References, substantiation

In such cases the development scheme for the original reserves may have to be modified to make processing capacity available for the new hydrocarbons. The economics of such a scheme can be affected negatively if substantial engineering modifications have to made to meet new safety legislation. For more background to ERD refer to Section 3. 

Experiments have shown promising results. For components in sintered state a number of components with different defects have been able to reject based on reference measurements on components without defects. For components in green state the results vary, cracks have been able to detect, but density differences not. For both measurements on components in green and sintered state scatter between measurements was observed to be substantial. 

The chemical potential now includes any such effects, and one refers to the gmvochemicalpotential, the electrochemical potential, etc. For example, if the system consists of a gas extending over a substantial difference in height, it is the gravochemical potential (which includes a tenn m.gh) that is the same at all levels, not the pressure. The electrochemical potential will be considered later. 

The third important source for infonnation on modem Raman spectroscopy are the books cataloguing the proceedings of the International Conference on Raman Spectroscopy (ICORS) [37]. ICORS is held every two years at various international locations and feahires hundreds of contributions from leading research groups covering all areas of Raman spectroscopy. Although the published presentations are quite limited in lengdi, they each contain references to the more substantial works and collectively provide an excellent overview of current trends m Raman spectroscopy. A snapshot or brief sununary of the 1998 conference appears at the end of this chapter. 

Over the years, as mentioned, I followed the practice that, whenever in a specific area of my research I felt that I had substantially achieved my goals and that it was time to consider shifting my emphasis elsewhere, I wrote (or edited) a book or comprehensive review of the field. My books are listed in the Appendix for interested readers who want to obtain more information or details, as well as relevant literature references. 

As mentioned in Chapter 14, it was my usual practice during my career that whenever I felt that I had substantially achieved my goals and interest in a specific field of my research, I wrote (or edited) a book or comprehensive monograph of the field. The interested reader may want to consult these for further details. They also contain extensive references to my 1200 original papers as well as to reviews and chapters. If not otherwise indicated, my books were all published by my longtime publisher, John Wiley Sons, Inc., in New York. 

The structural unit associated with an electronic transition m UV VIS spectroscopy IS called a chromophore Chemists often refer to model compounds to help interpret UV VIS spectra An appropriate model is a simple compound of known structure that mcor porates the chromophore suspected of being present m the sample Because remote sub stituents do not affect Xmax of the chromophore a strong similarity between the spectrum of the model compound and that of the unknown can serve to identify the kind of rr electron system present m the sample There is a substantial body of data concerning the UV VIS spectra of a great many chromophores as well as empirical correlations of sub stituent effects on k Such data are helpful when using UV VIS spectroscopy as a tool for structure determination... 

The many commercially attractive properties of acetal resins are due in large part to the inherent high crystallinity of the base polymers. Values reported for percentage crystallinity (x ray, density) range from 60 to 77%. The lower values are typical of copolymer. Poly oxymethylene most commonly crystallizes in a hexagonal unit cell (9) with the polymer chains in a 9/5 helix (10,11). An orthorhombic unit cell has also been reported (9). The oxyethylene units in copolymers of trioxane and ethylene oxide can be incorporated in the crystal lattice (12). The nominal value of the melting point of homopolymer is 175°C, that of the copolymer is 165°C. Other thermal properties, which depend substantially on the crystallization or melting of the polymer, are Hsted in Table 1. See also reference 13. 

Hot pressing to produce substantial texture and magnetic anisotropy via plastic deformation is accompHshed by a process referred to as... 

A residuum, often shortened to resid, is the residue obtained from petroleum after nondestmctive distillation has removed all the volatile materials. The temperature of the distillation is usually below 345°C because the rate of thermal decomposition of petroleum constituents is substantial above 350°C. Temperatures as high as 425°C can be employed in vacuum distillation. When such temperatures are employed and thermal decomposition occurs, the residuum is usually referred to as pitch. By inference, the name is used in the same manner as when it refers to the nonvolatile residue from the thermal decomposition of coal tar (3). 

Physical Properties. Both (1) and (2) are weak bases, showing 4.94 and 5.40, respectively. Their facile formation of crystalline salts with either inorganic or organic acids and complexes with Lewis acids is in each case of considerable interest. Selected physical data for quinoline and isoquinoline are given in Table 1. Reference 4 greatly expands the range of data treated and adds to them substantially. 

Other. Insoluble alkaline-earth metal and heavy metal stannates are prepared by the metathetic reaction of a soluble salt of the metal with a soluble alkah—metal stannate. They are used as additives to ceramic dielectric bodies (32). The use of bismuth stannate [12777-45-6] Bi2(Sn02)3 5H20, with barium titanate produces a ceramic capacitor body of uniform dielectric constant over a substantial temperature range (33). Ceramic and dielectric properties of individual stannates are given in Reference 34. Other typical commercially available stannates are barium stannate [12009-18-6] BaSnO calcium stannate [12013 6-6] CaSnO magnesium stannate [12032-29-0], MgSnO and strontium stannate [12143-34-9], SrSnO. ... 

---