Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Protective classification

A hostile work environment is a form of harassment where the employee may not have suffered a tangible employment action but the employee is subject to unwelcome conduct which (1) is based on the anployee s protected classification (such as age or sex) (2) is severe or pervasive that it alters the terms and conditions of the employee s anployment situation and (3) creates a hostile or abusive environment for the employee. Safety professionals should be aware that conduct by other employees or management may be considered unwelcome if the anployee doesn t invite the comments, actions, etc., and/or if the anployee doesn t want the actions, comments, etc., to happen. Some examples of unwelcome conduct includes unwelcome touching, racial slurs, cartoons of an offensive nature, jokes, horseplay, insults, and gestures. [Pg.4]

Safety professionals should be aware that there are three (3) predominate theories under which discrimination can take form. The first theory is that of Disparate Treatment. Under the Disparate Treatment theory, the discrimination takes the form of intentionally treating individuals differently due to their race, sex, or other protected classification or characteristic. For example, the disparate treatment theory would apply where an employer denies a job to an individual because the individual is of a specific race or the safety professional only permits the male members of the safety team to travel to the safety conference. [Pg.4]

Table 1. Lightning protection classification of PV power stations. [Pg.224]

Type 4 but with corrosion resistance. The European rating is based on IP protection classifications outlined in lEC publication 529 [244]. IP classifications are based on a two-number code. The first number designates the degree of protection against touch and foreign bodies, and the second number designates protection against water (see Tables 4 and 5). [Pg.123]

Classification Societies exist to promote the safe construction of ships and to protect that condition throughout the life of the vessel. One of the tools available to shipbuilders, shipowners and surveyors that can be used to achieve these aims is Non-Destructive Examination (NDE). The intent of this presentation is to describe the application of NDE to hull structure during construction and also during periodic surveys as seen from the viewpoint of the Classification Surveyor. [Pg.1041]

Eor evaluation of a particular laser installation, the standard should be consulted to determine the classification of the laser and appropriate safety measures. The maximum permissible exposure for the particular laser also should be determined in order to select the appropriate protective eyewear. [Pg.12]

The U.S. Eood and Dmg Administration (EDA) adopted a legally binding standard, which took the form of a performance standard for laser products (56,57). The standard provides a classification scheme for lasers similar to the ANSI classification. AH lasers sold after August 2, 1976 must comply with its provisions. The standard requires incorporation of safety-related labeling and protective equipment according to the class of the laser. The primary impact of the EDA standard is on laser manufacturers and scientific supply firms. [Pg.12]

Smaller amounts of phosphoms, or elemental phosphoms-containing materials, are also shipped in 115-L (30-gal) dmms that are DOT regulated (U.S. DOT lAl or 1A2 classification) and have thick shells and special gaskets and fittings for protection. Quantities up to 0.5 kg (1 lb) are allowed for shipping in two hermetically sealed (soldered), nested cans inside a wooden box where the empty space is filled with vermiculite (U.S. DOT 4C1, 4C2, 4D, or 4F classification). AH air transportation of elemental P, both U.S. and international, was prohibited beginning in 1992. [Pg.352]

Fig. 14. Outside battery limit (OSBL) equipment spacing. Minimum spacing for off-site equipment is in meters. Classifications of tankage are Class 1 high ha2ard, flash point below 38°C Class 2 low ha2ard, flash point above 38°C. NFPA = National Fine Protection Association. Safety standards are calculated... Fig. 14. Outside battery limit (OSBL) equipment spacing. Minimum spacing for off-site equipment is in meters. Classifications of tankage are Class 1 high ha2ard, flash point below 38°C Class 2 low ha2ard, flash point above 38°C. NFPA = National Fine Protection Association. Safety standards are calculated...
Units are available in stainless steel or protected mild steel, often prefabricated, up to 12.5 m in diameter, capable of processing >5 m /s depending on the separation efficiency required. When the separator is used for classification of granular soflds, smaller-diameter (<4 m) units are used, separating nearly all particles coarser than - 150 fim. [Pg.322]

Uniform Freight Classification Committee, Rules 40 and 41 American Bureau of Shipping National Cargo Bureau National Motor Freight Traffic Association National Motor Freight Classification National Fire Protection Association... [Pg.1949]

Except for areas with fire or explosion hazards (hazardous areas), motor enclosures are designed to provide protection to the internal working parts. The development or improved insiilating materials and finishes has affec ted the required degree of protection and consequently the design and classification of enclosures. Examples of several types of enclosures are shown in Fig. 29-4. [Pg.2487]

Tayout also has a significant role in minimizing the probability of ignition of a flammable release. Area electrical classification provides the basis for the control of electrical ignition sources. This classification is also used to determine the areas that require protection from vehicular access, etc. Frequently, highly hazardous processes that can result in overpressure (e.g., hydrogenation) are placed behind blast resistant structures/walls. [Pg.27]

NFPA 497 Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas, 1997 edition. National Fire Protection Association, Quincy, MA. [Pg.155]

S/I991 Rotating electrical machines Classification of degrees of protection provided by enclosures for rotating machinery 4691/1985 BS 4999-105/1988 ... [Pg.192]

Selection of gapless surge arrester Classification of arresters Surge protection of motors Pressure relief facility Assessing the condition of an arrester... [Pg.997]

The force-ventilated type is preferred when a Division 1 classification is necessary. The standard drip-proof enclosure is preferred in Division 2 or in safe locations. For an outdoor installation, serious consideration should be given to using NEMA Type 2 weather-protected enclosures rather than the completely enclosed types. [Pg.276]

Respiratory protective devices - Classification superseded BS 6928 1988 Respiratory protective devices - List of equivalent terms. Supersedes BS 6930 1988 Respiratory protective devices - Full face masks - Requirements, testing, marking. Supersedes BS EN 136-10 1992 and BS 7355 1990... [Pg.590]

Classification of environmental conditions. Part 3 Classification of groups of environmental parameters and their seventies. Storage. Superseded BS EN 60721-3-1 1993 Classification of environmental conditions. Part 3 Classification of groups of environmental parameters and their seventies. Transportation. Superseded BS EN 60721-3-2 1993 AMD 1 Classification of environmental conditions. Part 3 Classification of groups of environmental parameters and their seventies. Stationary use at weather protected locations (AMD 9514J dated 15 June 1997. Superseded BS EN 60721-3-3 1993. Previously BS 7527 Section 3.3 1991... [Pg.592]

Having discussed tlie fundamental cliaracteristics of fires in general and tlie different types of fire, we now e.xamine more closely fire accidents tliat occur in process pkuits. Specifically, we review plant fire classifications, sources, causes, damage potentials, and detection and protection systems. [Pg.214]

The National Fire Protection Association recognizes four general classification of fires."... [Pg.215]


See other pages where Protective classification is mentioned: [Pg.649]    [Pg.649]    [Pg.1050]    [Pg.219]    [Pg.349]    [Pg.388]    [Pg.49]    [Pg.79]    [Pg.321]    [Pg.12]    [Pg.319]    [Pg.505]    [Pg.30]    [Pg.48]    [Pg.54]    [Pg.786]    [Pg.1831]    [Pg.1944]    [Pg.5]    [Pg.457]    [Pg.436]    [Pg.124]    [Pg.339]   
See also in sourсe #XX -- [ Pg.432 ]




SEARCH



Classification Of Protection Measures Against Explosions

Classification protective gloves

Explosion protected apparatus temperature classification

Explosion protection electrical area classification

Grouping and classification of explosion protected electrical apparatus

© 2024 chempedia.info