Sodium phenolate, reaction with

Carbonates ate manufactured by essentially the same method as chloroformates except that more alcohol is required in addition to longer reaction times and higher temperatures. The products are neutralized, washed, and distilled. Corrosion-resistant equipment similar to that described for the manufacture of chloroformates is requited. Diaryl carbonates are prepared from phosgene and two equivalents of the sodium phenolates or with phenols and various... 

Obtained synthetically by one of the following processes fusion of sodium ben-zenesulphonate with NaOH to give sodium phenate hydrolysis of chlorobenzene by dilute NaOH at 400 C and 300atm. to give sodium phenate (Dow process) catalytic vapour-phase reaction of steam and chlorobenzene at 500°C (Raschig process) direct oxidation of cumene (isopropylbenzene) to the hydroperoxide, followed by acid cleavage lo propanone and phenol catalytic liquid-phase oxidation of toluene to benzoic acid and then phenol. Where the phenate is formed, phenol is liberated by acidification. 

The reaction between 3,5 dinitrobenzoyl chloride and compounds containing the OH, NHj, or NH groups is very rapid, and therefore is particularly suitable for identification purposes cf. pp. 335, 338, 381). It is usual to have sodium hydroxide present during the reaction with phenols and amino-acids, but this is not necessary with alcohols if they are dry. 

Sodium carbonate solution [cf. Section 5, p. 330). Note that phenols (except those containing acidic groups, e.., nitrophenols) give no reaction with sodium carbonate solution. 

To hydrolyse an ester of a phenol (e.g., phenyl acetate), proceed as above but cool the alkaline reaction mixture and treat it with carbon dioxide until saturated (sohd carbon dioxide may also be used). Whether a solid phenol separates or not, remove it by extraction with ether. Acidify the aqueous bicarbonate solution with dilute sulphuric acid and isolate the acid as detailed for the ester of an alcohol. An alternative method, which is not so time-consuming, may be employed. Cool the alkaline reaction mixture in ice water, and add dilute sulphuric acid with stirring until the solution is acidic to Congo red paper and the acid, if aromatic or otherwise insoluble in the medium, commences to separate as a faint but permanent precipitate. Now add 5 per cent, sodium carbonate solution with vigorous stirring until the solution is alkaline to litmus paper and the precipitate redissolves completely. Remove the phenol by extraction with ether. Acidify the residual aqueous solution and investigate the organic acid as above. 

The reaction with sodium sulfite or bisulfite (5,11) to yield sodium-P-sulfopropionamide [19298-89-6] (C3H7N04S-Na) is very useful since it can be used as a scavenger for acrylamide monomer. The reaction proceeds very rapidly even at room temperature, and the product has low toxicity. Reactions with phosphines and phosphine oxides have been studied (12), and the products are potentially useful because of thek fire retardant properties. Reactions with sulfide and dithiocarbamates proceed readily but have no appHcations (5). However, the reaction with mercaptide ions has been used for analytical purposes (13)). Water reacts with the amide group (5) to form hydrolysis products, and other hydroxy compounds, such as alcohols and phenols, react readily to form ether compounds. Primary aUphatic alcohols are the most reactive and the reactions are compHcated by partial hydrolysis of the amide groups by any water present. 

Early Synthesis. Reported by Kolbe in 1859, the synthetic route for preparing the acid was by treating phenol with carbon dioxide in the presence of metallic sodium (6). During this early period, the only practical route for large quantities of sahcyhc acid was the saponification of methyl sahcylate obtained from the leaves of wintergreen or the bark of sweet bitch. The first suitable commercial synthetic process was introduced by Kolbe 15 years later in 1874 and is the route most commonly used in the 1990s. In this process, dry sodium phenate reacts with carbon dioxide under pressure at elevated (180—200°C) temperature (7). There were limitations, however not only was the reaction reversible, but the best possible yield of sahcyhc acid was 50%. An improvement by Schmitt was the control of temperature, and the separation of the reaction into two parts. At lower (120—140°C) temperatures and under pressures of 500—700 kPa (5—7 atm), the absorption of carbon dioxide forms the intermediate phenyl carbonate almost quantitatively (8,9). The sodium phenyl carbonate rearranges predominately to the ortho-isomer. sodium sahcylate (eq. 8). 

