Reductants ascorbic acid

In order to prevent the reduction between iron(II) and formaldoxime occurring, another iron complexing agent (potassium cyanide) was used in the presence of a reductant (ascorbic acid) that reduces iron(III) to iron(II). Aluminium, titanium, uranium, molybdenum and chromium also form light-coloured complexes that normally do not interfere in the determination of manganese in water or plant material by this method. If the aluminium or titanium concentrations are higher than 40 ppm an additional masking flow of tartrate is recommended [31]. 

A further example for the ad -el mechanism is the reaction of OH with the strong reductant ascorbic acid. This reaction, which leads to the oxidation of ascorbic acid to yield the ascorbate radical, proceeds by addtion to the olefinic bond of the reductone function followed by elimination of OH Abe, A. Okada, S. Nakao, R. Horii, T. Inoue, H. Taniguchi, S. Yamabe, S. J. Chem. Soc. Perkin Trans. 2 1992, 2221. 

Oxidation [KjFefCNJs, Ce(SO4)2] and reduction (ascorbic acid, N i2S2O4) studies... 

Reductant = ascorbic acid or hydroquinone Scheme 4.25 Suggested mechanism of copper-mediated reductive aminations of arylboronic acids with nitroso arenes. 

After a mean reaction time of 10 min, oxahc acid is added for two reasons ( ) to avoid reduction of the excess molybdate and (it) to eliminate the influence of phosphate present in the sample. As the silico complex has only a limited stability in the presence of oxalic acid, the reductant (ascorbic acid) is added immediately after the oxalic acid. The amoimt of ascorbic acid required is one quarter of that in the phosphate determination. No further acid need be added, as is the case in the metol-sulphite reduction. Hie blue silicomolybdic complex is formed within 30 min and is stable for several hours. 

Sorbitol is manufactured by the reduction of glucose in aqueous solution using hydrogen with a nickel catalyst. It is used in the manufacture of ascorbic acid (vitamin C), various surface active agents, foodstuffs, pharmaceuticals, cosmetics, dentifrices, adhesives, polyurethane foams, etc. 

Masking by oxidation or reduction of a metal ion to a state which does not react with EDTA is occasionally of value. For example, Fe(III) (log K- y 24.23) in acidic media may be reduced to Fe(II) (log K-yyy = 14.33) by ascorbic acid in this state iron does not interfere in the titration of some trivalent and tetravalent ions in strong acidic medium (pH 0 to 2). Similarly, Hg(II) can be reduced to the metal. In favorable conditions, Cr(III) may be oxidized by alkaline peroxide to chromate which does not complex with EDTA. 

Acetate, (reduction with) ascorbic acid + KI, citrate, V,V-dihydroxyethylglycine, EDTA, F , formate, NaOH + H2O2, oxidation to CrOJ , NagP30io, sulfosalicylate, tartrate, triethylam-ine, tiron... 

V (Reduction with) ascorbic acid, hydrazine, or NH2OH HCl, CN , EDTA, F , H2O2, manni-... 

Chromate(VI) Reduction with arsenate(III), ascorbic acid, hydrazine, hydroxylamine, sulfite, or thiosul-... 

Other Food Uses. Jellies, jams, and preserves use malic acid to balance flavor and adjust pH for pectin set. Canned fmits and vegetables employ malic acid in combination with ascorbic acid to produce a synergistic effect that aids in the reduction of browning. Wine and cider producers use malic acid in malolactic fermentation to provide bouquet and for pH adjustment. 

Iron Absorption. A very important effect of ascorbic acid is the enhancement of absorption of nonheme iron from foods. Ascorbic acid also enhances the reduction of ferric iron to ferrous iron. This is important both in increasing iron absorption and in its function in many hydroxylation reactions (140,141). In addition, ascorbic acid is involved in iron metaboHsm. It serves to transfer iron to the Hver and to incorporate it into ferritin. 

In this work, a method based on the reduction potential of ascorbic acid was developed for the sensitive detennination of trace of this compound. In this method ascorbic acid was added on the Cr(VI) solution to reduced that to Cr(III). Cr(III) produced in solution was quantitatively separated from the remainder of Cr(VI). The conditions were optimized for efficient extraction of Cr(III). The extracted Cr(III) was finally mineralized with nitric acid and sensitively analyzed by electro-thermal atomic absorption spectrometry. The determinations were carried out on a Varian AA-220 atomic absolution equipped with a GTA-110 graphite atomizer. The results obtained by this method were compared with those obtained by the other reported methods and it was cleared that the proposed method is more precise and able to determine the trace of ascorbic acid. Table shows the results obtained from the determination of ascorbic acid in two real samples by the proposed method and the spectrometric method based on reduction of Fe(III). 

