Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Sodium 4,6-lactone

The penta substituted cyclopentane was synthesized by a six step stereoselective sequence starting with eyelopentadieny1 sodium. Lactone 16 was transformed in five steps to Q ,p-unsaturated ketone 17. This was converted in five more steps to PGF2Q . A sequence was deveioped whereby C-ll and C-15 alcohols can be protected as THP ethers, and the C-9 ketone generated by oxidation leading to PGE2. [Pg.173]

The furo- and pyranobenzopyranones 114 and 115 are prepared by the reaction of 0-enolate of i(-keto lactone 113[132], The isoxazolc 117 is obtained by the oxidation of the oxime 116 of a, /3- or, d, 7-unsaturated ketones with PdCh and Na2C03 in dichloromethane[l 33], but the pyridine 118 is formed with PdCl2(Ph3P)2 and sodium phenoxide[134]. [Pg.36]

The intramolecular reaction oF allcenes with various O and N functional groups offers useful synthetic methods for heterocycles[13,14,166]. The reaction of unsaturated carboxylic acids affords lactones by either exo- or endo-cyclization depending on the positions of the double bond. The reaction of sodium salts of the 3-alkenoic acid 143 and 4-alkenoic acid 144 with Li2PdCl4 affords mostly five-membcrcd lactones in 30-40% yields[167]. Both 5-hexe-noic acid (145) and 4-hexenoic acid (146) are converted to five- or six-mem-bered lactones depending on the solvents and bases[168]. Conjugated 2,4-pentadienoic acid (147) is cyclized with Li2PdCl4 to give 2-pyrone (148) in water[i69]. [Pg.41]

The carbonylation of COD PdCl2 complex in aqueous sodium acetate produces /rui7x-2-hydroxy-5-cyclooctenecarboxylic acid /i-lactone (240). The lactone is obtained in 79% yield directly by the carbonylation of the COD complex in aqueous sodium acetate solution[220]. /i-Propiolactone (241) is obtained in 72% yield by the reaction of the PdCC complex of ethylene with CO and water in MeCN at —20 " C. /3-Propiolactone synthesis can be carried out with a catalytic amount of PdCC and a stoichiometric amount of CuCl2[221]. [Pg.53]

Sodium / -toluenesulfoiiainide (319) reacts with the allylic lactone 318 to give an allylic tosylamide with retention of configuration[196]. [Pg.333]

Triethylammonium formate is another reducing agent for q, /3-unsaturated carbonyl compounds. Pd on carbon is better catalyst than Pd-phosphine complex, and citral (49) is reduced to citronellal (50) smoothly[55]. However, the trisubstituted butenolide 60 is reduced to the saturated lactone with potassium formate using Pd(OAc)2. Triethylammonium formate is not effective. Enones are also reduced with potassium formate[56]. Sodium hypophosphite (61) is used for the reduction of double bonds catalyzed by Pd on charcoal[57]. [Pg.520]

Xyhtol also is obtained by sodium borohydride reduction of D-xylonic acid y-lactone (32) and from glucose by a series of transformations through diacetone glucose (46). [Pg.48]

Industrial Synthetic Improvements. One significant modification of the Stembach process is the result of work by Sumitomo chemists in 1975, in which the optical resolution—reduction sequence is replaced with a more efficient asymmetric conversion of the meso-cyc. 02Lcid (13) to the optically pure i7-lactone (17) (Fig. 3) (25). The cycloacid is reacted with the optically active dihydroxyamine [2964-48-9] (23) to quantitatively yield the chiral imide [85317-83-5] (24). Diastereoselective reduction of the pro-R-carbonyl using sodium borohydride affords the optically pure hydroxyamide [85317-84-6] (25) after recrystaUization. Acid hydrolysis of the amide then yields the desired i7-lactone (17). A similar approach uses chiral alcohols to form diastereomic half-esters stereoselectivity. These are reduced and direedy converted to i7-lactone (26). In both approaches, the desired diastereomeric half-amide or half-ester is formed in excess, thus avoiding the cosdy resolution step required in the Stembach synthesis. [Pg.30]

