Polyurethanes polyester block copolymers

Multiblock Copolymers. Replacement of conventional vulcanized mbber is the main appHcation for the polar polyurethane, polyester, and polyamide block copolymers. Like styrenic block copolymers, they can be molded or extmded using equipment designed for processing thermoplastics. Melt temperatures during processing are between 175 and 225°C, and predrying is requited scrap is reusable. They are mostiy used as essentially pure materials, although some work on blends with various thermoplastics such as plasticized and unplasticized PVC and also ABS and polycarbonate (14,18,67—69) has been reported. Plasticizers intended for use with PVC have also been blended with polyester block copolymers (67). 

Fig. 10. Internal energy changes as a function of deformation for oriented LDPE (I) and stress softened thermo-elastoplastic polyurethanes with 50% (2) and 42 % (3) hard phase content and polyether-polyester block copolymer with 48% hard phase content (4). The dotted curves 1 and 2 represent intramolecular energy changes for the corresponding polymers119 ...

S—EB—S (compounds) polyurethane/elastomer block copolymers polyester/elastomer block copolymers polyamide/elastomer block copolymers polyetherimide/polysiloxane block copolymers polypropylene/EPDM or EPR blends polypropylene/EPDM dynamic vulcanizates polypropylene/butyl rubber dynamic vulcanizates polypropylene/natural rubber dynamic vulcanizates polypropylene/nitrile rubber dynamic vulcanizates PVC/ nitrile rubber blends... 

This prepolymer (Scheme 1.10) is then reacted with a chain-extender diol or diamine to give the final polyurethane or polyurethane-polyurea block copolymer, respectively. The diversity in properties that the final urethane block copolymers exhibit is governed by the nature of the three building blocks the diol-terminated polyester, the di-isocyanate-terminated polyurethane and the chain extender (Hepburn, 1982). As shown in Figure 1.17, these form flexible blocks (from the polyester) that undergo phase segregation as structures of size 1000-2000 nm. 

Polyurethanes are block copolymers containing blocks of low molecular weight polyesters or polyethers linked together by a urethane group ... 

How can polyurethane-polyamide and polyamide-polyester block copolymers be formed Explain and show chemical reactions. 

Polyurethanes are block copolymers containing blocks of low molecular weight polyethers or polyesters linked together by a urethane group. The variety of linkages in polymers results from the further reaction of urethane groups with isocyanates and of isocyanates with amines, water, or carboxylic acids. 

Besides the thermoplastic elastomers based on poly(styrene-6-elastomer- -styrene) block copolymers, five others are of commercial importance polyurethane/elastomer block copolymers, polyester/elastomer block copolymers, polyamide/elastomer block copolymers, polyolefin block copolymers, and polyetherimide/polysiloxane block copolymers. All five have the multiblock A-B-A-B. structure. The morphology of the polyurethane, polyester,... 

Multiblock Copolymers Polyurethane/elastomer block copolymers Polyester/elastomer block copolymers Polyamide/elastomer block copolymers Polyethylene/poly(a-olefin) block copolymers... 

Global consumption of thermoplastic mbbers of all types is estimated at about 600,000 t/yr (51). Of this, 42% was estimated to be consumed in the United States, 39% in Western Europe, and 19% in Japan. At present, the woddwide market is estimated to be divided as follows styrenic block copolymers, 48% hard polymer/elastomer combinations, 26% thermoplastic polyurethanes, 12% thermoplastic polyesters, 4% and others, 9%. The three largest end uses were transportation, 23% footwear, 18% and adhesives, coatings, etc, 16%. The ranges of the hardness values, prices, and specific gravities of commercially available materials are given in Table 4. 

