Primary ketones

Infrared studies of the carbonyl absorption of the copolymers as photolysis proceeds indicates the appearance of two new peaks and the loss of the original peak. The new absorption at 1725 cm can be explained by several processes. One is the change from a secondary ketone to a primary ketone as the type n reaction proceeds. A second explanation is the oxidation of free radical sites generated by type I. 

A detailed analytical study of fhe acfivity of some solid acid catalysts, including mesoporous silica-supported Nation, in the acylation of anisole with AAN allows the conclusion that catalyst deactivation is caused by the primary ketone product and/or multiple acetylated products in the micropores of Nation catalyst aggregates. i Experiments were performed with a commercially available silica-supported Nation catalyst in a continuous-mode slurry operation by using carbon-dioxide-expanded liquids (nitromethane or nitrobenzene) as solvents. At 90°C, 80% AAN conversion is observed with a TOS of 2 h, but the catalyst rapidly deactivates, and 27% conversion is evaluated after 6 h TOS with a TON value of about 400. The catalyst can, however, be completely regenerated upon nitric acid treatment. These results confirm that silica-supported Nation catalysts are promising alternatives for the traditional aluminum chloride homogeneous Lewis acid catalyst. 

The activity of the liquid phase polyhalogenated metalloporphyrins (Co, Mn, Fe) and supported catalysts (silica, polystyrene) and the cationic metalloporphyrins encapsulated in NaX zeolite are founded to be active for cyclooctane oxidation with molecular into ketone and alcohol with primary ketone formation. At the last case the ration c-one/c-ol is higher than at the use supported on silica and polystyrene catalysts and in fact coincide with results, which are received with the cationic metalloporphyrins in solution. [54]. 

Lead(fV) ethanoate, Pb(02CCH3)4, (Pb(ll)ethanoate plus CI2) is a powerful oxidizing agent which will convert vicinal glycols to aldehydes or ketones and 1,2-dicarboxylic acids into alkenes. Primary amides give ketones and amines give nitriles. 

Leuckart reaction The conversion of ketones and aromatic aldehyde,s to primary amines by reaction with ammonium methanoale at a high temperature. 

It will also reduce acid chlorides, acid anhydrides and aldehydes to primary alcohols, ketones to secondary alcohols, and amides to the corresponding amines R-CONHi -> R CHiNH. Nitro-hydrocarbons if aromatic are... 

Aldehydes and ketones may be converted into the corresponding primary amines by reduction of their oximes or hydrazones (p. 93). A method of more limited application, known as the Leuckart Reaction, consists of heating the carbonyl compound with ammonium formate, whereby the formyLamino derivative is formed, and can be readily hydrolysed by acids to the amine. Thus acetophenone gives the i-phenylethylformamide, which without isolation can be hydrolysed to i-phenylethylamine. 

The lower members of other homologous series of oxygen compounds— the acids, aldehydes, ketones, anhydrides, ethers and esters—have approximately the same limits of solubility as the alcohols and substitution and branching of the carbon chain has a similar influence. For the amines (primary, secondary and tertiary), the limit of solubility is about C whilst for the amides and nitriles it is about C4. 

The Dess-Martin periodinane ( DMP ) reagent, U,l-tris(acetyloxy)-l,l-dihydro-l,2-benziodoxol-3(l//)-one, has also been used in several complex syntheses for the oxidation of primary or secondary alcohols to aldehydes or ketones, respectively (e.g., M. Nakatsuka, 1990). It is prepared from 2-iodobenzoic add by oxidation with bromic add and acetylation (D.a Dess, 1983). 

The slow oxidation of primary alcohols, particularly MeOH, is utilized for the oxidation of allylic or secondary alcohols with allyl methyl carbonate without forming carbonates of the alcohols to be oxidized. Allyl methyl carbonate (564) forms 7r-allylpalladium methoxide, then exchange of the methoxide with a secondary or allylic alcohol 563 present in the reaction medium takes place to form the 7r-allylpalladium alkoxide 565, which undergoes elimination of j3-hydrogen to give the ketone or aldehyde 566. The lactol 567 was oxidized selectively with diallyl carbonate to the lactone 568 without attacking the secondary alcohol in the synthesis of echinosporin[360]. 

Simple ketones and esters are inert. On the other hand, nitroalkanes react smoothly in r-butyl alcohol as a solvent with butadiene, and their acidic hydrogens are displaced with the octadienyl group. From nitromethane, three products, 64, 65, and 66, are formed, accompanied by 3-substituted 1,7-octadiene as a minor product. Hydrogenation of 65 affords a fatty amine 67 which has a primary amino function at the center of the long linear chain[46,61]. 

Lithiated indoles can be alkylated with primary or allylic halides and they react with aldehydes and ketones by addition to give hydroxyalkyl derivatives. Table 10.1 gives some examples of such reactions. Entry 13 is an example of a reaction with ethylene oxide which introduces a 2-(2-hydroxyethyl) substituent. Entries 14 and 15 illustrate cases of addition to aromatic ketones in which dehydration occurs during the course of the reaction. It is likely that this process occurs through intramolecular transfer of the phenylsulfonyl group. 

