Hydrogen potassium

Crystallizes from water in large colourless prisms containing 2H2O. It is poisonous, causing paralysis of the nervous system m.p. 101 C (hydrate), 189°C (anhydrous), sublimes 157°C. It occurs as the free acid in beet leaves, and as potassium hydrogen oxalate in wood sorrel and rhubarb. Commercially, oxalic acid is made from sodium methanoate. This is obtained from anhydrous NaOH with CO at 150-200°C and 7-10 atm. At lower pressure sodium oxalate formed from the sodium salt the acid is readily liberated by sulphuric acid. Oxalic acid is also obtained as a by-product in the manufacture of citric acid and by the oxidation of carbohydrates with nitric acid in presence of V2O5. 

CH2 CH CH0. a colourless, volatile liquid, with characteristic odour. The vapour is poisonous, and intensely irritating to eyes and nose b.p. 53"C. It is prepared by the distillation of a mixture of glycerin, potassium sulphate and potassium hydrogen sulphate. It is manufactured by direct oxidation of propene or cross-condensation of ethanal with meth-anal. 

CHjCOCOOH. A colourless liquid with an odour resembling that of ethanoic acid, m.p. 13 C, b.p. 65 C/lOmm. It is an intermediate in the breakdown of sugars to alcohol by yeast. Prepared by distilling tartaric acid with potassium hydrogen sulphate. Tends 10 polymerize to a solid (m.p. 92 C). Oxidized to oxalic acid or ethanoic acid. Reduced to ( + )-Iactic acid. 

Racemic acid, ( )-tartaric acid, is a compound of the two active forms. M.p. 273 C (with IHjO), m.p. 205°C (anhydrous). Less soluble in water than (-t-)-tartaric acid. Formed, together with mesotartaric acid, by boiling (4-)-tartaric acid with 30% NaOH solution, or by oxidation of fumaric acid. Potassium hydrogen racemate is very insoluble. 

Mesotartaric acid crystallizes in plates (IHjO), m.p. 140 C (anhydrous). Very soluble in water. Obtained from the mother-liquors in the preparation of racemic acid or by oxidation of maleic acid. Potassium hydrogen mesotartrale is soluble in water. 

Fluorine cannot be prepared directly by chemical methods. It is prepared in the laboratory and on an industrial scale by electrolysis. Two methods are employed (a) using fused potassium hydrogen-fluoride, KHFj, ill a cell heated electrically to 520-570 K or (b) using fused electrolyte, of composition KF HF = 1 2, in a cell at 340-370 K which can be electrically or steam heated. Moissan, who first isolated fluorine in 1886, used a method very similar to (b) and it is this process which is commonly used in the laboratory and on an industrial scale today. There have been many cell designs but the cell is usually made from steel, or a copper-nickel alloy ( Monel metal). Steel or copper cathodes and specially made amorphous carbon anodes (to minimise attack by fluorine) are used. Hydrogen is formed at the cathode and fluorine at the anode, and the hydrogen fluoride content of the fused electrolyte is maintained by passing in... 

The ability of the solid chlorates(V) to provide oxygen led to their use in matches and fireworks. Bromates(V) and iodates(V) are used in quantitative volumetric analysis. Potassium hydrogen diiodate(V), KHflOjlj, is used to standardise solutions of sodium thiosulphate(Vf) since in the presence of excess potassium iodide and acid, the reaction... 

Hydrolysis of Potassium Ethyl Sulphate. Dissolve about i g. of the crystals in about 4 ml. of cold distilled water, and divide the solution into two portions, a) To one portion, add barium chloride solution. If pure potassium ethyl sulphate were used, no precipitate should now form, as barium ethyl sulphate is soluble in water. Actually however, almost all samples of potassium ethyl sulphate contain traces of potassium hydrogen sulphate formed by slight hydrolysis of the ethyl compound during the evaporation of its solution, and barium chloride almost invariably gives a faint precipitate of barium sulphate. b) To the second portion, add 2-3 drops of concentrated hydrochloric acid, and boil the mixture gently for about one minute. Cool, add distilled water if necessary until the solution has its former volume, and then add barium chloride as before. A markedly heavier precipitate of barium sulphate separates. The hydrolysis of the potassium ethyl sulphate is hastened considerably by the presence of the free acid Caustic alkalis have a similar, but not quite so rapid an effect. 

