Masks full-face

Filtering devices Half or quarter mask and filter Filtering half-mask without inhalation valves Valved filtering half masks Filtering half masks Full face mask and filter Power assisted filtering device with full, half or quarter masks Power filtering device with helmet or hood 4-40... 

Respiratory protective devices - Classification superseded BS 6928 1988 Respiratory protective devices - List of equivalent terms. Supersedes BS 6930 1988 Respiratory protective devices - Full face masks - Requirements, testing, marking. Supersedes BS EN 136-10 1992 and BS 7355 1990... 

AMD 2 Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly - Requirements, testing, marking (AMD 10774J dated Januai-y 2000. With BS EN 138, BS EN 269 and BS EN 270, superseded BS 4667-3 1974... 

Materials hazardous to health, but areas may be entered freely with full-faced mask self-contained breathing apparatus which provides eye protection. 

Health Hazards - Personal Protective Equipment Full face mask and acid gas canister self-contained breathing apparatus chemical goggles mbber apron and gloves acid-proof clothing safety shower Symptoms Following Exposure Severely irritating to nose and upper respiratory tract lung injury Treatment for Exposure INHALATION immediately remove patient to fir h air, keep him warm and... 

BS7355 Respiratory protective devices (full-face masks). 

Withdrawn) 1990 Full face masks for respiratory protective devices. Withdrawn, superseded by BS EN 136 1998... 

Safety shoes and eyewash. Positive pressure air line with full-face mask and escape bottle or self-contained breathing apparatus should be available for emergency use. 

For handling acrolein, gloves, vapor-proof goggles or a full face mask, and other protective clothing are mandatory (Albin 1962 Beauchamp et al. 1985 NIOSH 1990). Acrolein spills should be neutralized with 10% sodium bisulfite solutions (Albin 1962). Air packs or fresh-air breathing masks, safety showers, and eye baths should be available wherever acrolein is handled (Beauchamp... 

Full face mask with chemical canister MSA Industrial Canister, Gas Mask3 02 > 19.5% type N canister for concentrations less than 100 times PEL and less than the IDLH concentration for acid gases, CO, ammonia, and organic vapors escape concentrations of 2% for acid gases, CO, and organic vapors and 3% for ammonia escape capacity less than 6 min... 

Two examples of air purifying respirators are the MSA Ultra-Twin full-face respirator (Mine Safety Appliances Company [MSA], Pittsburgh, PA), and the 3M Model 6800 full-face mask (3M, St. Paul, MN). Figure 6.7 shows an air-purifying respirator. 

Are there two suitable full face masks with ammonia canisters as approved by the Bureau of Mines Is self-contained breathing air apparatus required in concentrated atmospheres ... 

Sampling is usually done by two persons, each equipped with a full-face mask and heavy rubber gloves. Connect to the unloading valve in the dome of the tank a stainless-steel sampling line with a 1-inch union and a 4-inch valve, and attach to the sampling line by a... 

The Germans, like the British, also first used pads soaked in sodium carbonate and sodium thiosulphate, but then went on to develop a full face mask (which inspired the British Box designs). This was followed by a respirator, known simply as The German Mask , with a facepiece of natural rubber (later of oiled leather when rubber became unavailable), twin circular eyepieces with outer lenses of celluloid and inner lenses of coated gelatin, and a filter canister that screwed directly into the facepiece another design feature still used in most present-day respirators. 

---