Poly , Alkali Metal

Di- and Poly alkali Metal Derivatives of Heterofunctionally Substituted Organic Molecules ... 

E. M. Kaiser, J. D. Petty, and P. L. A. Knutson, Di- and Poly-alkali Metal Derivatives of Heterofunctionally Substituted Organic Molecules , Synthesis, 1977, 509. 

An exhaustive review on di- and poly-alkali-metal derivatives of heterofunc-tionally substituted organic molecules contains many useful references on aromatic ring metallation, particularly of nitrogen- and sulphur-containing heteroaromatics. Other reviews include a description of the use of chromium tricarbonyl-arene complexes in organic synthesis and the preparation and use in synthesis of highly reactive metal powders. ... 

The catalysts most often described in the literature (209—211,252) are sodium or potassium hydroxide, methoxide, or ethoxide. The reported ratio of alkali metal hydroxides or metal alcoholates to that of poly(vinyl acetate) needed for conversion ranges from 0.2 to 4.0 wt % (211). Acid catalysts ate normally strong mineral acids such as sulfuric or hydrochloric acid (252—254). Acid-cataly2ed hydrolysis is much slower than that of the alkaline-cataly2ed hydrolysis, a fact that has limited the commercial use of these catalysts. 

Pyrazoles, and some indazoles, substituted on the nitrogen by B, Al, Ga, In, Si, Ge, Sn, P and Hg are known. Poly(pyrazol-1 -yl)borates have been studied by Trofimenko (72CRV497) who found that they were excellent ligands (Section 4.04.2.1.3(vi)). The parent ligands (282), (283) and (284) are available by the reaction of an alkali metal borohydride with pyrazole, the extent of substitution depending on the reaction temperature (Scheme 22). 

The one-pot synthesis of 9 described above appears to afford only modest yields of azacrowns. One might wonder why any crown at all would be formed under non-high dilution conditions intended to yield only open-chained material. Vogtle suggests that this can be explained in terms of template, steric and entropy effects . These factors are of doubtless significance, but it is interesting to note that in the synthesis of poly-azamacrocycles, Richman and Atkins found that there was no significant template effect observed. The question of the template effect in Ihe syntheses of 9 has recently been addressed by Kulstad and Malmsten They conclude that the formation of 9 is assisted by the presence of alkali metal cations. 

Although the sulfone activated biphenyl and the ketone activated naphthalene moiety for the displacement polymerization have been reported by Attwood et al. [11], these were rediscovered by Cummings et al. [12] and Hergenrother et al. [13], respectively, for the synthesis of poly(aryl ethers). Recently, Singh and Hay [14] reported polymers containing 0-dibenzoyl benzene (1,2,3) moiety by reaction between bis(O-fluorobenzoyl) benzene or substituted benzene with bisphenates of alkali metal salt in DMAC as follows ... 

Poly (macrocyclic) compounds. The analytical application of compounds such as crown polyethers and cryptands is based on their ability to function as ligands and form stable stoichiometric complexes with certain cations. Special importance is due to their preference for alkali metal ions which do not form complexes with many other ligands. A number of these compounds are commercially available and their properties and analytical applications have been described by Cheng et a/.11... 

Acid anhydride-diol reaction, 65 Acid anhydride-epoxy reaction, 85 Acid binders, 155, 157 Acid catalysis, of PET, 548-549 Acid-catalyzed hydrolysis of nylon-6, 567-568 of nylon-6,6, 568 Acid chloride, poly(p-benzamide) synthesis from, 188-189 Acid chloride-alcohol reaction, 75-77 Acid chloride-alkali metal diphenol salt interfacial reactions, 77 Acid chloride polymerization, of polyamides, 155-157 Acid chloride-terminated polyesters, reaction with hydroxy-terminated polyethers, 89 Acid-etch tests, 245 Acid number, 94 Acidolysis, 74 of nylon-6,6, 568... 

Thermally reversible gels can be prepared from poly (vinyl alcohol) and alkali metal salts of o-hydroxybenzal derivatives having benzenoid groups at both ends 24). Colored gels can be obtained, depending on the type of ketone used (Figure 4). 

