Phenyl tetrahydrofuran

Dibromoethane normally reacts with activated methylene groups to produce cyclopropyl derivatives [e.g. 25, 27], but not with 1,3-diphenylpropanone. Unlike the corresponding reaction of 1,3-dibromopropane with the ketone to form 2,6-diphenylcyclohexanone, 1,2-dibromoethane produces 2-benzylidene-3-phenyl-tetrahydrofuran and the isomeric 2-benzyl-3-phenyl-4,5-dihydrofuran via initial C-alkylation followed by ring closure onto the carbonyl oxygen atom (Scheme 6.2) [28],... 

Finally, two tetrahydrofurofuran lignans (the stereoisomers asarinin and sesamin, Scheme 12) have been subjected to MTO-catalyzed oxidation. In both cases, the major product originates from oxidative cleavage of one of the phenyl-tetrahydrofuran bonds yielding a lactone. In a CH2Cl2/MeCN mixture using UHP as the oxidant, 65% conversion and 87% selectivity for the lactone is obtained. With immobilized MTO/PVP-2% as catalyst in CH2Cl2/EtOH, similar results are obtained [95]. 

The preparation of 3-phenylfuran from 3-hydroxy-3-phenyl-tetrahydrofuran is described by Wynberg.48 The dehydrogenation was effected by sulfur in dimethylformamide. Sulfur is equally suitable for the preparation of 3,4-diphenylfuran, which is obtained in 25% yield.47 Potassium ferricyanide has also been successfully employed for the dehydrogenation of 3-carbethoxytetrahydrofuran.48... 

C2()H26Bi2Br402) Catena[(jji2-bromo)bromo(phenyl)(tetrahydrofuran)bismuthine] 6.5-70 ... 

C2()H2f,Bi2l402) Catena[(p.2-iodo)iodo(phenyl)(tetrahydrofuran)bismuthine] (1,2-Dimethoxyethane-0,0 )lithium bis(trimethylsilyl)bismuthide 6.5-75 ... 

Solvent effects in the photochemical reaction of A -(2-phenyl-4-penten-l-oxy)-pyridine-2(l//)-thione and Bu3SnH have been studied [36]. Neither the use of tert-butyl benzene, chlorobenzene, bromobenzene, anisole, cyclohexane, tetrahydrofuran, nor ethanol leads to a significant change in yields and selectivities for the formation of 2-methyl-4-phenyl tetrahydrofuran (16) (50-70%, cis/trans 88 12),... 

A 1.5 M soln. of 3-bromo-l-(l,l-dimethylpropoxy)propane dropped onto the equivalent amount of Mg-turnings, the resulting Grignard reagent ice-cooled, stirred, and treated under N2 with 0.8 mole of benzaldehyde in ether, refluxed 30 min. 4-(l,l-dimethylpropoxy)-l-phenyl-l-butanol (Y ca. 90%) heated with a little p-toluenesulfonic acid at 150-165° in an oil bath with distillation of the resulting isoamylene and the product at ca. 25 mm pressure 2-phenyl-tetrahydrofuran (Y 70-90%). F. e. s. W. B. Renfrew et al., J. Org. Ghem. 26, 935 (1961). 

The reaction of the o-iodophenol 275 with an alkylallene affords the bcnzo-furan derivative 276[184], Similarly, the reactions of the 6-hydroxyallenes 277 and 279 with iodobenzene afford the tetrahydrofurans 278 and 280. Under a CO atmosphere, CO insertion takes place before the insertion of the allenyl bond, and a benzoyl group, rather than a phenyl group, attacks the allene carbon to give 280. Reaction of iodobenzene with 4,5-hexadienoic acid (281) affords the furanone derivative 282[185]. 

Several examples of the nucleophilic reactivity of the C-4 atom are known. 2-Phenyl-5 (4HVthiazolinone (212) has been condensed with various aldehydes or ketones in tetrahydrofuran with triethylamine as a catalyst to give 217 (Scheme 110) (392. 442, 444. 445, 447. 450). Mono... 

Peroxides. These are formed by aerial oxidation or by autoxidation of a wide range of organic compounds, including diethyl ether, allyl ethyl ether, allyl phenyl ether, dibenzyl ether, benzyl butyl ether, n-butyl ether, iso-butyl ether, r-butyl ether, dioxane, tetrahydrofuran, olefins, and aromatic and saturated aliphatic hydrocarbons. They accumulate during distillation and can detonate violently on evaporation or distillation when their concentration becomes high. If peroxides are likely to be present materials should be tested for peroxides before distillation (for tests see entry under "Ethers", in Chapter 2). Also, distillation should be discontinued when at least one quarter of the residue is left in the distilling flask. 

