Reactivity abnormality

In the other types of abnormalities, the event classification follows those of LWRs because the components such as the valves and the control rod drives are expected to be similar to those of PWRs or BWRs. In the category of the reactivity abnormality, the incidents related to the control rods are taken from those of PWRs. The loss of feedwater heating is taken like BWRs. Most of the incidents of the pressure abnormality are taken from BWRs because the Super LWR also adopts the direct steam cycle. The reactor depressurization is taken from PWRs. The abnormalities categorized into the inadvertent start or malfunction of core cooling system are taken from those of PWRs or BWRs. The inadvertent startup of AFS of the Super LWR corresponds to the inadvertent startup of ECCS of PWRs. The core coolant flow control system failure is the same as the feedwater control system failure for the Super LWR while the two incidents are different in BWRs due to the recirculation system. All the accidents categorized into the loss... 

For the safety analysis, the abnormal transients and accidents are taken from each category as the reactivity abnormality, pressure abnormality, reactor coolant flow abnormality, and inadvertent start or malfunction of core cooling system in Table 6.4 except the CR assembly misalignment and drop transient, and the depressurization of core cooling system transient. They are shown in Table 6.5. 

The reactivity of the transition metals towards other elements varies widely. In theory, the tendency to form other compounds both in the solid state (for example reactions to form cations) should diminish along the series in practice, resistance to reaction with oxygen (due to formation of a surface layer of oxide) causes chromium (for example) to behave abnormally hence regularities in reactivity are not easily observed. It is now appropriate to consider the individual transition metals. 

Control of the core is affected by movable control rods which contain neutron absorbers soluble neutron absorbers ia the coolant, called chemical shim fixed burnable neutron absorbers and the intrinsic feature of negative reactivity coefficients. Gross changes ia fission reaction rates, as well as start-up and shutdown of the fission reactions, are effected by the control rods. In a typical PWR, ca 90 control rods are used. These, iaserted from the top of the core, contain strong neutron absorbers such as boron, cadmium, or hafnium, and are made up of a cadmium—iadium—silver alloy, clad ia stainless steel. The movement of the control rods is governed remotely by an operator ia the control room. Safety circuitry automatically iaserts the rods ia the event of an abnormal power or reactivity transient. 

Toxic reactions occur by several mechanisms activation of metabolism, production of reactive intermediates and subsequent reactions with cell macromolecules, changing receptor responses, or through abnormal defence reactions. Several compounds cause toxicity by mimicking the organism s own hormones or neurotransmitters, or activating the body s endogenous receptors in some non-physiological way. ... 

The position of aniline in the above reactivity order deserves special comment. Aniline is less basic than pyridine by a relatively small factor, 0.65 pA units, but is appreciably more polarizable it then seems likely that the inverted order of reactivity is caused by the polarizability term in accordance with Edwards equation. If this is correct, in the reactivity order piperidine > aniline > pyridine, inversion with respect to basicity appears to result from an abnormally high reactivity of aniline rather than from a particularly low reactivity of pyridine. This view differs from that based on relative steric requirements of the reagents, but other factors besides basicity and polarizability may well contribute to the quantitative experimental picture. 

Such functionality can also be of great practical importance since functional initiators, transfer agents, etc. are applied to prepare end-functional polymers (see Section 7.5) or block or graft copolymers (Section 7.6). In these cases the need to maximize the fraction of chains that contain the reactive or other desired functionality is obvious. However, there are also well-documented cases where weak links formed by initiation, termination, or abnormal propagation processes impair the thermal or photochemical stability of polymers. 

The validity of these macroscale arguments is questionable, however, when microquantities are involved, or when abnormally reactive fragments may be present. 

The dendrites of neurons adjacent to those which degenerate also show extensive growth and sprouting which could facilitate abnormal and disorganised synaptic transmission and cause hyperactivity. It is also known that the dendrites of cells around an alumina focus in monkeys, as well as in human epileptic brain, lose their spinous processes, which might contribute to the paroxysmal discharge by facilitating the spread of depolarisation to the neuron soma. Certainly an increase in the number of Na+ channels on the dendrites of spinal motoneurons, which would facilitate the occurrence of reactive dendritic Na+ spikes, has been seen after axotomy. 

Bidentate NHC-Pd complexes have been tested as hydrogenation catalysts of cyclooctene under mild conditions (room temperature, 1 atm, ethanol). The complex 22 (Fig. 2.5), featuring abnormal carbene binding from the O carbon of the imidazole heterocycles, has stronger Pd-C jj, bonds and more nucleophilic metal centre than the bound normal carbene chelate 21. The different ligand properties are reflected in the superior activity of 22 in the hydrogenation of cyclooctene at 1-2 mol% loadings under mild conditions. The exact reasons for the reactivity difference in terms of elementary reaction steps are not clearly understood [19]. 

Nonspecific findings such as thrombocytopenia, elevated erythrocyte sedimentation rate or C-reactive protein, and abnormal urinalysis (i.e., proteinuria or microscopic hematuria)... 

The lack of reactivity of (45) and CEP-pyrrole towards alcohols is attributed, at least partly, to the double bond character of the phosphorus-nitrogen bond as evidenced by the crystallographically determined abnormally short P-N bond lengths. 

Hutchison, K.E., LaChance, H., Niaura, R., Bryan, A., Smolen, A. The DRD4 VNTR polymorphism influences reactivity to smoking cues. J. Abnormal Psychol. 111 134, 2002. 

Laboratory abnormalities that may be seen include normocytic, normochromic anemia thrombocytosis or thrombocytopenia leukopenia elevated erythrocyte sedimentation rate and C-reactive protein positive... 

It is more difficult to interpret micellar effects upon reactions of azide ion. The behavior is normal , in the sense that k /kw 1, for deacylation, an Sn2 reaction, and addition to a carbocation (Table 4) (Cuenca, 1985). But the micellar reaction is much faster for nucleophilic aromatic substitution. Values of k /kw depend upon the substrate and are slightly larger when both N 3 and an inert counterion are present, but the trends are the same. We have no explanation for these results, although there seems to be a relation between the anomalous behavior of the azide ion in micellar reactions of aromatic substrates and its nucleophilicity in water and similar polar, hydroxylic solvents. Azide is a very powerful nucleophile towards carboca-tions, based on Ritchie s N+ scale, but in water it is much less reactive towards 2,4-dinitrohalobenzenes than predicted, whereas the reactivity of other nucleophiles fits the N+ scale (Ritchie and Sawada, 1977). Therefore the large values of k /kw may reflect the fact that azide ion is unusually unreactive in aromatic nucleophilic substitution in water, rather than that it is abnormally reactive in micelles. 

The main business of most chemical companies is to manufacture products by means of controlled chemical reactions. The reactivity that makes chemicals useful can also make them hazardous. Chemical reactions are usually carried out without mishap, but sometimes they get out of control because of problems such as the wrong or contaminated raw material being used, changed operating conditions, unanticipated time delays, failed equipment, incompatible materials of construction, or loss of temperature control. Such mishaps can be worse if the chemistiy under both normal and abnormal conditions is not fully understood. Therefore, it is essential that chemical process designers and operators understand the nature of the reactive materials andchemistry involved and what it takes to control intended reactions and avoid unintended reactions throughout the entire life cycle of a process facility. 

Abnormal heat addition to the reactive material or mixture, such as by an external fire or the injection of steam to a vessel jacket or directly into the material or mixture... 

---