Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Separation techniques chromatography

Albumin Natural (plants, animals) Separation techniques (chromatography) Soluble in water... [Pg.537]

Specifications for sensors used as indicators generally are less strict than for sensors used for direct concentration determination. Long-term stability, selectivity and linearity play a less important role. In the case of detectors for separation techniques (chromatography and electrophoresis), even non-selective behaviour is preferred. [Pg.227]

Liquid chromatography is a separation technique based on the selective adsorption on a solid, siiica or alumina for example, or a mixture of the two, of the different components of a liquid mixture. [Pg.26]

Traditionally, chiral separations have been considered among the most difficult of all separations. Conventional separation techniques, such as distillation, Hquid—Hquid extraction, or even some forms of chromatography, are usually based on differences in analyte solubiUties or vapor pressures. However, in an achiral environment, enantiomers or optical isomers have identical physical and chemical properties. The general approach, then, is to create a "chiral environment" to achieve the desired chiral separation and requires chiral analyte—chiral selector interactions with more specificity than is obtainable with conventional techniques. [Pg.60]

Until separation techniques such as chromatography (28,29) and counter-current extraction had advanced sufficientiy to be of widespread use, the principal alkaloids were isolated from plant extracts and the minor constituents were either discarded or remained uninvestigated. With the advent of, first, column, then preparative thin layer, and now high pressure Hquid chromatography, even very low concentrations of materials of physiological significance can be obtained in commercial quantities. The alkaloid leurocristine (vincristine, 22, R = CHO), one of the more than 90 alkaloids found in Catharanthus roseus G. Don, from which it is isolated and then used in chemotherapy, occurs in concentrations of about 2 mg/100 kg of plant material. [Pg.533]

Biomolecule Separations. Advances in chemical separation techniques such as capillary zone electrophoresis (cze) and sedimentation field flow fractionation (sfff) allow for the isolation of nanogram quantities of amino acids and proteins, as weU as the characterization of large biomolecules (63—68) (see Biopolymers, analytical techniques). The two aforementioned techniques, as weU as chromatography and centrifugation, ate all based upon the differential migration of materials. Trends in the area of separations are toward the manipulation of smaller sample volumes, more rapid purification and analysis of materials, higher resolution of complex mixtures, milder conditions, and higher recovery (69). [Pg.396]

The use of separation techniques, such as gel permeation and high pressure Hquid chromatography interfaced with sensitive, silicon-specific aas or ICP detectors, has been particularly advantageous for the analysis of siUcones in environmental extracts (469,483—486). Supercritical fluid chromatography coupled with various detection devices is effective for the separation of siUcone oligomers that have molecular weights less than 3000 Da. Time-of-flight secondary ion mass spectrometry (TOF-sims) is appHcable up to 10,000 Da (487). [Pg.60]

Mixtures can be identified with the help of computer software that subtracts the spectra of pure compounds from that of the sample. For complex mixtures, fractionation may be needed as part of the analysis. Commercial instmments are available that combine ftir, as a detector, with a separation technique such as gas chromatography (gc), high performance Hquid chromatography (hplc), or supercritical fluid chromatography (96,97). Instmments such as gc/ftir are often termed hyphenated instmments (98). Pyrolyzer (99) and thermogravimetric analysis (tga) instmmentation can also be combined with ftir for monitoring pyrolysis and oxidation processes (100) (see Analytical methods, hyphenated instruments). [Pg.315]

Chromatography is a technique for separating and quantifying the constituents of a mixture. Separation techniques are essential for the characterization of the mixtures that result from most chemical processes. Chromatographic analysis is used in many areas of science and engineering in environmental studies, in the analysis of art objects, in industrial quahty control (qv), in analysis of biological materials, and in forensics (see Biopolymers, analytical TECHNIQUES FiNE ART EXAMINATION AND CONSERVATION FoRENSic CHEMISTRY). Most chemical laboratories employ one or more chromatographs for routine analysis (1). [Pg.104]

Chromatography Chromatography is a sorptive separation technique that allows multicomponent separations in both gas and Hquid phase. As a preparative tool, it is often used as a displacement-purge process, although many applications employ an inert-displacement mode, especially for use in analysis. General characteristics and operating modes are discussed in a separate part of this section. [Pg.1544]

