Sodium sulphur, secondary

It is well known that the 3- and 3"-aluminas are sodium ion conductors with promising applications as an electrolyte for the sodium-sulphur secondary battery. They have been widely studied because of their technological and scientific interest . ... 

Within each Part, chapters are included on all available types of primary batteries, secondary batteries and batteries available in primary and secondary versions. The primary batteries include carbon-zinc, carbon-zinc chloride, mercury-zinc and other mercury types, manganese dioxide-magnesium perchlorate, magnesium organic, lithium types (sulphur dioxide, thionyl chloride, vanadium pentoxide, iodine and numerous other lithium types), thermally activated and seawater batteries. Batteries available in primary and secondary Corms include alkaline manganese, silver-zinc, silver-cadmium, zinc-air and cadmium-air. The secondary batteries discussed include lead-acid, the nickel types (cadmium, iron, zinc, hydrogen), zinc-chlorine, sodium-sulphur and other fast ion types. 

Yuasa Battery Co. Ltd, 6-6 Josai-cho, Takatsukishi, Osaka-fii 569 also International Division, 12-112 Chome, Higashi-Shinbashi Minako-ku, Tokyo 105 Primary batteries, carbon-zinc Leclanchd, silver oxide-zinc secondary batteries, nickel-iron, nickel-cadmium, silver-zinc, silver-cadmium, sealed lead-acid. Sodium-sulphur, lithium-manganese dioxide. 

Secondary batteries, nickel-cadmium, sealed lead-acid, sodium-sulphur. 

By the hydrolysis of dialkyl cyanamides with dilute sulphuric acid this method gives pure secondary amines. The appropriate dialkyl cyanamide is prepared by treating sodium cyanamide (itself obtained in solution from... 

Dissolve 1 g. of the secondary amine in 3-5 ml. of dilute hydrochloric acid or of alcohol (in the latter case, add 1 ml. of concentrated hydrochloric acid). Cool to about 5° and add 4-5 ml. of 10 per cent, sodium nitrite solution, and allow to stand for 5 minutes. Add 10 ml. of water, transfer to a small separatory funnel and extract the oil with about 20 ml. of ether. Wash the ethereal extract successively with water, dilute sodium hydroxide solution and water. Remove the ether on a previously warmed water bath no flames should be present in the vicinity. Apply Liebermann s nitroso reaction to the residual oil or solid thus. Place 1 drop or 0 01-0 02 g. of the nitroso compovmd in a dry test-tube, add 0 05 g. of phenol and warm together for 20 seconds cool, and add 1 ml. of concentrated sulphuric acid. An intense green (or greenish-blue) colouration will be developed, which changes to pale red upon pouring into 30-50 ml. of cold water the colour becomes deep blue or green upon adding excess of sodium hydroxide solution. 

Wedzicha, B.L., Chemistry of Sulphur Dioxide in Foods, Elsevier, Amsterdam, 1984. Damant, A., Reynolds, S., and Macrae, R., The structural identification of a secondary dye produced from the reaction between sunset yellow and sodium metabisulphite, FoodAddit. Contam., 6, 273, 1989. 

---