Silane From alkene

A number of silyl enol ethers of acyl silanes have been produced from alkenes by subjection to 50 atmospheres of carbon monoxide in the presence of 0.1 equivalents of trialkylsilane and 2 mol% of an iridium catalyst (Scheme 26)102. Hydrolysis to the acyl silanes was achieved using hydrochloric acid-acetone. 

Some authors have described the generation of boronates and stannanes bound to a support starting from the corresponding aryl haHdes [372, 6]. Boranes, boronic esters, and stannanes can furthermore be readily obtained from vinyl halides or from alkenes or alkynes by means of hydroboration or hydrostannylation (see Section 4.2). Boronates and silanes or stannanes can act as carbanion equivalents. Thus, support-bound boronates can release aryl alkenyl groups upon transmetala-tion to Rh. The intermediately formed Rh species can act as nucleophiles, and react with aldehydes to give alcohols (618) or can perform Michael additions (621, 622) [437, 438, 439] (Scheme 129) (see also Sections 4.7.15 and 4.2). 

Asymmetric hydrosilylation has thus become one of the most useful methods for the preparation of optically active alcohols from alkenes [9,10]. Another important application of catalytic asymmetric hydrosilylation is the 1,4-hydros-ilylation of 1,3-dienes which efficiently produces optically active allyHc silanes. 

Secondary alkyl silanes are also formed in the hydrosilylation of phenylethylene. In facfi the latter reaction has been studied in some detail, and primary alkyl silanes, hydrogenation product (i.e. ethylbenzene), andf -2-silylphenylethylenes are also formed (eq 13). Equimolar amounts of ethylbenzene (2) and -2-silyl-phenylethylene (4) are produced, implying these products arise from the same reaction pathway. It has been suggested that this involves dimeric rhodium species because the relative amounts of these products increase with the rhodium silane ratio however, competing radical pathways cannot be ruled out. Certainly, product distributions are governed by the proportions of aU the components in the reaction (i.e. catalyst, silane, and alkene), and the reaction temperature. Side products in the hydrosilylation of 1-octene include vinylsilanes and allylsilanes (eq 14). - ... 

Several observations led to the proposal that some of the catalysts containing metals other than platinum do not react by the Chalk-Harrod mechanism. First, carbon-silicon bond-forming reductive elimination occurs with a sufficiently small number of complexes to suggest that formation of the C-Si bond by insertion of olefin into the metal-silicon bond could be faster than formation of the C-Si by reductive elimination. Second, the formation of vinylsilane as side products - or as the major products in some reactions of silanes with alkenes cannot be explained by the Chalk-Harrod mechanism. Instead, insertion of olefin into the M-Si bond, followed by p-hydrogen elimination from the resulting p-silylalkyl complex, would lead to vinylsilane products. This sequence is shown in Equation 16.39. Third, computational studies have indicated that the barrier for insertion of ethylene into the Rh-Si bond of the intermediate generated from a model of Wilkinson s catalyst is much lower than the barrier for reductive elimination to form a C-Si bond from the alkylrhodium-silyl complex. ... 

Asymmetric hydrosilylation of alkenes, catalysed by ferrocenylphosphine-palladium complexes, can be utilized in a synthesis of optically active alcohols from alkenes (Scheme 1). The initial optically active silane adducts are converted to alkyl pentafluorosilicates (1) which are then cleaved oxidatively, with retention of configuration, using peracid (c/. 3,132). Complex (2) was the best of several hydrosilylation catalysts examined using this, alcohols with enantiomeric purities of approx. 50% were obtained from norbornene and styrene as the alkenes. 

Miscellaneous Reactions. DTBP has been used as a hydrosi-lylation catalyst, even though catalysis by transition metal complexes have largely replaced the radical methods. DTBP has also been used as an oxidant for silanes. Other applications of DTBP include its use as an initiator for radical mediated deoxygenation of alcohols via the corresponding chloroformate or acetate ester (eq 20). It has also been used as an initiator for the reduction of lactones and esters to ethers using trichlorosilane. In a rare example of a nonradical reaction, DTBP has been used in conjunction with titanium(IV) chloride for the formation of chlorohydrin from alkenes (eq 21). ... 

