. 

The demands on insulating materials in soil and fresh water are relatively low. Anodically evolved oxygen makes the use of aging-resistant insulating materials necessary. These consist of special types of rubber (neoprene) and stabilized plastics of polyethylene, and polyvinylchloride, as well as cast resins such as acrylate, epoxy, polyester resin and many others. 

Cathodic protection cannot work with prestressed concrete structures that have electrically insulated, coated pipes. There is positive experience in the case of a direct connection without coated pipes this is protection of buried prestressed concrete pipelines by zinc anodes [38], Stability against H-induced stress corrosion in high-strength steels with impressed current has to be tested (see Section 2.3.4). 

Rider and Amott were able to produce notable improvements in bond durability in comparison with simple abrasion pre-treatments. In some cases, the pretreatment improved joint durability to the level observed with the phosphoric acid anodizing process. The development of aluminum platelet structure in the outer film region combined with the hydrolytic stability of adhesive bonds made to the epoxy silane appear to be critical in developing the bond durability observed. XPS was particularly useful in determining the composition of fracture surfaces after failure as a function of boiling-water treatment time. A key feature of the treatment is that the adherend surface prepared in the boiling water be treated by the silane solution directly afterwards. Given the adherend is still wet before immersion in silane solution, the potential for atmospheric contamination is avoided. Rider and Amott have previously shown that such exposure is detrimental to bond durability. 

Conceptually elegant, the SOFC nonetheless contains inherently expensive materials, such as an electrolyte made from zirconium dioxide stabilized with yttrium oxide, a strontium-doped lanthanum man-gaiiite cathode, and a nickel-doped stabilized zirconia anode. Moreover, no low-cost fabrication methods have yet been devised. 

The outstanding characteristics of the noble metals are their exceptional resistance to corrosive attack by a wide range of liquid and gaseous substances, and their stability at high temperatures under conditions where base metals would be rapidly oxidised. This resistance to chemical and oxidative attack arises principally from the Inherently high thermodynamic stability of the noble metals, but in aqueous media under oxidising or anodic conditions a very thin film of adsorbed oxygen or oxide may be formed which can contribute to their corrosion resistance. An exception to this rule, however, is the passivation of silver and silver alloys in hydrochloric or hydrobromic acids by the formation of relatively thick halide films. 

Before considering the principles of this method, it is useful to distinguish between anodic protection and cathodic protection (when the latter is produced by an external e.m.f.). Both these techniques, which may be used to reduce the corrosion of metals in contact with electrolytes, depend upon the electrochemical mechanisms that result from changing the potential of a metal. The appropriate potential-pH diagram for the Fe-H20 system (Section 1.4) indicates the magnitude and direction of the changes in the potential of iron immersed in water (pH about 7) necessary to make it either passive or immune in the former case the stability of the metal depends on the formation of a protective film of metal oxide (passivation), whereas in the latter the metal itself is thermodynamically stable and egress of metal ions from the lattice into the solution is thus prevented. 

---