D. E. Martire, Unified Approach to the Theory of Chromatography Incompressible Binary Mobile Phase (Liquid Chromatography) in Theoretical Advancement in Chromatography and Related Separation Techniques (Ed. F. Dondi, G. Guiochon, IGuwer, Academic Publishers, Dordrecht, The Netherlands,(l993)261. [Pg.85]

The mixture of diastereomers has been separated into its two principal components by Izatt, Haymore, Bradshaw and Christensen who had previously identified the two principal diastereomers as the cis-syn-cis and cis-anti-cis isomers. Their previous separation technique involved a protracted chromatography on alumina but the new method relied upon the difference in water solubility between the lead perchlorate and hydroniur perchlorate complexes. The lead perchlorate complex is essentially insoluble in aqueous solution and precipitates from it. Using this method, one may obtain 39% of the high-melting polymorph (mp 83—84°) and 44% of the low-melting compound (mp 62—63°). Note that the former also exists in a second crystalline form, mp 69—70°. [Pg.24]

This present chapter will not focus on the statistical theory of overlapping peaks and the deconvolution of complex mixtures, as this is treated in more detail in Chapter 1. It is worth remembering, however, that of all the separation techniques, it is gas chromatography which is generally applied to the analysis of the most complex mixtures that are encountered. Individual columns in gas chromatography can, of course, have extremely high individual peak capacities, for example, over 1000 with a 10 theoretical plates column (3), but even when columns such as these are... [Pg.46]

This chapter will first cover the nature of electrophoretic separations, especially those concerning capillary electrophoresis. Comprehensive multidimensional separations will then be defined, specifically in terms of orthogonality and resolution. The history of planar and non-comprehensive electrodriven separations will then be discussed. True comprehensive multidimensional separations involving chromatography and capillary electrophoresis will be described next. Finally, the future directions of these multidimensional techniques will be outlined. [Pg.197]

One example of normal-phase liquid chromatography coupled to gas chromatography is the determination of alkylated, oxygenated and nitrated polycyclic aromatic compounds (PACs) in urban air particulate extracts (97). Since such extracts are very complex, LC-GC is the best possible separation technique. A quartz microfibre filter retains the particulate material and supercritical fluid extraction (SPE) with CO2 and a toluene modifier extracts the organic components from the dust particles. The final extract is then dissolved in -hexane and analysed by NPLC. The transfer at 100 p.1 min of different fractions to the GC system by an on-column interface enabled many PACs to be detected by an ion-trap detector. A flame ionization detector (PID) and a 350 p.1 loop interface was used to quantify the identified compounds. The experimental conditions employed are shown in Table 13.2. [Pg.362]

Column Chromatography Column Chromatography is a useful separation technique for mixtures resulting from intermediate to small scale synthetic processes. For example, nitroferrocene is conveniently isolated from a mixture of the product, ferrocene, and l,r-dinitroferrocene by chromatography on Activity I basic alumina at about the 100-g scale (Chapter 7, Section XI). [Pg.185]


See other pages where Separation techniques chromatography is mentioned: [Pg.579]    [Pg.405]    [Pg.190]    [Pg.579]    [Pg.405]    [Pg.190]    [Pg.206]    [Pg.215]    [Pg.215]    [Pg.546]    [Pg.578]    [Pg.610]    [Pg.659]    [Pg.779]    [Pg.50]    [Pg.57]    [Pg.5]    [Pg.201]    [Pg.298]    [Pg.393]    [Pg.99]    [Pg.113]    [Pg.417]    [Pg.104]    [Pg.1312]    [Pg.278]    [Pg.6]    [Pg.469]    [Pg.102]    [Pg.13]    [Pg.126]    [Pg.144]    [Pg.303]    [Pg.330]    [Pg.8]    [Pg.18]   


SEARCH



Chromatographic separation techniques liquid column chromatography

Chromatography A Separation Technique

Chromatography separation

Comparison of supercritical fluid chromatography with other separation techniques for lipid characterization

High-performance liquid chromatography separation techniques

Hyphenated separation techniques, natural liquid chromatography

Micellar liquid chromatography separation technique

Separation techniques

Separation techniques gas chromatography

Separation techniques liquid chromatography

Separation techniques micellar electrokinetic chromatography

Separation techniques size exclusion chromatography

Skill 12.1 Demonstrating knowledge of various separation techniques (e.g., distillation, filtration, chromatography) and their basic principles

Thin-layer chromatography separation techniques

Thin-layer chromatography — The recovery of separated substances by elution techniques

© 2024 chempedia.info