A-Fluoro-2,4,6-tnmethylpyndmium inflate (1 mmol) is added m several portions at room temperature to a tetrahydrofuran solution of sodium diethyl phenyl-malonate, obtained from 1 mmol of diethyl phenyl malonate and sodium hydnde at 0 C in tetrahydrofuran The reaction imxture is poured mto dilute hydrochlonc acid and extracted with ether The ether extract is washed with sodium bicarbonate and water and dned over magnesium sulfate The oily residue obtamed after removal of tihe ether is chromatographed on sihca gel (dichloromethane-hexane, 1 1) to give diethyl fluorophenylmalonate in 83% yield... 

Abbreviations Aik, alkyl AN, acetonitrile Ar, aryl Bu, butyl cod, 1,5-cyclooctadiene Cp, cy-clopentadienyl Cp , pentamethylcyclopentadienyl Cy, cyclohexyl dppm, diphenylphosphinome-thane dpme, Ph2PC2H4PMe2 Et, ethyl fod, 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octane-dionate HOMO, highest occupied molecular orbital LUMO, lowest unoccupied molecular orbital Me, methyl MO, molecular orbital nbd, norbornadiene Nuc, nucleophile OTf, triflate Ph, phenyl Pr, propyl py, pyridine THE, tetrahydrofuran TMEDA V,V,M,M-tetramethylethylenediamine. 

Abbreviations acac, acetylacetonate Aik, alkyl AN, acetonitrile bpy, 2,2 -bipyridine Bu, butyl cod, 1,5- or 1,4-cyclooctadiene coe, cyclooctene cot, cyclooctatetraene Cp, cyclopentadienyl Cp, pentamethylcyclopenladienyl Cy, cyclohexyl dme, 1,2-dimethoxyethane dpe, bis(diphenyl-phosphino)ethane dppen, cis-l,2-bis(di[Atenylphosphino)ethylene dppm, bis(diphenylphosphino) methane dppp, l,3-bis(diphenylphosphino)propane eda,ethylenediamine Et,ethyl Hal,halide Hpz, pyrazole HPz, variously substituted pyrazoles Hpz, 3,5-dimethylpyrazole Me, methyl Mes, mesityl nbd, notboma-2,5-diene OBor, (lS)-endo-(-)-bomoxy Ph, phenyl phen, LlO-phenanthroline Pr, f opyl py, pyridine pz, pyrazolate Pz, variously substituted pyrazolates pz, 3,5-dimethylpyrazolate solv, solvent tfb, tetrafluorobenzo(5,6]bicyclo(2.2.2]octa-2,5,7-triene (tetrafluorobenzobanelene) THE, tetrahydrofuran tht, tetrahydrothicphene Tol, tolyl. 

The reaction of l-phenyl-3-cyanomethyl-4-cyano-5-(ethyloxalyl-amino)pyrazole (60) wdth diazomethane in tetrahydrofuran-ether at... 

Abbreviations aapy, 2-acetamidopyridine Aik, alkyl AN, acetoniuile Ar, aryl Bu, butyl cod, 1,5-cyclooctadiene COE, cyclooctene COT, cyclooctatetraene Cp, cyclopentadienyl Cp , penta-methylcyclopentadienyl Cy, cyclohexyl DME, 1,2-dimethoxyethane DME, dimethylformamide DMSO, dimethyl sulfoxide dmpe, dimethylphosphinoethane dppe, diphenylphosphinoethane dppm, diphenylphosphinomethane dppp, diphenylphosphinopropane Et, ethyl Ec, feirocenyl ind, inda-zolyl Me, methyl Mes, mesitylene nb, norbomene orbicyclo[2.2.1]heptene nbd, 2,5-norbomadiene OTf, uiflate Ph, phenyl PPN, bis(triphenylphosphoranylidene)ammonium Pi , propyl py, pyridine pz, pyrazolate pz, substituted pyi azolate pz , 3,5-dimethylpyrazolate quin, quinolin-8-olate solv, solvent tfb, teti afluorobenzobaiTelene THE, tetrahydrofuran THT, tetrahydrothiophene tmeda, teti amethylethylenediamine Tol, tolyl Tp, HB(C3H3N2)3 Tp , HB(3,5-Me2C3HN2)3 Tp, substituted hydrotiis(pyrazol-l-yl)borate Ts, tosyl tz, 1,2,4-triazolate Vin, vinyl. 

Preparation of cholesta-5,7-diene-ia,3/3-diol a solution of 500 mg of the 1,4-cyclized adduct of cholesta-5,7-dien-3/3-ol-ia,2a-epoxideand 4-phenyl-1,2,4-triazoline-3,5-dione in 40 ml of tetrahydrofuran is added dropwise under agitation to a solution of 600 mg of lithium aluminum hydride in 30 ml of THF. Then, the reaction mixture liquid Is gently refluxed and boiled for 1 hour and cooled, and a saturated aqueous solution of sodium sulfate is added to the reaction mixture to decompose excessive lithium aluminum hydride. The organic solvent layer is separated and dried, and the solvent Is distilled. The residue Is purified by chromatography using a column packed with silica gel. Fractions eluted with ether-hexane (7 3 v/v) are collected, and recrystallization from the methanol gives 400 mg of cholesta-5,7-diene-la, 3/3-diol. 

