Quality Chemicals International

These reports were in addition to the internal reporting for OSHA PSM and various local or state requirements. While Quality Chemical had long ago consolidated a number of these programs, there were still four different accident/incident reporting systems—one for external reporting of releases, one for external reporting of injuries and other nonrelease events, one for a corporate-wide database and one for each site itself. 

Report 46 Quality Today in Polymer Processing, S.H. Coulson, J.A. Cousans, Exxon Chemical International Marketing. 

Abstract By the definition of the mole as a base unit for amount-of-substance measures within the International System of Units (SI), chemists can make chemical measurements in full compliance with established metrological principles. Since the mole requires exact knowledge of the chemical entity, which is often neither available nor of practical relevance to the purpose of the measurement, the SI units of mass or length (for volume) are unavoidable in the expression of results of many chemical measurements. Science, technology, and trade depend upon a huge and ever increasing number and variety of chemical determinations to quantify material composition and quality. Thus, international harmonization in the assessments of processes, procedures, and results is highly desirable and clearly cost effective. The authors, with relevant experience and re-... 

To reach an oil quality of international commercial standard, the crude oil is generally redistilled. The rectified oil contains about 75% carbonyl compounds (chemical analysis) which correspond to 70-72% citral (GC). 

The quality of a drug substance is controlled by its specification. An internationally harmonized guideline on specifications and tests for chemical substances as active ingredients and in drug products makes reference to chiral compounds. This has recently been finalized and is discussed in Section 13.5.2. 

The first use of new plant, or start-up after a shutdown, poses corrosion hazards additional to those encountered in normal operation. New plant such as boilers requires special water treatment, involving boil-out, passivation and possible chemical cleaning. Actual requirements depend on the boiler type, the proposed service, the quality of water available during commissioning and the internal condition of the boiler. The condition of the boiler depends on for how long and in what conditions it has been stored. The presence of any salts, dirt or rust is harmful. An adherent, protective layer of magnetite in normal operation... 

As a consequence, highly rated boilers require higher quality, preboiler water treatment and very careful attention to the internal chemical treatments used and the overall internal water chemistry. 

NOTE Drum internals should be designed so that thorough mixing ofFW and BW occurs, the most concentrated BW is blown down, steam is effectively separated with due regard to quality and purity, and chemicals are properly introduced into an area of rapid mixing. Thus ... 

The design equations for a chemical reactor contain several parameters that are functions of temperature. Equation (7.17) applies to a nonisothermal batch reactor and is exemplary of the physical property variations that can be important even for ideal reactors. Note that the word ideal has three uses in this chapter. In connection with reactors, ideal refers to the quality of mixing in the vessel. Ideal batch reactors and CSTRs have perfect internal mixing. Ideal PFRs are perfectly mixed in the radial direction and have no mixing in the axial direction. These ideal reactors may be nonisothermal and may have physical properties that vary with temperature, pressure, and composition. 

Internal heat exchange is realized by heat conduction from the microstructured reaction zone to a mini channel heat exchanger, positioned in the rear of the reaction zone [1,3,4], The falling film micro reactor can be equipped, additionally, with an inspection window. This allows a visually check of the quality of film formation and identification of flow misdistribution. Furthermore, photochemical gas/liquid contacting can be carried out, given transparency of the window material for the band range of interest [6], In some cases an inspection window made of silicon was used to allow observation of temperature changes caused by chemical reactions or physical interactions by an IR camera [4, 5]. 

Established in 1894, AOAC International is an independent association of scientists and organizations in the public and private sectors devoted to promoting methods validation and quality measurements in the analytical sciences. AOAC has a mission to ensure the development, testing, validation, and publication of reliable chemical and biological methods of analysis for foods, drugs, feed-stuffs, fertilizers, pesticides, water, forensic materials and other substances affecting public health and safety and the environment. 

EURACHEM is a network of organizations in Europe, having the objective of establishing a system for the international traceability of chemical measurements and the promotion of good quality practices. It provides a forum for the discussion of common problems and for developing an informed and considered approach to both technical and policy issues. 

Within Europe there are thousands of organizations concerned with analytical measurement. However, within the broad field of testing, chemical measurement has generally been poorly represented. EURACHEM was established to address this concern by enabling analytical laboratories to work together, across international boundaries, on analytical measurement issues. EURACHEM s uniqueness as an organization comes from its primary concern, which is the analytical quality of chemical measurement. 

The UK Government has, for more than six years, funded the Valid Analytical Measurement (VAM) Programme, which is aimed at improving the quality and comparability of analytical measurements. The work undertaken within VAM is key to the underpinning of a modern physico-chemical and biochemical National Measurement System, By disseminating the activities of VAM across international boundaries and linking with other national measurement system VAM also aims to ensure the comparability of data worldwide. Thus VAM provides an infrastructure under which reliable measurements can be made for trade, regulation and health and safety provision. 

Exaggerated chemical application rates may also adversely affect the crop quality. If the exaggerated rate causes the crop to be abnormal in some way at maturity, the processing applied to the crop may not result in typical fraction samples. The adverse impact may be obvious, such as slowed maturation of the crop, or the impact may be less obvious, such as a change to the internal structure of the individual fruits and vegetables, grains, nuts or roots. 

---