Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Plant site

Plant safety Plant sites Plant steroids Plant tissue Plan tvax PLASDOC Plasdone Plasma... [Pg.768]

STAC, with their current new design (pool reactor), feel the only size limitation will be vessel size. Unless both the vessel fabricator and the intended plant site are "on water", a 4-m-diameter is the maximum that can be transported. [Pg.300]

The abrasive industry is highly competitive and many small companies worldwide successfully compete by specializing in a particular segment of the business, eg, disk wheels, mounted points, and mbber wheels. Costs in the fused abrasive industry are primarily in materials and electric power. Thus manufacturers seek out plant sites having the lowest power costs. Costs for coated abrasive manufacturers are capital and labor intensive and they seek out sources of low cost labor. [Pg.16]

The Eastman Chemicals from Coal faciUty is a series of nine complex interrelated plants. These plants include air separation, slurry preparation, gasification, acid gas removal, sulfur recovery, CO /H2 separation, methanol, methyl acetate, and acetic anhydride. A block flow diagram of the process is shown in Eigure 3. The faciUty covers an area of 2.2 x 10 (55 acres) at Eastman s main plant site in Kingsport, Teimessee. The air separation plant is... [Pg.166]

There are several methods of preparing ore for beneficiation after it arrives at the plant site (Fig. 2). (/) The ore is transferred to rod mills,... [Pg.287]

Spent nuclear fuel has fission products, uranium, and transuranic elements. Plans call for permanent disposal in underground repositories. Geological studies are in progress at the Yucca Mountain site in Nevada. Until a repository is completed, spent fuel must be stored in water pools or in dry storage casks at nuclear plant sites. [Pg.181]

Plants need to be mn by people and the avaHabiUty of employees can constitute the overriding consideration in certain businesses, in relation to siting. Labor-intensive businesses have to either move to a location where labor is available or move their employees to the new plant site, which can be cosdy both from the standpoint of the physical move and also with regard to the additional expense of relocating a family from one place to whoUy new surroundings. Older and less flexible work forces often choose to accept eady retirement, quit, or not to relocate. [Pg.87]

R. C. Weisner, J. E. Lemons, Jr., and L. V. Coppa, Valuation oJPotash Occurrence Within the Nuclear Waste Isolation Pilot Plant Site in Southeastern Neir Mexico, U.S. Department of the Interior, Bureau of Mines, Washington, D.C., 1980, p. 6. [Pg.537]

Ammonia is usually transported for long distances by barge, pipeline, and rail, and for short distances by tmck Eactors that govern the type of carrier used in anhydrous ammonia transportation systems are distance, location of plant site in relation to consuming area, availabihty of transportation equipment, and relative cost of available carriers. Typical costs (83) of pipeline, barge, and rail modes for long distance transport are 0.0153, 0.0161, and 0.0215 per ton per kilometer, respectively, for distances of about 1600 km. Short distance tmck transportation costs (83) are much higher. Costs are typically 0.0365/(t km) for distances on the order of 160 km. [Pg.356]

Emissions control systems play an important role at most coal-fired power plants. For example, PC-fired plants sited in the United States require some type of sulfur dioxide control system to meet the regulations set forth in the Clean Air Act Amendments of 1990, unless the boiler bums low sulfur coal or benefits from offsets from other highly controlled boilers within a given utiUty system. Flue-gas desulfurization (FGD) is most commonly accomphshed by the appHcation of either dry- or wet-limestone systems. Wet FGD systems, also referred to as wet scmbbers, are the most effective solution for large faciUties. Modem scmbbers can typically produce a saleable waUboard-quaUty gypsum as a by-product of the SO2 control process (see SULFURREMOVAL AND RECOVERY). [Pg.10]

Paper Products. Paper (qv) products account for about 2% of sulfur demand. The largest single segment of demand is in the manufacture of wood pulp by the sulfite process (see Pulp). In this process, the main sulfur intermediate is sulfur dioxide, which is generally produced at the plant site by burning elemental sulfur. Some sulfur dioxide, however, is produced as a by-product at smelter operations, purified andUquefied, and shipped to the pulp mills. The sulfur dioxide is converted to sulfurous acid, and the salt of this acid is a principal component of the cooking Hquor for the sulfite process. [Pg.125]

Charcoal—sulfur processes need low ash hardwood charcoal, prepared at 400—500°C under controlled conditions. At the carbon disulfide plant site, the charcoal is calcined before use to expel water and residual hydrogen and oxygen compounds. This precalcination step minimises the undesirable formation of hydrogen sulfide and carbonyl sulfide. Although wood charcoal is preferred, other sources of carbon can be used including coal (30,31), lignite chars (32,33), and coke (34). Sulfur specifications are also important low ash content is necessary to minimise fouling of the process equipment. [Pg.29]

Size of GNP and rate of growth Are plant sites readily available ... [Pg.877]

Much of the experience and data from wastewater treatment has been gained from municipal treatment plants. Industrial liquid wastes are similar to wastewater but differ in significant ways. Thus, typical design parameters and standards developed for municipal wastewater operations must not be blindly utilized for industrial wastewater. It is best to run laboratory and small pilot tests with the specific industrial wastewater as part of the design process. It is most important to understand the temporal variations in industrial wastewater strength, flow, and waste components and their effect on the performance of various treatment processes. Industry personnel in an effort to reduce cost often neglect laboratory and pilot studies and depend on waste characteristics from similar plants. This strategy often results in failure, delay, and increased costs. Careful studies on the actual waste at a plant site cannot be overemphasized. [Pg.2213]

Develop a systematic program for removing all accumulated wastes stored on the plant site. [Pg.2261]

Monitoring should include the usual parameters worthy of surveillance in high-speed turbo machinery the temperature of journal bearings, vibration and axial position of the pinions, inlet and discharge temperatures combined with discharge pressure from the individual compressor stages, and various lube oil system devices. Competent manufacturers make sure all measurement locations are completely prewired on the machine and made available at predefined interfaces or in terminal boxes for connection at the plant site. [Pg.134]

Liaison with Top Management on Plant Site Selection and Products Produced... [Pg.433]


See other pages where Plant site is mentioned: [Pg.527]    [Pg.28]    [Pg.45]    [Pg.292]    [Pg.236]    [Pg.478]    [Pg.314]    [Pg.353]    [Pg.70]    [Pg.73]    [Pg.85]    [Pg.85]    [Pg.86]    [Pg.87]    [Pg.87]    [Pg.88]    [Pg.88]    [Pg.89]    [Pg.98]    [Pg.354]    [Pg.103]    [Pg.74]    [Pg.475]    [Pg.17]    [Pg.423]    [Pg.467]    [Pg.468]    [Pg.57]    [Pg.496]    [Pg.230]    [Pg.457]    [Pg.1081]    [Pg.64]    [Pg.139]   
See also in sourсe #XX -- [ Pg.27 ]




SEARCH



© 2024 chempedia.info