Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polyethylene-grafted maleic anhydride

Sanchez-Valdes, S., Picazo-Rada, C.J., and Lopez-Quiuintanilla, M.L. 2001. Polyethylene grafted maleic anhydride to improve wettabdity of liquid on polyethylene films. J Appl Polym Sci. 79 1802-1808. [Pg.301]

A.W.M. Kahar, H. Ismail, N. Othman. Effects of polyethylene-grafted maleic anhydride as a compatibilizer on the morphology and tensile properties of (thermoplastic tapioca starch)/ (high-density polyethylene)/(natural rubber) blends... [Pg.153]

J.M. (Juiroz-Castillo, D.E. Rodriguez-Felix, H. Grijalva-Monteverde, T. del Castillo-Castro, M. Plascencia-Jatomea, F. Rodriguez-Felix, P.J. Heriera-Franco, Preparation of extruded polyethylene/chitosan blends compatibilized with polyethylene-graft-maleic anhydride. Caibohydr. Polym. 101, 1094-1100 (2014)... [Pg.154]

T. Del Castillo-Castro, M.M. CastiUo-Ortega, P.J. Herrera-Franco, D.E. Rodriguez-Felix, Compatibilization of polyethylene/polyaniline blends with polyethylene-graft-maleic anhydride. J. Appl. Polym. Sci. 119, 2895-2901 (2011)... [Pg.155]

PE-g-MA Polyethylene grafted maleic anhydride PE-g-MB Polyethylene grafted (2-methyl-l,3-butadiene)... [Pg.1910]

N. Dayma, B.K. Satapathy, Micro structural correlations to micromechanical properties of polyamide-6/low density polyethylene-grafted-maleic anhydride/nanoclay ternary nanocomposites, Materials and Design 33 (1) (2012) 510-522. [Pg.48]

Azizi S, Yunus WMZW, Ahmad M (2011) Effect of polyethylene-grafted maleic anhydride on properties of high-density polyethylene and polystyrene blend/layered silicate nanocomposites. J Reinf Plast Comp 30 1649-1654... [Pg.577]

In one study, rPP and recycled polyethylene (rPE) were blended with two compatibilisers, polyethylene-grafted-maleic anhydride (PE-g-MA) and ethylene propylene diene monomer (EPDM) copolymer, and OMMT [56]. Scanning electron microscopy (SEM) micrographs showed that the blend with EPDM exhibited a better compatibilisation than PE-g-MA. The presence of OMMT caused an increase of the storage modulus and loss modulus additionally, OMMT improved the thermal stability. [Pg.36]

Liu W, Wang Y J, Sun Z (2003), Effects of polyethylene-grafted maleic anhydride (PE-g-MA) on thermal properties, morphology, and tensile properties of low-density polyethylene (LDPE) and com starch blends , J. Appl. Polym. Sci., 83(13), 2904-2911. [Pg.284]

A linear low density polyethylene (LLDPE, Sclair FP120-A) with a melt index of 1.0 g/lOmin was provided by Nova Chemicals. The selected compatibilizing agent was a linear low density polyethylene grafted maleic anhydride supplied by Arkema (LLDPE-g-MAH, Orevac 18302N), with a melt index of 1.4g/10min and a maleic anhydride content of 0.5-1.0%wt. Uncompatibilized blends of LLDPE/organoclay (composition 98/2 %wt.)... [Pg.504]

Tables 2 and 3 give the results of haze reduction for the polymeric red and polymeric yellow dye, respectively, based on the type of analysis described for Figure 2. Haze reductions in both the red and yellow polymeric dye were observed with the addition of both polyethylene-based Zn ionomer and polypropylene-alt-maleic anhydride copolymer. The polypropylene-graft-maleic anhydride copolymers were not effective in reducing haze in the polymeric red, but did show haze reduction in the yellow, although relatively higher loadings of this wax were necessary to give similar results to the Zn ionomer or the PP-alt-MA materials. The polyethylene-graft-maleic anhydride copolymer, the succinic anhydride- terminated isotactic PP, and the PP homopolymer wax did not reduce haze with the polymeric red. The C30 a-olefin-alt-maleic anhydride copolymer and the polyethylene-based calcium ionomer both produced increases in haze when molded with the polymeric red. Tables 2 and 3 give the results of haze reduction for the polymeric red and polymeric yellow dye, respectively, based on the type of analysis described for Figure 2. Haze reductions in both the red and yellow polymeric dye were observed with the addition of both polyethylene-based Zn ionomer and polypropylene-alt-maleic anhydride copolymer. The polypropylene-graft-maleic anhydride copolymers were not effective in reducing haze in the polymeric red, but did show haze reduction in the yellow, although relatively higher loadings of this wax were necessary to give similar results to the Zn ionomer or the PP-alt-MA materials. The polyethylene-graft-maleic anhydride copolymer, the succinic anhydride- terminated isotactic PP, and the PP homopolymer wax did not reduce haze with the polymeric red. The C30 a-olefin-alt-maleic anhydride copolymer and the polyethylene-based calcium ionomer both produced increases in haze when molded with the polymeric red.
Figure 6.1.14. Pyrogram of poly(ethylene-graft-maleic anhydride) 3% wt. maleic anhydride (upper trace), and of high-density polyethylene (lower trace). Pyrolysis done on 0.4 mg material at 60(f C in He, with the separation on a Carbowax type column. Figure 6.1.14. Pyrogram of poly(ethylene-graft-maleic anhydride) 3% wt. maleic anhydride (upper trace), and of high-density polyethylene (lower trace). Pyrolysis done on 0.4 mg material at 60(f C in He, with the separation on a Carbowax type column.
Wood flour from maple, 120 mesh, vacuum dried. The coupling agent was maleated polyethylene containing 1% (w/w) grafted maleic anhydride (Epolene G-2608, Eastman Chemicals). The lubricant was alkene bis fatty amid (Glycolube WP-2002, Lonza Inc.) [4]. [Pg.637]