These compounds are sources of the nucleophilic anion RC=C and their reaction with primary alkyl halides provides an effective synthesis of alkynes (Section 9 6) The nucleophilicity of acetylide anions is also evident m their reactions with aldehydes and ketones which are entirely analogous to those of Grignard and organolithium reagents... 

Alcohol synthesis via the reaction of Grignard reagents with carbonyl com pounds (Section 14 6) This is one of the most useful reactions in synthetic organ ic chemistry Grignard reagents react with formaldehyde to yield primary alco hols with aldehydes to give secondary alcohols and with ketones to form terti ary alcohols... 

The most obvious way to reduce an aldehyde or a ketone to an alcohol is by hydro genation of the carbon-oxygen double bond Like the hydrogenation of alkenes the reac tion IS exothermic but exceedingly slow m the absence of a catalyst Finely divided metals such as platinum palladium nickel and ruthenium are effective catalysts for the hydrogenation of aldehydes and ketones Aldehydes yield primary alcohols... 

Secondary alcohols are oxidized to ketones by the same reagents that oxidize primary alcohols... 

To the synthetic chemist the most important of the reactions m Table 17 1 are the last two the oxidation of primary alcohols to aldehydes and secondary alcohols to ketones Indeed when combined with reactions that yield alcohols the oxidation methods are so versatile that it will not be necessary to introduce any new methods for preparing aide hydes and ketones in this chapter A few examples will illustrate this point... 

Reduction to alcohols (Section 15 2) Aide hydes are reduced to primary alcohols and ketones are reduced to secondary alcohols by a variety of reducing agents Catalytic hydrogenation over a metal catalyst and reduction with sodium borohydride or lithium aluminum hydride are general methods... 

A number of compounds of the general type H2NZ react with aldehydes and ketones m a manner analogous to that of primary amines The carbonyl group (C=0) IS converted to C=NZ and a molecule of water is formed Table 17 4 presents exam pies of some of these reactions The mechanism by which each proceeds is similar to the nucleophilic addition-elimination mechanism described for the reaction of primary amines with aldehydes and ketones... 

In practice this reaction is difficult to carry out with simple aldehydes and ketones because aldol condensation competes with alkylation Furthermore it is not always possi ble to limit the reaction to the introduction of a single alkyl group The most successful alkylation procedures use p diketones as starting materials Because they are relatively acidic p diketones can be converted quantitatively to their enolate ions by weak bases and do not self condense Ideally the alkyl halide should be a methyl or primary alkyl halide... 

Primary amines undergo nucleo philic addition to the carbonyl group of aldehydes and ketones to form carbinol amines These carbinolamines dehydrate under the conditions of their formation to give N substituted imines Secondary amines yield enamines... 

Among compounds other than simple alkyl halides a halo ketones and a halo esters have been employed as substrates m the Gabriel synthesis Alkyl p toluenesul fonate esters have also been used Because phthalimide can undergo only a single alkyl ation the formation of secondary and tertiary amines does not occur and the Gabriel synthesis is a valuable procedure for the laboratory preparation of primary amines... 

A class of nitrogen containing compounds that was omitted from the section just dis cussed includes mines and their derivatives Immes are formed by the reaction of aide hydes and ketones with ammonia Immes can be reduced to primary amines by catalytic hydrogenation... 

Reaction of primary amines with aldehydes and ketones (Section... 

Imines are formed by nucleophilic addition of a primary amine to the carbonyl group of an al dehyde or a ketone The key step is formation of a carbinolamine intermedi ate which then dehy drates to the imine... 

With aldehydes, primary alcohols readily form acetals, RCH(OR )2. Acetone also forms acetals (often called ketals), (CH2)2C(OR)2, in an exothermic reaction, but the equiUbrium concentration is small at ambient temperature. However, the methyl acetal of acetone, 2,2-dimethoxypropane [77-76-9] was once made commercially by reaction with methanol at low temperature for use as a gasoline additive (5). Isopropenyl methyl ether [116-11-OJ, useful as a hydroxyl blocking agent in urethane and epoxy polymer chemistry (6), is obtained in good yield by thermal pyrolysis of 2,2-dimethoxypropane. With other primary, secondary, and tertiary alcohols, the equiUbrium is progressively less favorable to the formation of ketals, in that order. However, acetals of acetone with other primary and secondary alcohols, and of other ketones, can be made from 2,2-dimethoxypropane by transacetalation procedures (7,8). Because they hydroly2e extensively, ketals of primary and especially secondary alcohols are effective water scavengers. 

The primary and secondary alcohol functionahties have different reactivities, as exemplified by the slower reaction rate for secondary hydroxyls in the formation of esters from acids and alcohols (8). 1,2-Propylene glycol undergoes most of the typical alcohol reactions, such as reaction with a free acid, acyl hahde, or acid anhydride to form an ester reaction with alkaU metal hydroxide to form metal salts and reaction with aldehydes or ketones to form acetals and ketals (9,10). The most important commercial appHcation of propylene glycol is in the manufacture of polyesters by reaction with a dibasic or polybasic acid. 

---