Results and Validation

Holford NHG, Peace KE. Results and validation of a population pharmacodynamic model for cognitive effects in Alzheimer patient treated with tacrine. Proc Natl Acad Sci USA 1992 89 11471-5. 

ZEK (1999). Hydrogen research at Eorschungszentrum Karlsruhe. In "Proc. EIHP Workshop on Dissemination of Goals, Preliminary Results and Validation of Methodology", European Commission DG XII, acsessed 2003 at the website http / / www.eihp.org/eihpl / workshop/intro.html. 

Sample preparation plays a central role in the process, but it too often leads a wall-flower existence, with primary attention being directed to the determination step. This sense of priorities is reflected all too conspicuously in the equipment and investment planning of many analytical laboratories. However, a welcome trend in recent years points toward fuller recognition of the true importance of sample preparation in the quest for high-quality analytical results and valid conclusions [I], 12],... 

Eor example, Design reviews of functional spec and of code listings and test results and validation report. 

A study is at present being carried out to check and validate the feasability of acoustic emission monitoring of the pneumatic testing of tanks. This study is being carried out in the context of the CIAPES program. This article gives only a brief summary of the results obtained on various materials, and different types of vessels, under different operating conditions. 

When network weights have been trained to appropriate values, the NSC is ready to start classifying. The data set to be classified is specified in the same manner as previously used for the training and validation sets. The classifier is applied to data through the use of a menu and generates a list including filenames, suggested class and the neuron outputs from the output layer (used for decision). The result is currently presented in a simple text editor, from which it can be saved and included in other documents. 

This result is valid when a < 1 this hypothesis is verified since ultrasonic waves are attenuated in materials. For separating two echoes, we detect the peaks and measure the delay between them. 

In the nonclassical ion controversy discussed in Chapter 9, there was never any question on either side of the debate about the validity of the observed data, only about their interpretation. Had any of the experimental data been questioned or found to be incorrect, this would have been soon found out because so many people repeated and rechecked the data. This is the strength of science (in contrast to politics, economics, etc.), i.e., that we deal with reproducible experimental observation and data. Nevertheless, interpretation can still result in heated discussions or controversies, but science eventually will sort these out based on new results and data. 

The applicability of mesoscale techniques to systems difficult to describe in any other manner makes it likely that these simulations will continue to be used. At the present time, there is very little performance data available for these simulations. Researchers are advised to carefully consider the fundamental assumptions of these techniques and validate the results as much as possible. 

It would be difficult to over-estimate the extent to which the BET method has contributed to the development of those branches of physical chemistry such as heterogeneous catalysis, adsorption or particle size estimation, which involve finely divided or porous solids in all of these fields the BET surface area is a household phrase. But it is perhaps the very breadth of its scope which has led to a somewhat uncritical application of the method as a kind of infallible yardstick, and to a lack of appreciation of the nature of its basic assumptions or of the circumstances under which it may, or may not, be expected to yield a reliable result. This is particularly true of those solids which contain very fine pores and give rise to Langmuir-type isotherms, for the BET procedure may then give quite erroneous values for the surface area. If the pores are rather larger—tens to hundreds of Angstroms in width—the pore size distribution may be calculated from the adsorption isotherm of a vapour with the aid of the Kelvin equation, and within recent years a number of detailed procedures for carrying out the calculation have been put forward but all too often the limitations on the validity of the results, and the difficulty of interpretation in terms of the actual solid, tend to be insufficiently stressed or even entirely overlooked. And in the time-honoured method for the estimation of surface area from measurements of adsorption from solution, the complications introduced by... 

Before a procedure can provide useful analytical information, it is necessary to demonstrate that it is capable of providing acceptable results. Validation is an evaluation of whether the precision and accuracy obtained by following the procedure are appropriate for the problem. In addition, validation ensures that the written procedure has sufficient detail so that different analysts or laboratories following the same procedure obtain comparable results. Ideally, validation uses a standard sample whose composition closely matches the samples for which the procedure was developed. The comparison of replicate analyses can be used to evaluate the procedure s precision and accuracy. Intralaboratory and interlaboratory differences in the procedure also can be evaluated. In the absence of appropriate standards, accuracy can be evaluated by comparing results obtained with a new method to those obtained using a method of known accuracy. Chapter 14 provides a more detailed discussion of validation techniques. 

The ROTOBERTY internal recycle laboratory reactor was designed to produce experimental results that can be used for developing reaction kinetics and to test catalysts. These results are valid at the conditions of large-scale plant operations. Since internal flow rates contacting the catalyst are known, heat and mass transfer rates can be calculated between the catalyst and the recycling fluid. With these known, their influence on catalyst performance can be evaluated in the experiments as well as in production units. Operating conditions, some construction features, and performance characteristics are given next. 

QFD, FMEA and CA are useful in identifying eritieal eharaeteristies early on in produet development and the results from these ean be fed into DOE. DOE is useful in investigating and validating these eritieal eharaeteristies with respeet to teehnieal requirements and their influenee on produet and proeess quality. 

Numerical solution of Eq. (51) was carried out for a nonlocal effective Hamiltonian as well as for the approximated local Hamiltonian obtained by applying a gradient expansion. It was demonstrated that the nonlocal effective Hamiltonian represents quite well the lateral variation of the film density distribution. The results obtained showed also that the film behavior on the inhomogeneous substrate depends crucially on the temperature regime. Note that the film exhibits different wetting temperatures on both parts of the surface. For chemical potential below the bulk coexistence value the film thickness on both parts of the surface tends to appropriate assymptotic values at x cx) and obeys the power law x. Such a behavior of the film thickness is a consequence of van der Waals tails. The above result is valid when both parts of the surface exhibit either continuous (critical) or first-order wetting. 

The effects of confinement due to matrix species on the PMF between colloids is very well seen in Fig. 1(c). At a small matrix density, only the solvent effects contribute to the formation of the PMF. At a higher matrix density, the solvent preserves its role in modulating the PMF however, there appears another scale. The PMF also becomes modulated by matrix species additional repulsive maxima and attractive minima develop, reflecting configurations of colloids separated by one or two matrix particles or by a matrix particle covered by the solvent layer. It seems very difficult to simulate models of this sort. However, previous experience accumulated in the studies of bulk dispersions and validity of the PY closure results gives us confidence that the results presented are at least qualitatively correct. 

---