Individual polyethers exhibit varying specificities for cations. Some polyethers have found appHcation as components in ion-selective electrodes for use in clinical medicine or in laboratory studies involving transport studies or measurement of transmembrane electrical potential (4). The methyl ester of monensin [28636-21 -7] i2ls been incorporated into a membrane sHde assembly used for the assay of semm sodium (see Biosensors) (5). Studies directed toward the design of a lithium selective electrode resulted in the synthesis of a derivative of monensin lactone that is highly specific for lithium (6). [Pg.166]

Strong bases such as methan olic potassium hydroxide, sodium methoxide, or 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU), cause epimerization at the C-2 carbon or shift the beta-gamma double bond into conjugation with the lactone carbonyl (Fig. 4) (25,26). [Pg.281]

Newkome and co-workers have demonstrated the operation of a template effect in the formation of a pyrido-ester-crown. In the reaction shown in Eq. (2.8), they treated 2-clTloronicotinoyl cliloride with either the disodium or dipotassium salt of pentaethylene glycol. TJie two reactions were conducted under identical conditions except for the presence of sodium vs. potassium cations. Since the product is a six-oxygen macrocycle, its formation would be expected to be favored by K" rather than Na" counter ions for the glycolate. In fact, the yields of crown-lactone were 30% and 48% respectively when Na" and K" were the templating cations. [Pg.17]

When 2-chloronicotinoyl chloride is allowed to react with pentaethylene glycol and sodium hydride in benzene solution, acylation followed by nucleophilic aromatic substitution occurs resulting in the formation of a macrocyclic lactone (48% yield) as shown in Eq. (2.8), in Chap. 2. [Pg.46]

In opocinchenine the hydroxyl group must, therefore, be in the ortho-position relative to the point of attachment of the benzene ring to the quinoline nucleus. The relative positions of the two ethyl groups are determined by the fact that apocincheninic acid ethyl ether on oxidation with lead peroxide and sulphuric acid gives the lactone of hydroxyopo-cincheninic acid ethyl ether (I), which, on oxidation by sodium hypo-bromite, yields quinolylphenetoledicarboxylic acid (II). [Pg.441]

When monocrotaline is hydrogenolysed the acid scission product is monocrotalic acid, CgHigOj, m.p. 181-2°, [a]p ° — 5-33° (HgO), which provides a methyl ester, m.p. 79-80°, [ ]d°° — 16-2° (EtOH), containing one active H atom and a p-bromophenacyl ester, m.p. 162-3°. It is a lactonic acid, which on boiling with sodium hydroxide solution loses carbon dioxide and produces a/3-dimethyllaevulic acid (monocrotic acid, II). [Pg.612]

Pilocarpine dissolves in dilute soda solution, and the rotation is thereby reduced, due to the formation of the sodium salt of pilocarpic acid, CiiHigOgNa, of which pilocarpine is the lactone. Amorphous barium and copper salts have been prepared. Pilocarpine in dilute sulphuric acid gives with hydrogen peroxide, followed by potassium dichromate, a bluish-violet colour soluble in benzene. For the identification of the alkaloid Wagenaar recommends precipitation with gold chloride solution. [Pg.622]

A mixture of 10 g of the glyoxylic acid, 100 ml of acetic anhydride, and 0.5 g of 2,4-dinitrobenzenesulfonic acid is stirred at 25° for 2 hr. Sodium acetate (0.5 g) is added and the mixture concentrated in vacuum at 50°. The residue is taken up in 100 ml of benzene and washed with two portions of 2.5 N sodium hydroxide to remove the remaining acetic anhydride. The benzene solution is washed with water, dried and concentrated in vacuum to dryness. Crystallization from 40 ml of absolute ethanol gives 9.8 g (85%) of 3a,20,23-trihydroxy-16a-methyl-11 -oxo-21 -norchola-17(20),22-dienoic acid-24(20)-lactone 3,23-diacetate mp 165-175°. [Pg.191]