The residue was dissolved in 75 ml of tetrahydrofuran, treated with charcoal, and sodium sulfate and filtered. This solution was added to a solution in 250 ml of tetrahydrofuran of phenyl magnesium bromide prepared from 17.7 ml (0.17 mol) of bromobenzene. This mixture was stirred and heated under reflux for 1 hour. It was then cooled and diluted with 400 ml of ether and sufficient 3N hydrochloric acid to make it acidic. The aqueous phase was separated, adjusted to pH 8 with 3N sodium hydroxide and extracted 3 times with 200 ml of ether. The ether extracts were combined, washed with water and dried over sodium sulfate. The residue left on removal of the ether in vacuo was crystallized from petroleum ether to give 3.3 g of 7-chloro-2,3-dihvdro-1-methyl-5-phenvl-1 H-1,4-benzodiazepine, according to U.S. Patent 3,624,703. 

Attempts to effect ring expansion of methyl 2-azidobenzoate in the presence of other nucleophiles have failed. Thus, photolysis in tetrahydrofuran solution saturated with hydrogen sulfide, or with ammonia, produced methyl 2-aminobenzoate in 54 and 37 % yield, respectively, as the sole identifiable product.197 Photolysis of phenyl azide in ethanolic phenol gave 2-phenoxy-3//-azepine in poor yield (8 %).203,204 2-Mesityl-3//-azepine (10 %) is the surprising, and only tentatively explained, product from the photolysis of phenyl azide in mcsitylene in the presence of trifluoroacetic acid.179... 

The carbanion 5, formed from V,V-diethyl-5-phenyl-3//-azepin-2-amine (4) with potassium amide in liquid ammonia, or with lithium 2,2,6,6-tetramethylpiperidide in tetrahydrofuran, is thiolated by dialkyl or diaryl disulfides to yield 3-(alkylsulfanyl)-3//-azepines, e.g. 6.38... 

Methylmagnesium chloride has been added to various d-(4-substituted-phenyl) <5-oxo esters 15 (X = H, Cl 13, F, Cl, Br, OC11,) which provides the diastereomeric -lactones 1642. The electronic properties of the phenyl 4-substituent have no significant influence on the diastereoselectivity. Except for the 4-methoxyphenyl compound, which is unreactive even at 60 °C, a ratio of ca. 40 60 in favor of the anti-Cram product is observed at 60 "C in tetrahydrofuran as reaction solvent. Lowering the reaction temperature to 0 °C slightly increases the anti-Cram selectivity in the case of the 4-fluoro-, 4-chloro-, and 4-bromo-substituted compounds. On the other hand, a complete loss of reactivity is observed with the <5-phenyl- and <5-(4-methylphenyl)-substituted h-oxo esters. 

Giese and Kretzschmar7j found the rate of addition of hexenyl radicals to methyl acrylate increased 2-fold between aqueous tetrahydrofuran and aqueous ethanol, Salikhov and Fischer74 reported that the rate constant for /-butyl radical addition to acrylonitrile increased 3.6-fold between tetradecane and acetonitrile. Bednarek et al75 found that the relative reactivity of S vs MMA towards phenyl radicals was ca 20% greater in ketone solvents than it was in aromatic solvents. 

Methoxyphenyl)-2-phenyl-lH-imidazole. A 2-L, three-necked, round-bottomed flask equipped with an addition funnel, reflux condenser, and mechanical stirrer is charged with 500 mL of tetrahydrofuran (THF) and 125 mL of water. Benzamidine hydrochloride monohydrate (50 g, 0.29 mol) (Note 1) is added, followed by the slow, portionwise addition of potassium bicarbonate (54.4 g, 0.57 mol) (Note 2). The reaction mixture is vigorously heated to reflux. A solution of 4-methoxyphenacyl bromide (65.3 g, 0.29 mol) in 325 mL of THF is then added dropwise via the addition funnel over a period of 30 min while the reaction is maintained at reflux. After completion of the addition, the mixture is heated at reflux for 18-20 hr (Note 3), then cooled in an ice bath (Note 4), and THF is removed under reduced pressure using a rotary evaporator. An additional 100 mL of water is added, and the resulting suspension is stirred at 50-60°C for 30 min. The mixture is cooled in an ice bath and the solids are collected by filtration. The filter cake is rinsed with two 100-mL portions of water and air-dried in the filter funnel for 2 hr. The crude product is transferred to a 500-mL flask and 150 mL of diisopropyl ether and 150 mL of hexanes are added. The mixture is stirred for 2 hr at room temperature, and the solids are again collected by filtration. The filter cake is dried in a vacuum oven for 48 hr (68°C/ca. 100 mm) to give 68.6 g (96%) of the desired imidazole as an off-white solid (Notes 5, 6). 

---