It is shown that both Sb(III) and Bi(III) can speed reduction of 12-molybdophosphate (12-MPC) to the corresponding heteropoly blue (12-MPB) by ascorbic acid (AA). It is found that mixed polyoxometalates can be formed in solution which reduce considerably more rapidly than 12-MPC. Complete formation of mixed POM is observed only if significant excess of Me(III) ions is used in the reaction. POM responsible for blue color was synthesized by selective extraction. Chemical analysis of tetrabutyl-ammonium salt is in accordance with formula of (TBAl PMeflllfMo O j (Me = Sb, Bi). IR spectmm of mixed POM is identical to 12-MPC. 

Inorganic ar senic normally occurs in two oxidation states As(V) and As(III). Arsenic (V) gives a significantly lower response than ar senic (III). For pre-reduction As(V) to the As(III) concentrated hydrochloric acid and potassium iodide/ascorbic acid reagents were used. As organoarsenic compounds do not react with sodium tetrahydi oborate, they were decomposed with a mixture of HNO and on a hot plate. 

Phosphorus and Silicon in Waters, Effluents and Sludges [e.g. Phosphorus in Waters, Effluents and Sludges by Spectrophotometry-phosphomolybdenum blue method. Phosphorus in Waters and Acidic Digests by Spectrophotometry-phosphovanadomolybdate method. Ion Chromatographic Methods for the Determination of Phosphorus Compound, Pretreatment Methods for Phosphorus Determinations, Determination of silicon by Spectrophotometric Determination of Molybdate Reactive Silicon-1 -amino-2-naphthol-4, sulphonic acid (ANSA) or Metol reduction methods or ascorbic acid reduction method. Pretreatment Methods to Convert Other Eorms of Silicon to Soluble Molybdate Reactive Silicon, Determination of Phosphorus and Silicon Emission Spectrophotometry], 1992... 

Ascorbic acid, for example, is oxidized to dehydroascorbic acid with reduction of the iron(III) ions. The Fe(II) ions so produced react with 2,2 -bipyridine with formation of a colored complex. 

The yield of 3-hydroxyquinoline relative to the amount of quinoline consumed is low but is increased markedly by the presence of ascorbic acid. This was attributed to the regeneration of ferrous ions by reduction of the ferric ion formed in the first step of the reaction. 

Sometimes the metal may be transformed into a different oxidation state thus copper(II) may be reduced in acid solution by hydroxylamine or ascorbic acid. After rendering ammoniacal, nickel or cobalt can be titrated using, for example, murexide as indicator without interference from the copper, which is now present as Cu(I). Iron(III) can often be similarly masked by reduction with ascorbic acid. 

Other methods have been developed for the removal of oxygen (particularly from flowing streams). These include the use of electrochemical or chemical (zinc) scrubbers, nitrogen-activated nebulizers, and chemical reduction (by addition of sodium sulfite or ascorbic acid). Alternately, it may be useful to employ voltam-... 

Polypyrrole shows catalytic activity for the oxidation of ascorbic acid,221,222 catechols,221 and the quinone-hydroquinone couple 223 Polyaniline is active for the quinone-hydroquinone and Fe3+/Fe2+ couples,224,225 oxidation of hydrazine226 and formic acid,227 and reduction of nitric acid228 Poly(p-phenylene) is active for the oxidation of reduced nicotinamide adenine dinucleotide (NADH), catechol, ascorbic acid, acetaminophen, and p-aminophenol.229 Poly(3-methylthiophene) catalyzes the electrochemistry of a large number of neurotransmitters.230... 

Due to its electronic conductivity, polypyrrole can be grown to considerable thickness. It also constitutes, by itself, as a film on platinum or gold, a new type of electrode surface that exhibits catalytic activity in the electrochemical oxidation of ascorbic acid and dopamine in the reversible redox reactions of hydroquinones and the reduction of molecular oxygen iV-substituted pyrroles are excellent... 

CuCl, especially in a single crystal form, is extensively used as an optical material for its special optical properties. Orel et al. [2] first proposed a new method to obtain CuCl particles by the reduction of Cu with ascorbic acid. Several dispersants were used in the reduction and monodispersed CuCl particles can be obtained by selecting the proper dispersant and reduction conditions. In this work, the above method was used to modify the traditional process of CuCl preparation, namely, by reducing the Cu " with sodium sulfite to obtain the highly active CuCl catalyst to be used in the direct process of methylchlorosilane synthesis. 

Drugs can also Interfere with laboratory results by negating certain nonspecific oxidation and reduction reactions essential for the chemical assay. Penicillin, streptomycin and ascorbic acid are known to react with cupric Ion thus, false positive results for glucose may occur If a copper reduction method Is used. If the specific enzymatic glucose-oxidase method Is employed, ascorbic acid can cause a false negative result by preventing the oxidation of a specific chromogen In the reaction. 

---