The enol lactone (12.7 g) is added to 157 ml of 0.5 M perbenzoic acid in benzene and allowed to stand at 25° for 140 hr. The solution is cooled to 15° and 15% sodium bisulfite solution is added to neutralize the excess peracid. The organic layer is separated and washed with saturated sodium bicarbonate solution and water. The benzene solution is dried over anhydrous sodium sulfate, filtered and concentrated to 30 ml. The product is crystallized by adding 80 ml of petroleum ether, filtered and washed with petroleum ether to yield 12.8 g (98%) of 3a,20,23-trihydroxy-16a-methyl-17(20)-oxido-ll-oxo-21-norchol-22-enoic acid-24(20)-lactone 3,23-diacetate mp 225-227°. [Pg.191]

To a suspension of 12 g of the lactone in 80 ml of ethanol is added 51 ml of 1 JV sodium hydroxide over 30 min with maintenance of the reaction temperature at 10-20°. The solution is stirred at 22-25° for 18 hr during which time the product separates. After filtration and washing with two 25 ml portions of water, the wet cake is extracted into 150 ml of ethyl acetate. The organic... [Pg.191]

The residue (12 g) which contains the 18-iodo-18,20-ether is dissolved in 200 ml of acetone, 5 g of silver chromate is added Note 3) and after cooling to 0°, 11.8 ml of a solution of 13.3 g of chromium trioxide and 11.5 ml of concentrated sulfuric acid, diluted to 50 ml with water is added during a period of 5 min. After an additional 60 min, a solution of 112 g of sodium acetate in 200 ml of water is added and the mixture diluted with benzene (400 ml), filtered and the benzene layer separated. The aqueous phase is reextracted with benzene, washed with half-saturated sodium chloride solution, dried and evaporated to yield 11.2 g of a crystalline residue. Recrystallization from ether gives 7.2 g (72%) of pure 3/5, 1 la, 20/5-trihydroxy-5a-pregnan-18-oic acid 18,20 lactone 3,11-diacetate mp 216-218°. [Pg.252]

P-Acetoxy-5-hydroxy-B-mrcholestan-6-carboxylic Acid 5,6-Lactone (TO)."" A solution of 5 g (0.011 mole) of keto acid (69), 4.4 g of benzoyl chloride and 10 ml of anhydrous pyridine is allowed to stand for 3 days at room temperature. After a short period the mixture turns red-brown and at the end of the reaction the dark semi-solid mass is poured into 200 ml of water and extracted with two 100 ml portions of ether. The ethereal extracts are washed twice with equal portions of 5 % sodium hydroxide and water, dried and the ether evaporated. The red sirupy residue is mixed with 10 ml of methanol and a brown solid separates immediately. After standing for 1 hr the solid is removed by filtration and washed with methanol. A second crop is obtained upon concentration of the filtrate. The combined crops are recrystallized twice from methanol to give (70) as white needles mp 124-125° yield 2.8 g (58 %). [Pg.431]


See other pages where Sodium 4,6-lactone is mentioned: [Pg.54]    [Pg.114]    [Pg.322]    [Pg.367]    [Pg.241]    [Pg.213]    [Pg.306]    [Pg.32]    [Pg.178]    [Pg.383]    [Pg.494]    [Pg.164]    [Pg.48]    [Pg.49]    [Pg.49]    [Pg.49]    [Pg.49]    [Pg.14]    [Pg.18]    [Pg.29]    [Pg.62]    [Pg.274]    [Pg.113]    [Pg.286]    [Pg.677]    [Pg.742]    [Pg.3]    [Pg.4]    [Pg.22]    [Pg.251]    [Pg.435]   
See also in sourсe #XX -- [ Pg.136 ]




SEARCH



Lactones reduction with sodium borohydride

Lactones, allylic reaction with sodium malonate

Sodium bis aluminum hydride lactones

Sodium borohydride lactones

© 2024 chempedia.info