Repeat unit Ethylene

The table in Fig. 3.8 is calculated for a relatively large repeating unit, ethylene terephthalate (M = 192.16 Da, 22 atoms) and illustrates that at least 99% completion is necessary to drive the reaction to a range of lengths required for linear macromolecules. A DP of 100 is a macromolecule of 2,200 atoms and a molar mass of about 20,000 Da, both values typical for a polyester which is industrially useful. 

Ethylene-Tetrafluoroethylene Copolymer. Ethylene-tetralluoroethylene copolymer consists of linear chains in which the repeating unit is... 

Poly(ethylene Terephthalate). Poly(ethylene terephthalate) is prepared by the reaction of either terephthalic acid or dimethyl terephthalate with ethylene glycol, and its repeating unit has the general structure. 

Those polymers which are the condensation product of two different monomers are named by applying the preceding rules to the repeat unit. For example, the polyester formed by the condensation of ethylene glycol and terephthalic acid is called poly(oxyethylene oxyterphthaloyl) according to the lUPAC system, as well as poly (ethylene terephthalate) or polyethylene terephthalate. 

To some extent each of these objections is met by the presence of either chemical or crystallite crosslinking in the polymer. Another approach which complements the former is to incorporate rings into the backbone of the chemical chain. As an example, contrast the polyesters formed between ethylene glycol and either suberic or terephthaUc acid. Structures [V] and [VI], respectively, indicate the repeat units in these polymers ... 

Our discussion of stereoregularity in this chapter is primarily concerned with polymers of monosubstituted ethylene repeat units. We shall represent these by X... 

Glycols and epoxides react with maleic anhydride to give linear unsaturated polyesters (61,62). Ethylene glycol and maleic anhydride combine to form the following repeating unit. This reaction is the first step in industrially important polyester resin production (see Polyesters, unsaturated). 

The ester linkage in the repeating unit characterizes polyesters. R and R represent portions of the monomer molecule that do not participate in the polymerization. They may vary widely, giving rise to many different polyesters. Poly(ethylene terephthalate) (PET), made from ethylene glycol... 

Similarly, the random introduction by copolymerization of stericaHy incompatible repeating unit B into chains of crystalline A reduces the crystalline melting point and degree of crystallinity. If is reduced to T, crystals cannot form. Isotactic polypropylene and linear polyethylene homopolymers are each highly crystalline plastics. However, a random 65% ethylene—35% propylene copolymer of the two, poly(ethylene- (9-prop5lene) is a completely amorphous ethylene—propylene mbber (EPR). On the other hand, block copolymers of the two, poly(ethylene- -prop5iene) of the same overall composition, are highly crystalline. X-ray studies of these materials reveal both the polyethylene lattice and the isotactic polypropylene lattice, as the different blocks crystallize in thek own lattices. 

The monomer, norbomene (or bicyclo[2.2.l]hept-2-ene), is produced by the Diels-Alder addition of ethylene to cyclopentadiene. The monomer is polymerised by a ring-opening mechanism to give a linear polymer with a repeat unit containing both an in-chain five-membered ring and a double bond. Both cis-and trans- structures are obtainable according to the choice of catalyst used ... 

A related study used the air- and moisture-stable ionic liquids [RMIM][PFg] (R = butyl-decyl) as solvents for the oligomerization of ethylene to higher a-olefins [49]. The reaction used the cationic nickel complex 2 (Figure 7.4-1) under biphasic conditions to give oligomers of up to nine repeat units, with better selectivity and reactivity than obtained in conventional solvents. Recycling of the catalyst/ionic liquid solution was possible with little change in selectivity, and only a small drop in activity was observed. 

We ve seen on several occasions in previous chapters that a polymer, whether synthetic or biological, is a large molecule built up by repetitive bonding together of many smaller units, or monomers. Polyethylene, for instance, is a synthetic polymer made from ethylene (Section 7.10), nylon is a synthetic polyamide made from a diacid and a diamine (Section 21.9), and proteins are biological polyamides made from amino acids. Note that polymers are often drawn by indicating their repeating unit in parentheses. The repeat unit in polystyrene, for example, comes from the monomer styrene. 

By designing the repeat unit into the parent diene (containing either an alkyl branch or functionality), only a single type of repeat unit is formed upon polymerization, giving pure polymer microstructures. To date, perfectly controlled ADMET ethylene copolymers have included ethylene-CO,34 ethylene-vinyl alcohol,35 ethylene-vinyl acetate,36 and ethylene-propylene.20 Figure 8.12... 

