Polymers, chemical modification solvent

Chemical modifications of PPO by electrophilic substitution of the aromatic backbone provided a variety of new structures with improved gas permeation characteristics. It was found that the substitution degree, main chain rigidity, the bulkiness and flexibility of the side chains and the polarity of the side chains are major parameters controlling the gas permeation properties of the polymer membrane. The broad range of solvents available for the modified structures enhances the possibility of facile preparation of PPO based membrane systems for use in gas separations. 

The in situ bulk polymerization of vinyl monomers in PET and the graft polymerization of vinyl monomers to PET are potential useful tools for the chemical modification of this polymer. The distinction between in situ polymerization and graft polymerization is a relatively minor one, and from a practical point of view may be of no significance. In graft polymerization, the newly formed polymer is covalently bonded to a site on the host polymer (PET), while the in situ bulk polymerization of a vinyl monomer results in a polymer that is physically entraped in the PET. The vinyl polymerization in the PET is usually carried out in the presence of the swelling solvent, thereby maintaining the swollen PET structure during polymerization. The swollen structure allows the monomer to diffuse in sufficient quantities to react at the active centers that have been produced by chemical initiation (with AIBM) before termination takes place. 

The improvement of its activity and stability has been approach by the use of GE tools (see Refs. [398] and [399], respectively). A process drawback is the fact that the oxidation of hydrophobic compounds in an organic solvent becomes limited by substrate partition between the active site of the enzyme and the bulk solvent [398], To provide the biocatalyst soluble with a hydrophobic active site access, keeping its solubility in organic solvents, a double chemical modification on horse heart cytochrome c has been performed [400,401], First, to increase the active-site hydrophobicity, a methyl esterification on the heme propionates was performed. Then, polyethylene glycol (PEG) was used for a surface modification of the protein, yielding a protein-polymer conjugates that are soluble in organic solvents. 

If the surface of a metal or carbon electrode is covered with a layer of some functional material, the electrode often shows characteristics that are completely different from those of the bare electrode. Electrodes of this sort are generally called modified electrodes [9] and various types have been developed. Some have a mono-molecular layer that is prepared by chemical bonding (chemical modification). Some have a polymer coat that is prepared either by dipping the bare electrode in a solution of the polymer, by evaporating the solvent (ethanol, acetone, etc.) of the polymer solution placed on the electrode surface, or by electrolytic polymerization of the monomer in solution. The polymers of the polymer-modified electrodes are either conducting polymers, redox polymers, or ion-exchange polymers, and can perform various functions. The applications of modified electrodes are really limit-... 

PLASTICIZERS. High-boiling solvents or softening agents, usually liquid, added to a polymer to facilitate processing or to increase flexibility or toughness, (Where these effects are achieved by chemical modification of die polymer molecule, e.g., through copolymerizadon, the resin is said to be internally plasticized. )... 

Chemical modification of electrode surfaces by polymer films offers the advantages of inherent chemical and physical stability, incorporation of large numbers of electroactive sites, and relatively facile electron transport across the film. Since th% polymer films usually contain the equivalent of one to more than 10 monolayers of electroactive sites, the resulting electrochemical responses are generally larger and thus more easily observed than those of immobilized monomolecular layers. Also, the concentration of sites in the film can be as high as 5 mol/L and may influence the reactivity of the sites because their solvent and ionic environments differ considerably from dilute homogeneous solutions [9]. 

Sulfonation is very useful chemical modification of polymer, as it induces high polarity in the polymer changing its chemical as well as physical properties. Sulfonated polymers are also important precursors for ionomer formation [75]. There are reports of sulfonation of ethylene-propylene diene terpolymer (EPDM) [76, 77], polyarylene-ether-sulfone [78], polyaromatic ether ketone [79], polyether ether ketone (PEEK) [80], styrene-ethylene-butylene-styrene block copolymer, (SEBS) [81]. Poly [bis(3-methyl phenoxy) phosphozene] [82], Sulfonated polymers show a distinct peak at 1176 cm"1 due to stretching vibration of 0=S=0 in the -S03H group. Another peak appears at 881 cm 1 due to stretching vibration of S-OH bond. However, the position of different vibrational bands due to sulfonation depends on the nature of the cations as well as types of solvents [75, 76]. 

Attenuated total reflectance infrared spectroscopy was employed to determine the possible chemical modification of the PVC specimen exposed to t-butyl alcohol and methyl t-butyl ether. Infrared spectroscopy has been used to study solvent absorption (17), oxidation (18) and other degradation reactions of polymers (19). In the studies of the hostile effects of methyl t-butyl ether and acetone, the solvent was concentrated and examined using conventional infrared techniques. 

---