Poly propionates

Scheme 6.9. Corstructior of the poly-propionate segment of Rifamycin S through iterative diastereoselective cuprate addition to acyclic enoates. a) Me2Cu Li, TMSCI,...

The above enzymatic reductions allowed a highly stereoselective access to poly-propionate-like building blocks or polyketide-derived natural products. 

Manker, D.C., Faulkner, D.J., Stout, T.J., and Clardy J. (1989) The baconipyrones novel poly-propionates from the puhnonate Siphonaria baconi. J. Org. Chem., 54, 5371-5374. 

Fig. 19. Permeation of ethyl propionate at various concentrations through poly(vinyl alcohol) at 25°C, 0% rh. Percentages on x-axis represent partial...

Of the higher vinyl ester homopolymers only poly(vinyl propionate) is currently believed to be of commercial value, being marketed as Propiofan (BASF) for surface coating application where greater alkali resistance is possible than with the normal vinyl acetate based copolymers. 

Chang, R. K., Price, J. C., and Whitworth, C. W., Control of drug release rates through the use of mixtures of poly-caprolactone and cellulose propionate polymers, Pharm. Technol. 10, 24, 26, 29, 32-33, 1986. 

The successful use of crop plants as a production method for biopolymer not only depends on the amount of PHA accumulated in plants but also on the type and quality of the PHA synthesized. Since poly(3HB) is a polymer with poor physical characteristics [16], it was important to engineer plants for the synthesis of PHA co-polymers with better physical characteristics. Poly(3-hydroxybu-tyrate-co-3-hydroxyvalerate) [poly(3HB-co-3HV)] is the best studied co-poly-mer. Poly(3HB-co-3HV) has lower crystallinity, and is more flexible and less brittle than poly(3HB) homopolymer [16]. Synthesis of poly(3HB-co-3HV) in bacteria was first achieved by fermentation of R. eutropha on glucose and propionic acid [2]. For a number of years, production of poly(3HB-co-3HV),... 

Production of poly(3HB-co-3HV) co-polymer in plants has recently been demonstrated by the PHA group of Monsanto [27], which acquired the PHA business of Zeneca in 1996. In the commercial production of poly(3HB-co-3HV) from R. eutropha, propionate is added to the growth media in order to create an intracellular pool of propionyl-CoA which can be condensed to acetyl-CoA to form 3-ketovaleryl-CoA. The 3-ketovaleryl-CoA is then reduced by the aceto-acetyl-CoA reductase to give 3-hydroxyvaleryl-CoA, which is co-polymerized with 3-hydroxybutyryl-CoA to synthesize poly(3HB-co-3HV) (Fig. 1). For the synthesis of poly(3HB-co-3HV) in plants, it was thus necessary to create an endogenous pool of propionyl-CoA which could be used by the PHA pathway. 

Miktoarm stars of the A(BC)2 type, where A is PS, B is poly(f-bulyl acrylate) (PtBA), and C is PMMA [161] have been synthesized, by using the trifunctional initiator 2-phenyl-2-[(2,2,6,6-tetramethyl)-l-piperidinyloxy] ethyl 2,2-bis[methyl(2-bromopropionato)] propionate (NMP, ATRP) (Scheme 86). In the first step, a PS macroinitiator with dual < -bromo functionality was obtained by NMP of styrene in bulk at 125 °C. This precursor was subsequently used as the macroinitiator for the ATRP of ferf-bulyl acry-... 

Liu et al. prepared palladium nanoparticles in water-dispersible poly(acrylic acid) (PAA)-lined channels of diblock copolymer microspheres [47]. The diblock microspheres (mean diameter 0.5 pm) were prepared using an oil-in-water emulsion process. The diblock used was poly(t-butylacrylate)-Wock-poly(2-cinna-moyloxyethyl) methacrylate (PtBA-b-PCEMA). Synthesis of the nanoparticles inside the PAA-lined channels of the microspheres was achieved using hydrazine for the reduction of PdCl2, and the nanoparticle formation was confirmed from TEM analysis and electron diffraction study (Fig. 9.1). The Pd-loaded microspheres catalyzed the hydrogenation of methylacrylate to methyl-propionate. The catalytic reactions were carried out in methanol as solvent under dihydro-... 

Emulsion paints are based on aqueous synthetic resin dispersions, which afford a lacquer-like paint film. The resin dispersions which are commonly used by the paint industry contain water as the carrier phase. A large number of such dispersions are available, based on different resins such as poly(vinyl acetate), which may be employed as a copolymer with vinyl chloride, maleic dibutyl ester, ethylene, acrylic acid esters, polyacrylic resin, and copolymers of the latter with various monomers, as well as styrene-butadiene or poly(vinyl propionate). These disper-... 

Torchilin et al. synthesized an iodine-containing amphiphilic block-copolymer consisting of iodine-substituted poly-L-lysine which is able to form micelles in aqueous solution [37]. The two components of the block-copolymer were methoxy-poly(ethylene glycol) propionic acid (MPEG-PA) with a molecular weight of 12 kDa and poly[ ,M-(2,3,5-triiodobenzoyl)]-L-lysine. The particle size of the micelles was approx. 80 nm, and the iodine concentration was 20 mg mL . Biodistribution studies in rats showed significant and prolonged enhancement of the aorta, the liver and spleen. 

At the end of the polymerization reaction, octadecyl 3-(3,5-di-ferf-butyl-4-hydroxyl)propionate, and in addition 2,5-di-ferf-but-yl-p-cresol are added as antioxidants in order to protect the product during solvent elimination, drying and storage. Morphologies, such as rods, points or capsules can be obtained by tailoring the polydispersity of the poly(styrene) block (10). 

The intrinsic viscosity of poly(L-proline) is studied as a function of molecular weight and temperature In five commonly used solvents water, trifluoroethanol, acetic acid, propionic acid, and benzyl alcohol. The characteristic ratio is 14 in water and 18-20 in the organic solvents at 303 K, and d (in 0) / d T is negative. The theoretical rotational potential function obtained by Hopfinger and Walton for u-prolyl-L-prolyl-t-prolyl-t-proline J. Macromol. Scl. Phys. 1969, 3, 171 correctly predicts the characteristic ratio at 303 K but predicts the wrong sign for tfiln < >0) IdT. 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

---