This strategy is used for the synthesis of three different exact-mass telechelic oligomers. GPC, NMR, and GC/MS evidence indicates that clean depolymerization chemistry occurs for all three samples. Poly( 1,4-butadiene) (38) is broken down into oligomeric units with two, three, and four repeat units using catalyst 23. Catalyst 14 is more efficient and produces even lower molecular weight oligomers, primarily one and two repeat units. When allylchlorodimethylsilane is used instead of ethylene with 14, telechelic dimers are the only product. 

Other commercially relevant monomers have also been modeled in this study, including acrylates, styrene, and vinyl chloride.55 Symmetrical a,dienes substituted with the appropriate pendant functional group are polymerized via ADMET and utilized to model ethylene-styrene, ethylene-vinyl chloride, and ethylene-methyl acrylate copolymers. Since these models have perfect microstructure repeat units, they are a useful tool to study the effects of the functionality on the physical properties of these industrially important materials. The polymers produced have molecular weights in the range of 20,000-60,000, well within the range necessary to possess similar properties to commercial high-molecular-weight material. 

Polyethylene glycol (PEG) consists of repeating units of ethylene glycol forming linear or branched polymers with different molecular masses. Pegylation is the process by which PEG chains are covalently attached to lEN molecules. Pegylation confers a number of properties on lEN-a molecules, such as sustained blood levels that enhance antiviral effectiveness and reduce adverse reactions, as well as a longer half-life and improved patient compliance (Kozlowski et al. 2001). 

C13-0056. Draw the stmcture of the repeat unit of the polymer that forms from ethylene glycol and /)-phenylene diamine. 

The overwhelming majority of synthetic polymers is organic in nature, and it is on these that we will concentrate. The simplest and most common synthetic polymer is polyethylene, which will be our first example. Figure 1.1 shows the basic chemical structure of polyethylene. Pairs of hydrogen atoms are attached to the carbon atoms that make up the backbone. The repeat unit in this structure contains two carbon atoms and is derived from the ethylene monomer. In the case of polyethylene, the number of monomer residues, which is known as the polymerization... 

Figure 25.3 b) shows a generic polyester-based polyurethane. The most common polyester repeat units are derived from the polycondensation of adipic acid and a diol, such as ethylene glycol, which results in the structure shown in Fig, 25.4. The average molecular weight of the polyester sequences between urethane links commonly ranges between 400 and 6,000 g/mol. 

Isotactic, syndiotactic, and atactic polymers are possible for 1,2-polymerization — analogous to the situation for a mono-substituted ethylene. 1,4-Polymerization yields polymers in which the repeating unit can be either cis (XV) or trans (XVI)... 

A term that was used as a generic name for a new family of elastomers related to EPT. They are terpolymers and sulphur-vulcanisable. Sulphur atoms separate each of the ethylene and propylene repeating units in the backbone of the polymer chain, hence the name thiamer. Thickening Agent... 

Ethylene-Propylene Rubber (EPM/EPDM) Designation in ISO 1629 - EPM / EPDM Repeat Unit... 

Propylene oxide is a surface active monomer structurally similar to ethylene oxide and therefore of interest as a SHM W-SP, but with more than ten repeating units this polymer is not water soluble. A compositional isomer methyl vinyl ether is water soluble the adsorption behavior of this polymer (PMVE) is illustrated in Figure 4. At 1 ppm the rate of 7T increase is linear over three hours. The diffusion rate could be calculated if the W-SP s molecular weight were monodispersed. The polymer studied had a Gaussian molecular weight distribution, which is true of essentially all W-SPs even after attempts have been made to... 

The phosphate of ethylene glycol must derive from the ribitol phosphate moiety, which consequently is phosphorylated at a primary position, assumed to be 0-5 of (pro-D)-ribitol for biosynthetic reasons. In the proposed structure for the S10A repeating-unit (14), the anomeric natures of the sugar residues were not determined. The optical rotations of S10A and the hexasaccharide, [a]D +12° and +11°, respectively, indicate that they contain both a- and /3-D-linked sugar residues. 

A mer is the individual repeating unit from which a polymer is formed. Thus, polyethylene is made of ethylene units, the mer, bonded together. 

---