Temperature refrigerants

Com oil s flavor, color, stabiHty, retained clarity at refrigerator temperatures, polyunsaturated fatty acid composition, and vitamin E content make it a premium vegetable oil. The major uses are frying or salad appHcations (50%) and margarine formulations (35%). 

A simple cooling cycle serves to illustrate the concepts. Figure 1 shows a temperature—entropy plot for an actual refrigeration cycle. Gas at state 1 enters the compressor and its pressure and temperature are increased to state 2. There is a decrease in efficiency represented by the increase in entropy from state 1 to state 2 caused by friction, heat transfer, and other losses in the compressor. From state 2 to states 3 and 4 the gas is cooled and condensed by contact with a heat sink. Losses occur here because the refrigerant temperature must always be above the heat sink temperature for heat transfer to take... 

Wkiterization is a specialized appHcation of fractional crystallization that is utilized to remove saturates or waxes from Hquid oils. Salad oils, which do not cloud at refrigerator temperature, have been produced by winterizing lightly hydrogenated soybean ok. However, many producers now use refined, bleached, deodorized oks for this purpose (24). 

Margarine and butter contain fat plus water and water-soluble ingredients, eg, salt and milk soHds that impart flavor and color to the product. Generally these products are distributed at refrigerated temperatures to retain their quaHty. Greaseproof packaging, such as polyethylene-coated paperboard, aluminum foil/paper, parchment paper wraps, and polypropylene tubs, is used for butter and margarine (see Dairy substitutes). 

Random insertion of ethylene as comonomer and, in some cases, butene as termonomer, enhances clarity and depresses the polymer melting point and stiffness. Propylene—butene copolymers are also available (47). Consequendy, these polymers are used in apphcations where clarity is essential and as a sealant layer in polypropylene films. The impact resistance of these polymers is sligbdy superior to propylene homopolymers, especially at refrigeration temperatures, but still vastiy inferior to that of heterophasic copolymers. Properties of these polymers are shown in Table 4. 

Other Refrigeration Methods. Cryocoolers provide low temperature refrigeration on a smaller scale by a variety of thermodynamic cycles. The Stirling cycle foUows a path of isothermal compression, heat transfer to a regenerator matrix at constant volume, isothermal expansion with heat transfer from the external load at the refrigerator temperature, and finally heat transfer to the fluid from the regenerator at constant volume. 

The family of short curves in Fig. 29-45 shows the power efficiency of conventional refrigeration systems. The curves for the latter are taken from the Engineering Data Book, Gas Processors Suppliers Association, Tulsa, Oklahoma. The data refer to the evaporator temperature as the point at which refrigeration is removed. If the refrigeration is used to cool a stream over a temperature interval, the efficiency is obviously somewhat less. The short curves in Fig. 29-45 are for several refrigeration-temperature intervals. A comparison of these curves with the expander curve shows that the refrigeration power requirement by expansion compares favorably with mechanical refrigeration below 360° R (—100° F). The expander efficiency is favored by lower temperature at which heat is to be removed. 

High Compressor Check accumulator temperature. If refrigerant temperature Is normal,... 

High Process Check refrigerant temperature from 2. Premature opening of hot gas... 

If refrigerant temperature Is high and 3. Compressor valve failure. 

The solid material Is separated by filtration and the chloroform solution concentrated to an oil under reduced pressure. The oil is dissolved in 50 ml of trichloroethylene, the solution treated with charcoal, filtered and the filtrate added to 125 ml of hexane. The crystalline material which forms on standing at refrigerator temperature is removed by filtration, washed with light petroleum ether and dried at about 50°C. Approximately 20 g of product are obtained. On recrystaliizing from trichloroethylene-hexane, 17.8 g of purified compound are obtained, (VIP 89° to 91°C. 

Refrigerant temperatures greater than 32°F suggest the steam jet or lithium bromide absorption system. Between 30°F and —40°F, the ammonia-water absorption or a mechanical compression system is indicated. At less than —40°F, a mechanical compression is used, except in special desiccant situations. The economics of temperature level selection will depend on utility (steam, power) costs at the point of installation and the type of pay-out required, because in some tonnage ranges, the various systems are competitive based on first costs. 

