Portland cement silicate

Mortars used in the past have primarily been composed of Portland cement, silicates, and litharge and glycerine. Except for Portland cement, these traditional materials have generally been replaced by resin mortars utilizing epoxy, polyester, vinyl ester and furan resins. 

SYNONYMS cement, hydraulic cement, portland cement silicate. 

Synonyms/Trade Names Cement, Hydraulic cement, Portland cement silicate [Note A class of hydraulic cements containing tri- and dicalcium silicate in addition to alumina, tricalcium aluminate, and iron oxide.]... 

PORTLAND CEMENT (LESS THAN % QUARTZ) Hydraulic cement, Cement, Portland cement silicate None hazardous Not combustible ... 

Many substances are known to act as accelerators for concrete. These include soluble inorganic chlorides, bromides, fluorides, carbonates, thiocyanates, nitrites, nitrates, thiosulfates, silicates, aliuninates, alkali hydroxides, and soluble organic compounds such as triethanolamine, calcium formate, calcium acetate, calcium propionate, and calcium butyrate. Some of them are used in combination with water reducers. Quick setting admixture s used in shotcrete applications and which promote setting in a few minutes may contain sodium silicate, sodium aluminate, aluminum chloride, sodium fluoride, strong alkalis, and calcium chloride. Others are solid admixtures such as calcium aluminate, seeds of finely divided Portland cement, silicate minerals, finely divided magnesium carbonate, and calcium carbonate. Of these, calcium chloride has been the most widely used because of its ready availability, low cost, predictable performance characteristics, and successful application over several decades.In some countries the use of calcium chloride is prohibited, in some others, such as Canada and the USA, the use of calcium chloride is permitted provided certain precautions are taken. Attempts have continued to find an effective alternative to calcium chloride because of some of the problems associated with its use. 

Portland cement A hydraulic cement made from CaC03 and aluminium silicates. 

The Shoe grouting system is considered nonhazardous and nonpolluting. Sodium silicate is essentially nontoxic. Formamide is toxic and corrosive, but does not present a serious hazard if normal safety precautions are followed. Shoe chemical grout materials are two to five times more expensive than Portland cement, depending on the sodium silicate to formamide concentration ratios. Installed costs are generally more similar to those for cement grouts. 

Calcium Silicates. Cements aie hydiated at elevated tempeiatuies foi the commercial manufacture of concrete products. Using low pressure steam curing or hydrothermal treatment above 100°C at pressures above atmospheric, the products formed from calcium siUcates are often the same as the hydrates formed from their oxide constituents. Hence lime and siUca ate ftequendy used in various proportions with or without Portland cement in the manufacture of calcium siUcate hydrate products. Some of these compounds are Hsted in Table 6. 

The important compounds in Portland cement are dicalcium silicate (CazSi04) 26%, tricalcium silicate (CasSiOj) 51%. tricalcium aluminate (Ca3Al206) 11% and the tetracalcium species Ca4Al2Fe2 Oio (1%). The principal constituent of moistened cement paste is a tobermorite gel which can be represented schematically by the following idealized equations ... 

The form of silica in the matrix is at present unknown. In the freshly prepared cement there are appreciable amounts of silicic acid present which decline as the cement ages (Crisp, Lewis Wilson, 1976d). In the set cement silica could be present as a polymeric silicic acid, a siliceous gel or even a hydrated silicate gel, such as the tobermorite gel present in Portland cements (Taylor, 1966). 

Special grades of gypsum hemihydrate are blended with Portland cement for types with reduced thickening time and setting time. Gypsum requires significantly more water addition. The maximal application temperatures are 70° to 80° C. Sodium silicate is used for cement slurries with diatomaceous earth. It can be used up to 7% by weight. 

Incomplete displacement of fluid from the annular space can result in gaps in the cement sheath through which fluids from different formations can intermingle. In this situation, a "squeeze cementing" treatment is required to plug these gaps. Portland cement or rapidly setting sodium silicate slurries can be used in this operation. 

Chemical hxation is another possible process to handle drilling fluids. A typical process uses a mixture of potassium or sodium silicate with portland cement to turn a drilling fluid into a soil-like solid that may be left in place, used as a landhll, or even used as a construction material [13]. 

Portland cement refers to a class of hydraulic cements in which the two essential constituents are tricalcium silicate (3Ca0-Si02) and dicalcium silicate (2Ca0-Si02) with varying amounts of alumina, tricalcium aluminate, and... 

When anhydrous cement mix is added to water, the silicates react, forming hydrates and calcium hydroxide. Hardened Portland cement contains about 70% cross-linked calcium silicate hydrate and 20% crystalline calcium hydroxide. 

The manufacture of Portland concrete consists of three basic steps—crushing, burning, and finish grinding. As noted earlier, Portland cement contains about 60% lime, 25% silicates, and 5% alumina with the remainder being iron oxides and gypsum. Most cement plants are located near limestone (CaCOs) quarries since this is the major source of lime. Lime may also come from oyster shells, chalk, and a type of clay called marl. The silicates and alumina are derived from clay, silicon sand, shale, and blast-furnace slag. 

Portland cement Major three-dimensional inorganic construction polymer containing calcium silicates, lime, and alumina. 

Addition of dampproofers based on caprylic, capric or stearic acids, stearates or wax emulsions do not have any effect on the setting characteristics of hydration products of Portland cement. However, the unsaturated fatty acid salts, such as oleates, although not affecting the tricalcium silicate hydration, have a marked effect on the ettringite and monosulfate reaction [12] and this is illustrated in the isothermal calorimetry results in Fig. 4.4. It is possible that a calcium oleoaluminate hydrate complex is formed involving the double bond of the oleic acid. 

Pozzolanic S/S systems use portland cement and pozzolan materials (e.g., fly ash) to produce a strucmrally stronger waste/concrete composite. The waste is contained in the concrete matrix by microencapsulation (physical entrapment). It is a chemical treatment that uses commercially available soluble silicate solutions and various cementious materials such as cement, lime, poz-zolans, and fly ash. By addition of these reagents and rigorous mixing, the waste is fixed or stabilized. Contaminant mobility is reduced through the binding of contaminants within a solid matrix, which reduces permeability and the amount of surface area available for the release of toxic components. 

---