Sheet processing machine

For sheet processing machines, almost all machine manufacturers offer adjustable edge clamps. These are thus machine parts and not format parts. 

For slow-running machines (sheet processing machines), it is enough that the bottom area have the needed contours. 

A schematic illustration of seals in a sheet processing machine with a fixed format frame and a fixed format base can be seen in Figure 1.170 A(f) ... 

In thermoforming molds, water is mostly used as a cooling media. The cooling (water flow) can be calculated with the reduction of the heat volume. In sheet processing machines, part of the heat volume can be reduced using air which is blown onto the molded part with a cooling fan. The reduced heat volume using air can be 50% of the entire heat volume to be reduced. 

FIGURE 1.171 Mold construction for a sheet processing machine with adjustable clamping frame and adjustable base with automated feeding (company pictures Fa. ILLIG)... 

PROCESS MATERIAL. IMPACT EXTRUSION COLD FORMING COLD EXTRUSION SHEET METALWORK MACHINING POWDER METAL SINTERING... 

There is a material to process compatibility risk for impact extrusion, cold forging, cold extmsion, sheet metalworking, machining and powder metal sintering processes because their respective process capability maps relate to the ideal material case. 

Poly(ethylene terephthalate) film is produced by quenching extruded film to the amorphous state and then reheating and stretching the sheet approximately three-fold in each direction at 80-100°C. In a two-stage process machine direction stretching induces 10-14% crystallinity and this is raised to 20-25% by... 

The two-roll mill represents the earliest form of rubber processing machine, used by the rubber manufacturer being developed from the masticator of Hancock. Over the years the emphasis of the role of the two-roll mill has moved from being that of the prime means of compound preparation for the majority of the rubber industry, to that of secondary usage. In the modem factory conventional two-roll mills are used for compound blending and for sheeting off of compound mixed by other means. In addition they are used to warm-up compounds from store, and for a number of blending purposes to achieve compound uniformity for other processes. 

For condensable polyimides, the current processing methods are applicable only by the polyimide producer that sells finished parts, blanks, rods, sheets, films. .. Machining is an important method for processing the polyimide blanks. 

The majority of thermoforming production is by roll fed machines. Sheet fed machines are used for the smaller volume applications. Larger production units have in house sheet extrusion equipment. Because of the complexities in synchronising sheet extrusion equipment and the thermoforming machines, the two processes can be carried out independently of each other, the extruded sheet being produced in advance of production schedules. 

Obtained forms of foamed plastics are blocks, sheets, slabs, boards, molded products, and extruded shapes. These plastics can also be sprayed onto substrates to form coatings, foamed in place between walls (i.e., poured into the empty space in liquid form and allowed to foam), or used as a core in mechanical structures. It has also become possible to process foamed plastics by conventional processing machines like extruders and injection-molding machines. 

In the example of Fig. 14.11 the machine designed by KBE and CAD is able to adapt every of the 50 million possible combinations in the CAD model. According to the client s choice, the desired variant is adjusted with the product configurator. This variant is checked for doublets at any level of the structure and checked automatically in the PDM system. The parts can be produced directly in the connected sheet bend machine. The variant selection can be effected by an internet solution with the simplified model and, hence, can be directly passed to order management. The processing time for one job is reduced from days to hours. 

Advances in electrochemical knowledge and techniques have led to evermore sophisticated applications of electrodeposition. For example, knowledge of electrode potentials has made the electrodeposition of alloys possible and commercial. Methods have also been discovered to provide plastics with metal coatings. Similar techniques have been discovered to coat such rubber articles as gloves with a metallic layer. Worn or damaged metal objects can be returned to pristine condition by a process called electroforming. Some commercial metal objects, such as tubes, sheets, and machine parts, have been totally manufactured by electrodeposition (sometimes called electromachining). 

Figure 5. Sheet molding compound processing machine [from Ref. 30].

The CAPP system will be driven by input from the CAD system. CAPP features will include the determination of material, process, machine and tooling requirements and the development of process plans which detail how the house will be made. Process plans will include material routings and operations sheets detailing operations at each workstation. 

GE s Cycolac HXW Extrusion Grade ABS Sheets were used for this study. The sheets were 4.75 mm thick with a glass transition temperature of 116 C and a density of 1.037 g/cm, respectively. The ABS sheets were machined into 76.2 mm square samples and processed in the as-received condition. 

---