Evaporator, refrigerant side 23.8 psig (38.5 psia). This corresponds to a boiling or evaporating refrigerant temperature of the required 10°F. See Reference 1 or other ammonia tables. 

Example 11-9. Systems Operating at Different Refrigerant Temperatures... 

Maceration of crnshed or gronnd material in methanol containing small amounts of HCl (<1%) is commonly used at refrigerated temperatures for times ranging from a few hours to overnight. The extracted material is usually too dilute for further analyses and the extraction procednre is usually followed by evaporation of the methanol using vacnnm and mild temperatures (30 to 40°C). Alternatively, the plant materials and solvents can be mixed well with a laboratory blender for a few minutes or a chemical-resistant stir bar for a longer time. Concentration of anthocyanin extracts can be done by rotary evaporation under vacuum conditions for volatile solvents or lyophilization for water. 

Storage of field samples at room or refrigerator temperatures (3 ° C.) may be equivalent to leaving in the field with regard to persistence and migration of the contained parathion. 

One attempted reaction of trinitromethane with impure ketone caused an explosion at refrigerator temperature. 

Figure 2.2 reports the historical development of refrigeration temperatures of matter. 

To carry out measurements at a fixed temperature, the refrigerator temperature must be kept constant for a suitably long time. The problem of the temperature control depends not only on the refrigerator itself, but on the thermal characteristics of the experiment. Let us now consider an oversimplified case in which heat capacities are neglected the mixing chamber temperature of a dilute refrigerator (DR) is to be controlled by a resistive heater HR and a d.c. power supply. 

In the quest to find other plants that are suitable as bioreactors, various monocoty-ledonous and dicotyledonous species have been tested. These include corn [16], rice and wheat [17], alfalfa [18], potato [19, 20], oilseed rape [21], pea [22], tomato [23] and soybean [24]. The major advantage of cereal crops is that recombinant proteins can be directed to accumulate in seeds, which are evolutionar specialized for storage and thus protect proteins from proteolytic degradation. Recombinant proteins are reported to remain stable in seeds for up to five months at room temperature [17] and for at least three years at refrigerator temperature without significant loss of activity [25]. In addition, the seed proteome is less complex than the leaf proteome, which makes purification quicker and more economical [26]. 

Next the liquid egg is added in small portions. The egg needs to be added cautiously lest the batter should curdle. The egg might be added over 5-10 min in five or six portions. It is extremely important that the egg is at ambient temperature and not at refrigerator temperature. Dumping in a cold mass of egg is likely to cause curdling, i.e. the oil in water emulsion breaks down. All the ingredients should be at ambient temperature but only the egg and possibly the fat are likely to be kept in a refrigerator. 

Stability — Samples remain stable for at least 468 days when frozen at -20°C. They are stable for at least five simulated freeze-and-thaw cycles and approximately 28 hr at room temperature. The analyte is viable for at least 6 days in a reconstitution solution stored in the autosampler (temperature set point at 10°C). A dried-down batch (sample process stopped at dry-down step) was stable at least 5 days in a refrigerator (temperature varied from 4 to 8°C). A stock solution of paricalcitol is stable for at least 11 months. Stock solution of internal standard is stable about 4.5 months under refrigeration. 

Food stored in a proper way and in proper conditions is not a vehicle of C. botulinum. Unlike non-proteolytic strains, proteolytic strains will not grow in refrigeration temperatures. The number of spores in meat and poultry is rather low, much higher numbers are observed in fish. If stored at 3 to 5°C, vacuum-packed, not very sour meat products usually remain safe for consumers up to 21 days. Botulin toxin was not detected in raw rockfish fillets or red snapper homogenates after being stored for 21 days at 4°C. None of 1074 samples of commercially packed fresh fish stored for 12 days at 12°C contained botulin toxin (Lilly and Kautter, 1990). 

Rodgers, S., Peiris, P. and Casadei, G., Inhibition of nonproteolytic Clostridium botulinum with lactic acid bacteria and their bacteriocins at refrigeration temperatures, J. Food Prot., 66, 674-678, 2003. 

---