Tartaric acid is noteworthy for a) the excellent way in which the majority of its salts Crystallise, and h) the frequent occurrence of salts having mixed cations. Examples of the latter are sodium potassium tartrate (or Rochelle salt), C4H40 NaK, used for the preparation of Fehling s solution (p. 525), sodium ammonium tartrate, C4H OaNaNH4, used by Pasteur for his early optical resolution experiments, and potassium antimonyl tartrate (or Tartar Emetic), C4H404K(Sb0). The latter is prepared by boiling a solution of potassium hydrogen tartrate (or cream of tartar ) with antimony trioxide,... 

Required Potassium hydrogen tartrate, 5 g. antimony trioxide, 5 g-... 

Add 5 g. of potassium hydrogen tartrate and 5 g. of antimony trioxide (each being finely powdered) to 30 ml. of water contained in a small flask, and boil the mixture under a reflux water-condenser for 15 minutes. Then filter hot, using a Buchner funnel and flask which have been preheated by the filtration of some boiling distilled water. Pour the clear filtrate into a beaker and allow to cool. Potassium antimonyl tartrate separates as colourless crystals. Filter, drain and dry. Yield, 5 g. The product can be recrystallised from hot water, but this is usually not necessary. 

SO, + 2H,0 + Br, — HjSO, + 2HBr Alternatively, the acid mixture may be obtained from the reaction between potassium bromide solution and concentrated sulphuric acid below 76° the potassium hydrogen sulphate crystallises out and is removed by filtration ... 

It may be pointed out that dehydration of p hydroxy esters with fused potassium hydrogen sulphate, acetic anhydride, phosphoric oxide or with tliionyl chloride in benzeue solution leads to ap unsiiturated esters containing some PY-unsaturated ester the proportion of the latter depends not only upon the structure of the ester but also upon the dehydrating agent used. Elehydration occasionally occurs during the reaction itself or upon attempted distillation. 

Sulfuric acid (H2SO4) and phosphoric acid (H3PO4) are the acids most frequently used m alcohol dehydrations Potassium hydrogen sulfate (KHSO4) is also often used... 

Lithium fluoride is the optimum crystal for all wavelengths less than 3 A. Pentaerythritol (PET) and potassium hydrogen phthalate (KAP) are usually the crystals of choice for wavelengths from 3 to 20 A. Two crystals suppress even-ordered reflections silicon (111) and calcium fluoride (111). 

Potassium hydrogen tartrate, about 0.034M Saturated at 25°C... 

To prepare the standard pH buffer solutions recommended by the National Bureau of Standards (U.S.), the indicated weights of the pure materials in Table 8.15 should be dissolved in water of specific conductivity not greater than 5 micromhos. The tartrate, phthalate, and phosphates can be dried for 2 h at 100°C before use. Potassium tetroxalate and calcium hydroxide need not be dried. Fresh-looking crystals of borax should be used. Before use, excess solid potassium hydrogen tartrate and calcium hydroxide must be removed. Buffer solutions pH 6 or above should be stored in plastic containers and should be protected from carbon doxide with soda-lime traps. The solutions should be replaced within 2 to 3 weeks, or sooner if formation of mold is noticed. A crystal of thymol may be added as a preservative. 

In this experiment the overall variance for the analysis of potassium hydrogen phthalate (KHP) in a mixture of KHP and sucrose is partitioned into that due to sampling and that due to the analytical method (an acid-base titration). By having individuals analyze samples with different % w/w KHP, the relationship between sampling error and concentration of analyte can be explored. 

KHC3H4O4 is also known as potassium hydrogen phthalate, or KHP. 

When standardizing a solution of NaOH against potassium hydrogen phthalate (KHP), a variety of systematic and random errors are possible. Identify, with justification, whether the following are systematic or random sources of error, or if they have no effect. If the error is systematic, then indicate whether the experimentally determined molarity for NaOH will be too high or too low. The standardization reaction is... 

Properties. Other names for potassium bifluoride are potassium hydrogen difluoride and potassium acid fluoride. This white crystalline salt is a soft, waxy soHd. The crystal forms of potassium bifluoride are tetragonal and cubic (21). The bifluoride ion in KHF2 averages 0.2292 nm between fluoride... 

---