Pigments shape

Pearlescent pigment Shape Particle size (pm) Thickness (nm) Density (g/cm3)... 

Pearl luster pigment shape Particle size Thickness Density... 

VUche, JR, Bucharsky, EC, Guidice, C. 2002. Apphcation of EIS and SEM to Evaluate the Influence of Pigment Shape and Content in ZRP Eormulation on the Corrosion Prevention of Naval Steel. Corros. ScL, 44, 1287. 

The effect of pigment shape on the properties of an industrial latex coating was studied in detail. Two red iron oxide pigments with similar properties were studied - one rhombohedral (produced by precipitation) and the other spheroidal (produced by calcination). They were added in the same volume concentration to the coating formulations and several liquid, dry-film, wet film and free-film properties were determined. 17 refs. 

Acryhc and modacryhc fibers are sold mainly as staple and tow products with small amounts of continuous filament fiber sold in Europe and Japan. Staple lengths may vary from 25 to 150 mm, depending on the end use. Eiber deniers may vary from 1.3 to 17 dtex (1.2 to 15 den) 3.2 dtex (3.0 den) is the standard form. The appearance of acryhcs under microscopical examination may differ from that of modacryhcs in two respects. Eirst, the cross sections (Eig. 1) of acryhcs are generally round, bean-shaped, or dogbone-shaped. The modacryhcs, on the other hand, vary from irregularly round to ribbon-like. The modacryhcs may also contain pigment-like particles of antimony oxide to enhance their flame-retardant properties. 

Pigments and Extenders. Pigments are selected for use in house paints based on thek appearance and performance quaUties. Appearance includes color and opacifying abiUty. Performance quaUties include ultraviolet light resistance, fade resistance, exterior weatherabiUty, chemical resistance, as well as particle size and shape. Toxicity profiles and safety and health related properties are also important criteria in pigment selection. 

The value of pigments results from their physical—optical properties. These ate primarily deterrniaed by the pigments physical characteristics (crystal stmcture, particle size and distribution, particle shape, agglomeration, etc) and chemical properties (chemical composition, purity, stabiUty, etc). The two most important physical—optical assets of pigments are the abiUty to color the environment in which they ate dispersed and to make it opaque. 

The most commonly measured pigment properties ate elemental analysis, impurity content, crystal stmcture, particle size and shape, particle size distribution, density, and surface area. These parameters are measured so that pigments producers can better control production, and set up meaningful physical and chemical pigments specifications. Measurements of these properties ate not specific only to pigments. The techniques appHed are commonly used to characterize powders and soHd materials and the measutiag methods have been standardized ia various iadustries. 

Through-ckculation compartments employ perforated or screen bottom trays and suitable flow baffles so gas is forced through the material. If material is not inherently pervious to gas flow, it may be mechanically shaped iato noodles, pellets, or briquettes. These dryers are used ia small-scale operations to dry explosives, foods, and pigments. Dryer efficiency is 50—70%. Based on tray area, water vaporization rates are 1—10 kg/(h-m ). 

---