Solids control devices

FIG. 17-16 Solids-flow-control devices, a) Slide valve, (h) Rotary valve, (c) Table feeder, (d) Screw feeder, (e) Cone valve, (f ) L Valve. 

Disposal The final func tional element in the sohd-waste-management system is disposal. Disposal is the ultimate fate of all solid wastes, whether they are wastes collected and transported direc tly to a landfQl site, semisolid wastes (sludge) from industrial treatment plants and air-pollution-control devices, incinerator residue, compost, or other substances from various solid-waste processing plants that are of no further use. 

Programmable Logic Controller (PLC) A microcomputer-based solid-state control system which receives inputs from user-supplied control devices such as switches and sensors, implements them in a precise pattern determined by instructions stored in the PLC memory, and provides outputs for control or user-supplied devices such as relays and motor starters. 

This field is very large and a detailed study of the subject is beyond the scope of this handbook. We will limit our discussions to the area of this subject that relates to the control of a.c. motors and attempt to identify the different solid-state devices that have been developed and their application in the control of a.c. motors. ()nly the more common circuits and configurations are discussed. The brief discussion of the subject provided here, however, should help the reader to understand this subject in general terms and to use this knowledge in the field of a.c. motor controls to achieve from a soft start to a very precise speed control and, more importantly, to conserve the energy of the machine which would be wasted otherwise. For more details of. statie controllers see the Further reading (Sr. nos. 2, 4., 5, 8 and 12) at the end of the chapter. To... 

One of the methods of controlling air pollution mentioned in the previous chapter was pollution removal. For pollution removal to be accomplished, the polluted carrier gas must pass through a control device or system, which collects or destroys the pollutant and releases the cleaned carrier gas to the atmosphere. The control device or system selected must be specific for the pollutant of concern. If the pollutant is an aerosol, the device used will, in most cases, be different from the one used for a gaseous pollutant. If the aerosol is a dry solid, a different device must be used than for liquid droplets. 

Residuals Produced Fluidized bed incineration produces no separate ash as such, but solids are carried over in the gas stream and will require removal. Residuals from the air pollution control devices may require additional treatment prior to disposal. 

The purpose of this work is to demonstrate that the techniques of quantum control, which were developed originally to study atoms and molecules, can be applied to the solid state. Previous work considered a simple example, the asymmetric double quantum well (ADQW). Results for this system showed that both the wave paeket dynamics and the THz emission can be controlled with simple, experimentally feasible laser pulses. This work extends the previous results to superlattices and chirped superlattices. These systems are considerably more complicated, because their dynamic phase space is much larger. They also have potential applications as solid-state devices, such as ultrafast switches or detectors. 

Gottlieb, I.M. Power Control with Solid State Devices. Prentice Hall, Reston, Virginia 1985... 

A comparison has been made between small scale test results and a field trial at a 17-ton scale for a solid compound [217]. The test results from a very sensitive calorimeter (Thermal Activity Monitor from ThermoMetric, Sweden) were substituted in a model, and the self-heating situation in bulk containers was predicted. The large-scale trial was carried out in a steel rectangular container lined with polyethylene. A control device was used to keep the container at a temperature of 40 to 45°C. Several thermocouples enabled monitoring of the temperature as a function of time in different places in the large container. 

Figure 5.8 Solid pellet discharge control device. The device is shown schematically in Fig. 5.6...

---