Block copolymers can contain crystalline or amorphous hard blocks. Examples of crystalline block copolymers are polyurethanes (e.g. B.F. Goodrich s Estane line), polyether esters (e.g. Dupont s Hytrel polymers), polyether amides (e.g. Atofina s Pebax grades). Polyurethanes have enjoyed limited utility due to their relatively low thermal stability use temperatures must be kept below 275°F, due to the reversibility of the urethane linkage. Recently, polyurethanes with stability at 350°F for nearly 100 h have been claimed [2]. Polyether esters and polyether amides have been explored for PSA applications where their heat and plasticizer resistance is a benefit [3]. However, the high price of these materials and their multiblock architecture have limited their use. All of these crystalline block copolymers consist of multiblocks with relatively short, amorphous, polyether or polyester mid-blocks. Consequently they can not be diluted as extensively with tackifiers and diluents as styrenic triblock copolymers. Thereby it is more difficult to obtain strong, yet soft adhesives — the primary goals of adding rubber to hot melts. 

At present there are five types of thermoplastic rubber (TPR). Three of these, the polyurethane, the styrenic and the polyester are termed segmented block copolymers in that they consist of thermoplastic molecules grafted to the rubbery molecules. At room temperature it is the thermoplastic molecules which clump together to anchor the rubbery molecules. When heat is applied the thermoplastic molecules are capable of movement so that the material may be shaped using conventional thermoplastic moulding equipment. 

Short fiber reinforcement of TPEs has recently opened up a new era in the field of polymer technology. Vajrasthira et al. [22] studied the fiber-matrix interactions in short aramid fiber-reinforced thermoplastic polyurethane (TPU) composites. Campbell and Goettler [23] reported the reinforcement of TPE matrix by Santoweb fibers, whereas Akhtar et al. [24] reported the reinforcement of a TPE matrix by short silk fiber. The reinforcement of thermoplastic co-polyester and TPU by short aramid fiber was reported by Watson and Prances [25]. Roy and coworkers [26-28] studied the rheological, hysteresis, mechanical, and dynamic mechanical behavior of short carbon fiber-filled styrene-isoprene-styrene (SIS) block copolymers and TPEs derived from NR and high-density polyethylene (HOPE) blends. 

Thermoplastic elastomeric behavior requires that the block copolymer develop a microheterogeneous two-phase network morphology. Theory predicts that microphase separation will occur at shorter block lengths as the polarity difference between the A and B blocks increases. This prediction is borne out as the block lengths required for the polyether-polyurethane, polyester-polyurethane, and polyether-polyester multiblock copolymers to exhibit thermoplastic elastomeric behavior are considerably shorter than for the styrene-diene-styrene triblock copolymers. 

The nature of the hard domains differs for the various block copolymers. The amorphous polystyrene blocks in the ABA block copolymers are hard because the glass transition temperature (100°C) is considerably above ambient temperature, i.e., the polystyrene blocks are in the glassy state. However, there is some controversy about the nature of the hard domains in the various multiblock copolymers. The polyurethane blocks in the polyester-polyurethane and polyether-polyurethane copolymers have a glass transition temperature above ambient temperature but also derive their hard behavior from hydrogen-bonding and low levels of crystallinity. The aromatic polyester (usually terephthalate) blocks in the polyether-polyester multiblock copolymer appear to derive their hardness entirely from crystallinity. 

Elastollan Polyurethane block copolymer with polyether/polyester BASF... 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

PS PSF PSU PTFE PU PUR PVA PVAL PVB PVC PVCA PVDA PVDC PVDF PVF PVOH SAN SB SBC SBR SMA SMC TA TDI TEFE TPA UF ULDPE UP UR VLDPE ZNC Polystyrene Polysulfone (also PSU) Polysulfone (also PSF) Polytetrafluoroethylene Polyurethane Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) poly(vinyl butyrate) Poly(vinyl chloride) Poly(vinyl chloride-acetate) Poly(vinylidene acetate) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl fluoride) Poly(vinyl alcohol) Styrene-acrylonitrile copolymer Styrene-butadiene copolymer Styrene block copolymer Styrene butadiene rubber Styrene-maleic anhydride (also SMC) Styrene-maleic anhydride (also SMA) Terephthalic acid (also TPA) Toluene diisocyanate Ethylene-tetrafluoroethylene copolymer Terephthalic acid (also TA) Urea formaldehyde Ultralow-density polyethylene Unsaturated polyester resin Urethane Very low-density polyethylene Ziegler-Natta catalyst... 

---