Graft-functionalization of polyolefin in a separate processing step e.g., polyethylene-g-maleic anhydride, polypropylene-g-maleic anhydride). [Pg.357]

The crosslinking of polyethylene resulting from its reaction with peroxides is more profound if maleic anhydride is present in the system [113]. The crosslinked fraction contains a higher proportion of carbonyl groups from grafted maleic anhydride than... [Pg.176]

Maleic anhydride-modified polyethylene (Fusabond 226D, base resin type LLDPE, grafted maleic anhydride 0.90 wt%, MFR 1.5g/10min ASTM D1238 (190 °C, 2.16 kg) MA-g-PE) supplied by E. I. DuPont... [Pg.180]

Samay, G., Nagy, T., and White, J. L. 1995. Grafting maleic anhydride and comonomers onto polyethylene. Journal of Applied Polymer Science 56 1423-1433. [Pg.117]

As most of the grafting now has to be achieved in an indirect way, the residence time can become a limiting factor. However, this mechanism also leads to the formation of many polyethylene and maleic anhydride radicals, thereby increasing the probability of grafting with an increasing maleic anhydride concentration. This effect is even enhanced because at high maleic anhydride concentrations phase separation between maleic anhydride and polyethylene can occur (6). [Pg.176]

Materials studied include polyesters and polyethers [73], PMMA [74], star-shaped styrene block copolymers [75, 76], PC [77], isoprene-styrene graft copolymers [76], polyethylene oxide-maleic anhydride-vinyl methyl ether copolymers [78], polybutylene terephthalate [79], PE [80], (phenoxymethyl)thizrane [81], polytrimethylene carbonate [82], polybutylene succinate [83], polymethyldiundecenylsilane [84], poly(N-vinyl carbazole) [85], titanium-containing copolymers [86], styrene-macro zwitterion polymers [87], and poly(octadecene-alt-maleic anhydride) [88]. [Pg.273]

Table 9.2. Parameters of the Burgers model fitting the creep behavior of polyethylene -montmorillonite layered silicate (MLS) rianocomposites compatibilized with PE grafted maleic anhydride. Short-term creep tests were performed up to 3 600 s at an applied stress of 50% of the yield stress [21]... Table 9.2. Parameters of the Burgers model fitting the creep behavior of polyethylene -montmorillonite layered silicate (MLS) rianocomposites compatibilized with PE grafted maleic anhydride. Short-term creep tests were performed up to 3 600 s at an applied stress of 50% of the yield stress [21]...
See other pages where Polyethylene-grafted maleic anhydride is mentioned: [Pg.154]    [Pg.841]    [Pg.26]    [Pg.448]    [Pg.265]    [Pg.143]    [Pg.406]    [Pg.48]    [Pg.404]    [Pg.154]    [Pg.841]    [Pg.26]    [Pg.448]    [Pg.265]    [Pg.143]    [Pg.406]    [Pg.48]    [Pg.404]    [Pg.148]    [Pg.148]    [Pg.394]    [Pg.31]    [Pg.240]    [Pg.97]    [Pg.1173]    [Pg.473]    [Pg.268]    [Pg.384]    [Pg.1516]    [Pg.393]    [Pg.22]    [Pg.47]    [Pg.168]    [Pg.616]    [Pg.379]   
See also in sourсe #XX -- [ Pg.36 , Pg.37 ]



SEARCH



Anhydrides maleic anhydride

Maleic anhydride

Maleic anhydride grafted

Maleic anhydride polyethylene

Maleic grafted

Polyethylene grafted

Polyethylene grafting

Polyethylene-grafted maleic anhydride PE-g-MA)

© 2024 chempedia.info