Silicon complexes with nickel

It is postulated that the mechanism of the silane-mediated reaction involves silane oxidative addition to nickel(O) followed by diene hydrometallation to afford the nickel -jr-allyl complex A-16. Insertion of the appendant aldehyde provides the nickel alkoxide B-12, which upon oxygen-silicon reductive elimination affords the silyl protected product 71c along with nickel(O). Silane oxidative addition to nickel(O) closes the catalytic cycle. In contrast, the Bu 2Al(acac)-mediated reaction is believed to involve a pathway initiated by oxidative coupling of the diene and... 

Numerous complexes of nickel(II) and nickel(O) catalyze the addition of the Si-H bond to olefins. Among such catalysts are nickel-phosphine complexes, e.g., Ni(PR3)2X2 (where X=C1, I, NO3 R=alkyl and aryl), Ni(PPh3)4, and Ni-(CO)2(PPh3)2, as well as bidentate complexes of NiCl2-(chelate) and Ni(acac)2L (I phosphine), and Ni(cod)2(Pr3)2 [1-5]. A characteristic feature of nickel-phosphine-catalyzed olefin hydrosilylation is side reactions such as H/Cl, redistribution at silicon and the formation of substantial amounts of internal adducts in addition to terminal ones [69]. Phosphine complexes of nickel(O) and nickel(II) are used as catalysts in the hydrosilylation of olefins with functional groups, e.g., vinyl acetate, acrylonitrile [1-4], alkynes [70], and butadiynes [71]. 

Cartoni et al. [88] studied perspective of the use as stationary phases of n-nonyl- -diketonates of metals such as beryllium (m.p. 53°C), aluminium (m.p. 40°C), nickel (m.p. 48°C) and zinc (liquid at room temperature). These stationary phases show selective retention of alcohols. The retention increases from tertiary to primary alcohols. Alcohols are retained strongly on the beryllium and zinc chelates, but the greatest retention occurs on the nickel chelate. The high retention is due to the fact that the alcohols produce complexes with jS-diketonates of the above metals. Similar results were obtained with the use of di-2-ethylhexyl phosphates with zirconium, cobalt and thorium as stationary phases [89]. 6i et al. [153] used optically active copper(II) complexes as stationary phases for the separation of a-hydroxycarboxylic acid ester enantiomers. Schurig and Weber [158] used manganese(ll)—bis (3-heptafiuorobutyryl-li -camphorate) as a selective stationary phase for the resolution of racemic cycUc ethers by complexation GC. Picker and Sievers [157] proposed lanthanide metal chelates as selective complexing sorbents for GC. Suspensions of complexes in the liquid phase can also be used as stationary phases. Pecsok and Vary [90], for example, showed that suspensions of metal phthalocyanines (e.g., of iron) in a silicone fluid are able to react with volatile ligands. They were used for the separation of hexane-cyclohexane-pentanone and pentane-water-methanol mixtures. 

Not only complexes but also metal salts that complex with the compounds to be separated can be used as selective complexing stationary phases. For example, Phillips [91] described the use of zinc and copper stearates and nickel oleate for the selective separation of amines. The retentions of aliphatic amines decrease in the order primary > secondary > tertiary. The separation of 7-picoline and 2,6-lutidine on a zinc stearate column is possible if the column efficiency is only 4 theoretical plates and the column is 1 cm long. To effect this separation on a non-selective silicone stationary phase a column with an efficiency of 250,000 theoretical plates is required. Some amines (e.g., ethanolamine... 

Fig. 11 View of the hexanuclear Cu(II) polysiloxanolate complex (left) and the corresponding Ni(II) complex with a chloride anion in the middle of the channel (right). The carbon, copper, nickel, oxygen, chlorine, silicon, and hydrogen atoms are represented by spheres of different shades of gray, from dark to bright, respectively...

In Kharasch addition to acrylic acid ester that is catalyzed by nickel complexes with silicon-containing dendrimers modified with a chelate aryldiamide ligand, the catalyst activity is lower than that of a low molecular weight analogue, van Koten and coworkers assumed that this is due to the small distance between nickel atoms on the dendrimer surface and to the formation of mixed-valence binuclear complexes [114, 126, 127]. 

A proposed mechanism [9] for the hydrosilylation of olefins catalyzed by platinum(II) complexes (chloroplatinic acid is thought to be reduced to a plati-num(II) species in the early stages of the catalytic reaction) is similar to that for the rhodium(I) complex-catalyzed hydrogenation of olefins, which was advanced mostly by Wilkinson and his co-workers [10]. Besides the Speier s catalyst, it has been shown that tertiary phosphine complexes of nickel [11], palladium [12], platinum [13], and rhodium [14] are also effective as catalysts, and homogeneous catalysis by these Group VIII transition metal complexes is our present concern. In addition, as we will see later, hydrosilanes with chlorine, alkyl or aryl substituents on silicon show their characteristic reactivities in the metal complex-catalyzed hydrosilylation. Therefore, it seems appropriate to summarize here briefly recent advances in elucidation of the catalysis by metal complexes, including activation of silicon-hydrogen bonds. 

The anionic nature of pectin is yet another important aspect, which prevents the pol5mierization of organic silicon compounds. Thus pectin always makes crosslinked complexes with proteins under suitable conditions and act as a powerful chelator of allergens such as cobalt, nickel, copper (Table 8.1). 

Assay of beryllium metal and beryllium compounds is usually accomplished by titration. The sample is dissolved in sulfuric acid. Solution pH is adjusted to 8.5 using sodium hydroxide. The beryllium hydroxide precipitate is redissolved by addition of excess sodium fluoride. Liberated hydroxide is titrated with sulfuric acid. The beryllium content of the sample is calculated from the titration volume. Standards containing known beryllium concentrations must be analyzed along with the samples, as complexation of beryllium by fluoride is not quantitative. Titration rate and hold times are critical therefore use of an automatic titrator is recommended. Other fluoride-complexing elements such as aluminum, silicon, zirconium, hafnium, uranium, thorium, and rare earth elements must be absent, or must be corrected for if present in small amounts. Copper—beryllium and nickel—beryllium alloys can be analyzed by titration if the beryllium is first separated from copper, nickel, and cobalt by ammonium hydroxide precipitation (15,16). 

A series of complex silico-arsenides has been obtained 6 by melting metals with silicon and an excess of arsenic under a layer of molten cryolite and sodium chloride. The following have thus been prepared copper silico-arsenide, a grey crystalline brittle mass zinc silico-arsenide, which behaved as above with hydrochloric acid iron, cobalt and nickel siMco-arsenides, of composition M2SisAs4, similar in appearance to the copper compound. When platinum was treated in the same way, a hard white product of indefinite composition was obtained, almost insoluble in nitric acid. 

Up to the end of 1972, more than 350 compounds containing silicon-transition-metal bonds had been synthesized, but their distribution among the d-block elements is by no means uniform. It can be inferred that the stability of such complexes decreases from right to left in a transition series and with increasing oxidation state of the transition metal. Nevertheless, it is remarkable that no silyl derivatives of the vanadium group have been prepared and that there are few nickel or palladium derivatives, as can be seen in the complete list of compounds given in Section 6. 

---