Recently, Szabo and co-workers synthesized allyl silanes either from alkenes by C-H silylation or from allylic alcohols. ... 

In 1971, a short communication was published [54] by Kumada and co-workers reporting the formation of di- and polysilanes from dihydrosilanes by the action of a platinum complex. Also the Wilkinson catalyst (Ph3P)3RhCl promotes hydrosilation. If no alkenes are present, formation of chain silanes occurs. A thorough analysis of the product distribution shows a high preference for polymers (without a catalyst, disproportionation reactions of the silanes prevail). Cross experiments indicate the formation of a silylene complex as intermediate and in solution, free silylenes could also be trapped by Et3SiH [55, 56],... 

When double bonds are reduced by lithium in ammonia or amines, the mechanism is similar to that of the Birch reduction (15-14). ° The reduction with trifluoro-acetic acid and EtsSiH has an ionic mechanism, with H coming in from the acid and H from the silane. In accord with this mechanism, the reaction can be applied only to those alkenes that when protonated can form a tertiary carbocation or one stabilized in some other way (e.g., by a OR substitution). It has been shown, by the detection of CIDNP, that reduction of a-methylstyrene by hydridopenta-carbonylmanganese(I) HMn(CO)5 involves free-radical addition. ... 

The hydrosi(ly)lations of alkenes and alkynes are very important catalytic processes for the synthesis of alkyl- and alkenyl-silanes, respectively, which can be further transformed into aldehydes, ketones or alcohols by estabhshed stoichiometric organic transformations, or used as nucleophiles in cross-coupling reactions. Hydrosilylation is also used for the derivatisation of Si containing polymers. The drawbacks of the most widespread hydrosilylation catalysts [the Speier s system, H PtCl/PrOH, and Karstedt s complex [Pt2(divinyl-disiloxane)3] include the formation of side-products, in addition to the desired anh-Markovnikov Si-H addition product. In the hydrosilylation of alkynes, formation of di-silanes (by competing further reaction of the product alkenyl-silane) and of geometrical isomers (a-isomer from the Markovnikov addition and Z-p and -P from the anh-Markovnikov addition. Scheme 2.6) are also possible. 

Most reactions of alkenyl and allylic silanes require strong carbon electrophiles and Lewis acid catalysts are often involved. The most useful electrophiles from a synthetic standpoint are carbonyl compounds, iminium ions, and electrophilic alkenes. 

As the intermediate formed in a polyene cyclization is a carbocation, the isolated product is often found to be a mixture of closely related compounds resulting from competing modes of reaction. The products result from capture of the carbocation by solvent or other nucleophile or by deprotonation to form an alkene. Polyene cyclizations can be carried out on reactants that have structural features that facilitate transformation of the carbocation to a stable product. Allylic silanes, for example, are stabilized by desilylation.12... 

Entry 5 is an example of the use of fra-(trimethylsilyl)silane as the chain carrier. Entries 6 to 11 show additions of radicals from organomercury reagents to substituted alkenes. In general, the stereochemistry of these reactions is determined by reactant conformation and steric approach control. In Entry 9, for example, addition is from the exo face of the norbornyl ring. Entry 12 is an example of addition of an acyl radical from a selenide. These reactions are subject to competition from decarbonylation, but the relatively slow decarbonylation of aroyl radicals (see Part A, Table 11.3) favors addition in this case. 

Hydrosilylation turned out to be a unique method in organosilicone chemistry, but in some cases it suffers from severe side reactions. An explanation is provided by the generally accepted reaction mechanism known as "Chalk-Harrod mechanism" described elsewhere [7]. Included in this series of reaction steps is an insertion of olefmic ligands into a platinum-hydrogen bond. Since the metal may be bonded to either of the unsaturated carbon atoms and the reaction is also an equilibrium, alkenes may result which are in fact isomerized starting material. Isomeric silanes are to be expected as well (Eq. 1), along with 1-hexylsilane, which is by far, the main compound produced. 