Available Chlorine Test. The chlorine germicidal equivalent concentration test is a practical-type test. It is called a capacity test. Under practical conditions of use, a container of disinfectant might receive many soiled, contaminated instniments or other items to be disinfected. Eventually, the capacity of the disinfectant to serve its function would be overloaded due to reaction with the accumulated organic matter and organisms. The chlorine germicidal equivalent concentration test compares the load of a culture of bacteria that a concentration of a disinfectant will absorb and still kill bacteria, as compared to standard concentrations of sodium hypochlorite tested similarly. In the test, 10 successive additions of the test culture are added to each of 3 concentrations of the hypochlorite. One min after each addition a sample is transferred to the subculture medium and the next addition is made 1.5 min after the previous one. The disinfectant is then evaluated in a manner similar to the phenol coefficient test. For equivalence, the disinfectant must yield the same number of negative tubes as one of the chlorine standards. 

The quaternary fraction of pot curare, after the removal of some neoprotocuridine, was separated into a portion salted out by sodium bicarbonate, and a portion not so precipitated. The latter was fractionated on a plan described in the original, the most active product obtained being an amorphous iodide with a paralysing dose of 1- 5 mg. per kilo frog. This iodide was phenolic, gave the Millon reaction, but no strychnine-like reaction with bichromate and sulphuric acid. No crystalline product could be isolated, but on complete methylation certain of the fractions yielded crystalline methiodides as follows —... 

Mono-substitution occurs most readily in the stepwise replacement of the halogen substituents of 2,4,6-trichloro-s-triazine with aqueous methanol and sodium bicarbonate (30°, 30 min), the monomethoxy derivative (324) is obtained on heating (65°, 30 min), the disubstitu-ted derivative is formed and on brief heating (65°) with the more basic sodium carbonate or methanolic sodium hydroxide (25°, 3 hr) complete methoxylation (320) occurs. Ethanolic ethoxide (25°, 1 hr) or sodium carbonate (35°) is sufficient to give complete ethoxy-dechlorination. The corresponding phenoxy derivatives are obtained on treatment with one (0°), two (15°, 1 hr), or three equivalents (25-70°, 3 hr) of various sodium phenoxides in aqueous acetone. The stepwise reaction with phenols, alcohols, or thiols proceeds in better yield in organic solvents (acetone or chloroform) with collidine or 2,6-lutidine as acid acceptors than in aqueous sodium bicarbonate. ... 

The hydrolysis reaction with sodium or potassium hydroxide affords the corresponding phenols (refs. 65 - 68). 

Imidazolides of aromatic sulfonic acids react much more slowly in alcoholysis reactions than the carboxylic acid imidazolides. Although the reaction with phenols is quantitative when a melt is heated to 100 °C for several hours, with alcohols under these conditions only very slight alcoholysis is observed. In the presence of 0.05 equivalents (catalytic amount) of sodium ethoxide, imidazole sodium, of NaNH2, however, imidazolides of sulfonic acids react with alcohols almost quantitatively and exothermically at room temperature in a very short time to form sulfonic acid esters (sulfonates). (If the ratio of sulfonic acid imidazolide to alcoholate is 1 2, ethers are formed see Chapter 17). The mechanism of catalysis by base corresponds to that operative in the synthesis of carboxylic esters by the imidazolide method. Because of the more pronounced nucleophilic character of alkoxide ions, sulfonates can also be prepared in good yield by alcoholysis of their imidazolides in the presence of hydroxide ions i.e., with alcoholic sodium hydroxide. 45 Examples of syntheses of sulfonates are presented below. 

---