Production imperatives

Knowledge of sulfur content in petroleum products is imperative the analytical methods are numerous and depend on both the concentration being measured and the material being analyzed. 

Ceramic—metal interfaces are generally formed at high temperatures. Diffusion and chemical reaction kinetics are faster at elevated temperatures. Knowledge of the chemical reaction products and, if possible, their properties are needed. It is therefore imperative to understand the thermodynamics and kinetics of reactions such that processing can be controlled and optimum properties obtained. 

The fact that ceU culture-derived products are often injected into humans as therapeutic agents makes it imperative that there be no component in the final product that can pose a potential health risk to the patient. Health risks can be introduced into a product from many sources including the ceUs themselves raw materials, such as semm, media components, etc materials used in purification, eg, antibodies and external contamination. Eor a therapeutic product such risk factors are identified at the outset and ways of reducing them to acceptable levels are designed into the process. Before a product is released by the EDA the manufacturer has to demonstrate this risk reduction by rigorous validation of the process. 

In the development of new products, optimization of the fermentation medium for titer only often ignores the consequences of the medium properties on subsequent downstream processing steps such as filtration and chromatography. It is imperative, therefore, that there be effective communication and understanding between workers on the upstream and downstream phases of the produc t development if rational trade-offs are to be made to ensure overall optimahty of the process. One example is to make the conscious decision, in collaboration with those responsible for the downstream operations, whether to produce a protein in an unfolded form or in its native folded form the purification of the aggregated unfolded proteins is simpler than that of the native protein, but the refolding process itself to obtain the product in its final form may lack scalabihty. 

When purchasing GPC/SEC columns it is imperative to realize that no manufacturer has a technical edge on another. The products are analogous, with the primary difference being price. When one buys a GPC/SEC column, it is the service of gel preparation and column packing that is really purchased. We have provided the formulae and directions for the preparation of GPC gels because we do not want our customers to pay for a service that they themselves can do for less. 

In the alkylation of enolate anions, a mixture of mono- and polyalky lation produets is usually obtained, and when enolization of a di-a-methylene ketone is possible toward both sides, a mixture of di-a- and a,a -dialkylation products ean be expeeted. Thus the enamine alkylation sequenee beeomes partieularly attractive when eontrolled monoalkylation is imperative beeause of difficulties in separation of a mixture of alkylation produets. One of its first synthetie applications was in the reaetions of /8-tetralones with alkyl halides. Yields in exeess of 80% were usually found 238-243) in these reaetions, which make valuable intermediates for steroid and diterpene syntheses more aecessible. 

The main difference between the two types are that the reaction products of the silico fluoride types are less soluble in water and are also harder, which may give better in-service performance but at a slightly higher material cost. However, with recent developments in floor-laying techniques, the concrete substrates for industrial floors are laid with much more dense low-porosity surfaces, so that neither silicate nor silico fluoride treatments are as effective as they used to be, when the concrete used had a slightly more open finish and hence was more receptive to these treatments. With modern concrete floors, it is imperative to wash any material not absorbed into the surface within a short period. Otherwise, unpleasant white alkaline deposits, which are difficult to remove, may occur. 

A valuable feature of the Nin/Crn-mediated Nozaki-Takai-Hiyama-Kishi coupling of vinyl iodides and aldehydes is that the stereochemistry of the vinyl iodide partner is reflected in the allylic alcohol coupling product, at least when disubstituted or trans tri-substituted vinyl iodides are employed.68 It is, therefore, imperative that the trans vinyl iodide stereochemistry in 159 be rigorously defined. Of the various ways in which this objective could be achieved, a regioselective syn addition of the Zr-H bond of Schwartz s reagent (Cp2ZrHCl) to the alkyne function in 165, followed by exposure of the resulting vinylzirconium species to iodine, seemed to constitute a distinctly direct solution to this important problem. Alkyne 165 could conceivably be derived in short order from compound 166, the projected product of an asymmetric crotylboration of achiral aldehyde 168. 

It is imperative to use a hot narrow column to prevent crystallization and to avoid passage of dark material through the column. The column was made in a Liebig condenser of diameter 6 mm. The Plorisil filled 14 cm. of the condenser. A temperature of 70-80° is sufficient to melt even pure product but still avoid passage of dark material. 

Cancer patients also may have concurrent iron deficiency secondary to erythropoietin use ( functional iron deficiency) or to cancer. Therefore, it is imperative that these patients have iron studies done to assess adequate iron stores needed to drive hematopoiesis. If the patient is determined to have sub-optimal iron stores or is iron deficient, then replacement either orally or intravenously may be necessary, in addition to the use of erythropoietin products. The use of iron in these patients is the same as discussed previously under Iron-Deficiency Anemia. ... 

---