Alkenes with two reactive carbon-carbon double bonds per molecule like 1,5-hexadiene or diallyl ether are used in the synthesis of silicone compounds which can be later crosslinked by hydrosilylation. A sufficiently high excess of double bonds helps to prevent the dienes from taking part in silane addition across both olefmic ends, but trouble comes from double bond isomerization (Eq. 2). 

A one-pot reaction between a tryptophan ester, benzotriazole, and 2,5-dimethoxytetrahydrofuran in acetic acid gives the diastereomeric benzotriazolyl tetracycles, 349, in good yield. Substitution of the benzotriazole by reaction with silyl enol ethers and boron trifluoride etherate gives the corresponding ketones 350 and 351, and reaction with allylsilanes gives the corresponding alkenes 352 and 353. If the boron trifluoride etherate is added to the mixture before the silane, elimination of benzotriazole from 349 is also observed (Scheme 83) <1999T3489>. 

However, most asymmetric 1,3-dipolar cycloaddition reactions of nitrile oxides with alkenes are carried out without Lewis acids as catalysts using either chiral alkenes or chiral auxiliary compounds (with achiral alkenes). Diverse chiral alkenes are in use, such as camphor-derived chiral N-acryloylhydrazide (195), C2-symmetric l,3-diacryloyl-2,2-dimethyl-4,5-diphenylimidazolidine, chiral 3-acryloyl-2,2-dimethyl-4-phenyloxazolidine (196, 197), sugar-based ethenyl ethers (198), acrylic esters (199, 200), C-bonded vinyl-substituted sugar (201), chirally modified vinylboronic ester derived from D-( + )-mannitol (202), (l/ )-menthyl vinyl ether (203), chiral derivatives of vinylacetic acid (204), ( )-l-ethoxy-3-fluoroalkyl-3-hydroxy-4-(4-methylphenylsulfinyl)but-1 -enes (205), enantiopure Y-oxygenated-a,P-unsaturated phenyl sulfones (206), chiral (a-oxyallyl)silanes (207), and (S )-but-3-ene-1,2-diol derivatives (208). As a chiral auxiliary, diisopropyl (i ,i )-tartrate (209, 210) has been very popular. 

Macrocycles containing isoxazoline or isoxazole ring systems, potential receptors in host—guest chemistry, have been prepared by multiple (double, triple or quadruple) 1,3-dipolar cycloadditions of nitrile oxides, (prepared in situ from hydroxamoyl chlorides) to bifunctional calixarenes, ethylene glycols, or silanes containing unsaturated ester or alkene moieties (453). This one-pot synthetic method has been readily extended to the preparation of different types of macrocycles such as cyclophanes, bis-calix[4]arenes and sila-macrocycles. The ring size of macrocycles can be controlled by appropriate choices of the nitrile oxide precursors and the bifunctional dipolarophiles. Multiple cycloadditive macrocy-clization is a potentially useful method for the synthesis of macrocycles. 

The ruthenium carbene catalysts 1 developed by Grubbs are distinguished by an exceptional tolerance towards polar functional groups [3]. Although generalizations are difficult and further experimental data are necessary in order to obtain a fully comprehensive picture, some trends may be deduced from the literature reports. Thus, many examples indicate that ethers, silyl ethers, acetals, esters, amides, carbamates, sulfonamides, silanes and various heterocyclic entities do not disturb. Moreover, ketones and even aldehyde functions are compatible, in contrast to reactions catalyzed by the molybdenum alkylidene complex 24 which is known to react with these groups under certain conditions [26]. Even unprotected alcohols and free carboxylic acids seem to be tolerated by 1. It should also be emphasized that the sensitivity of 1 toward the substitution pattern of alkenes outlined above usually leaves pre-existing di-, tri- and tetrasubstituted double bonds in the substrates unaffected. A nice example that illustrates many of these features is the clean dimerization of FK-506 45 to compound 46 reported by Schreiber et al. (Scheme 12) [27]. 

---