Our requirements for certain applications called for the preparation of block copolymers of styrene and alkali metal methacrylates with molecular weights of about 20,000 and methacrylate contents of about 10 mol%. In this report we describe the preparation and reactions of S-b-MM and S-b-tBM. In the course of our investigation, we have found several new methods for the conversion of alkyl methacrylate blocks into methacrylic acid and/or metal methacrylate blocks. Of particular interest is the reaction with trimethylsilyl iodide. Under the same mild conditions, MM blocks are completely unreactive, while tBM blocks are cleanly converted to either methacrylic acid or metal methacrylate blocks. As a consequence of this unexpected selectivity, we also report the preparation of the new block copolymers, poly(methyl methacrylate-b-potassium methacrylate) (MM-b-MA.K) and poly(methyl methacrvlate-b-methacrylic acid) (MM-b-MA). 

Alternatively, esterification of carboxylic acid can be carried out in aqueous media by reacting carboxylic acid salts with alkyl halides through nucleophilic substitutions (Eq. 9.10).20 The reaction rate of alkyl halides with alkali metal salts of carboxylic acids to give esters increases with the increasing concentration of catalyst, halide, and solvent polarity and is reduced by water. Various thymyl ethers and esters can be synthesized by the reactions of thymol with alkyl halides and acid chlorides, respectively, in aqueous medium under microwave irradiation (Eq. 9.11).21 Such an esterification reaction of poly(methacrylic acid) can be performed readily with alkyl halides using DBU in aqueous solutions, although the rate of the reaction decreases with increasing water content.22... 

During the time of the Olin reports, the first examples of oligomeric boron-bridged (l-pyrazolyl)borate systems appeared from the laboratory of Trofimenko at DuPont Chemicals 24 He reported the synthesis of poly(l-pyrazolyl)borates (6) (Fig. 5) from the reactions of alkali metal borohydrides with the pyrazole ligand. The (l-pyrazolyl)borate ligand was obtained from two pyrazole units when bridged by a BR2 unit on one side and by a metal or onium ion on the other. Even though reports... 

Polymeric pseudocrown ether networks have been generated in situ by the photopolymerization of poly(ethylene glycol) diacrylate transition metal complexes <00CM633>, and the effect of metal ion templation was evaluated. The 1,6,13,18-tetraoxa[6.6]paracyclophane-3,15-diyne (termed pyxophanes) was prepared from hydroquinone and l,4-dichlorobut-2-yne it forms size-selective 7i-complexes with alkali metal cations <00CC2377>. Dibenzo[ ]crown-m have been used in numerous elegant studies in which they were the needles that were threaded by diverse reagents the resultant... 

The product of the fusion of silica with sodium carbonate, sodium silicate (strictly called sodium poly trioxosilicate but usually metasilicate), dissolves in water to give a clear, viscous solution known as waterglass . It hydrolyses slowly and silica is precipitated. Besides the metasilicate, other silicates of sodium are known, e.g. the poly-tetroxosilicate (orthosilicate), Na4Si04. Only the silicates of the alkali metals are soluble in water. Other silicates, many of which occur naturally, are insoluble, and in these substances the polysilicate anions can have highly complicated structures, all of which are constructed from a unit of one silicon and four oxygen atoms arranged tetrahedrally (cf. the structure of silica). Some of these contain aluminium (the aluminatesilicates) and some have import ant properties and uses. 

The interaction of poly(ethylene oxide) and other polar polymers with metal salts has been known for many years (Bailey and Koleska, 1976). Fenton, Parker and Wright (1973) reported that alkali metal salts form crystalline complexes with poly(ethylene oxide) and a few years later, Wright (1975) reported that these materials exhibit significant ionic conductivity. Armand, Chabagno and Duclot (1978, 1979) recognised the potential of these materials in electro-chemical devices and this prompted them to perform more detailed electrical characterisation. These reports kindled research on the fundamentals of ion transport in polymers and detailed studies of the applications of polymer-salt complexes in a wide variety of devices. 

Polymer electrolytes (e.g., poly (ethylene oxide), poly(propylene oxide)) have attracted considerable attention for batteries in recent years. These polymers form complexes with a variety of alkali metal salts to produce ionic conductors that serve as solid electrolytes. Their use in batteries is still limited due to poor electrode/electrolyte interface and poor room temperature ionic conductivity. Because of the rigid structure, they can also serve as the separator. Polymer electrolytes are discussed briefly in section 6.2. 

Through reduction or oxidation of the molecule by a dopant molecule. Atoms or molecules with high electron affinity, such as iodine, antimony pentafluoride (SbCls), or 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), may oxidize a typical organic semiconductor such as poly(p-phenylene) derivatives, leaving them positively charged. Reduction, i.e., addition of an electron, may be obtained by doping with alkali metals. 

---