Peroxides selenides

Hydrogen selenide Hydrogen peroxide, nitric acid... 

Thousands of compounds of the actinide elements have been prepared, and the properties of some of the important binary compounds are summarized in Table 8 (13,17,18,22). The binary compounds with carbon, boron, nitrogen, siUcon, and sulfur are not included these are of interest, however, because of their stabiUty at high temperatures. A large number of ternary compounds, including numerous oxyhaUdes, and more compHcated compounds have been synthesized and characterized. These include many intermediate (nonstoichiometric) oxides, and besides the nitrates, sulfates, peroxides, and carbonates, compounds such as phosphates, arsenates, cyanides, cyanates, thiocyanates, selenocyanates, sulfites, selenates, selenites, teUurates, tellurites, selenides, and teUurides. 

Wet chlorination is performed by sparging slimes slurried either in water or hydrochloric acid using chlorine gas, or other oxidants such as sodium chlorate or hydrogen peroxide which Hberate chlorine from hydrochloric acid, at about 100°C. Under these conditions, selenium and selenides rapidly oxidize and dissolve. 

Hydrogen cyanide Calcium cyanide Potassium cyanide Sodium cyanide Hydrogen fluoride as F Hydrogen peroxide Hydrogen selenide as Se Hydrogen sulphide Hydroquinone... 

Caution Most selenium compounds are toxic consequently care should be exercised in handling them. The hydrogen peroxide oxidation of selenides is highly exothermic, acid-catalyzed, and auto-catalytic. The procedure given for adding the hydrogen peroxide solution should be carefully followed. 

A 30% solution of hydrogen peroxide in water was purchased from Mallinckrodt Chemical Works. The reaction requires 2 molar equivalents of hydrogen peroxide, the first to oxidize the selenide to the selenoxide and the second to oxidize the elimination product, benzeneselenenic acid, to benzeneseleninic acid. The submitters recommend that the hydrogen peroxide solution be taken from a recently opened bottle, or titrated to verify its concentration. 

The selenides prepared by any of these methods can be converted to selenoxides by such oxidants as hydrogen peroxide, sodium metaperiodate, peroxycarboxylic acids, 1-butyl hydroperoxide, or ozone. 

See Hydrogen peroxide Hydrogen selenide Nitric acid Non-metal hydrides... 

A solid-phase synthesis of 3-substituted isoxazoles 31 in good yields and purities was achieved by 1,3-DC of polymer-supported vinyl selenide with in situ generated nitrile oxides treatment of intermediate isoxazolines 30 with an excess of hydrogen peroxide resulted in the release of isoxazoles 31 while the use of Mel/Nal led to 3-substituted 5-iodoisoxazolines... 

Tertiary phosphine sulfides are generally stable compounds and are not easily oxidised by air, although they can be oxidised by hydrogen peroxide or dilute nitric acid. The analogous tertiary phosphine selenides and tellurides are however, more reactive to oxidation. Similar to the sulfides they can be prepared from the direct reaction of elemental chalcogen with a tertiary phosphine (Equation 1). Tertiary phosphine selenides are also accessible from tertiary phosphines using KSeCN as the selenium source instead of the element itself. 

Hydrogen selenide Hydrogen sulfide Hydrogen peroxide, nitric acid Fuming nitric acid, oxidizing gases, peroxides... 

Selenium-catalysed epoxidations have been carried out using a perfluo-roalkylated phenylselenide together with hydrogen peroxide, as shown in Scheme 9.6 [13]. The catalyst could be recycled 10 times with no loss of activity, with the toxic selenide immobilized in the perfluorinated solvent. 

A series of substituted diaryselenides were examined in three lipid peroxidation model systems isolated rat liver microsomes treated with Fe(II)/(ADP)/ascorbate and isolated rat hepatocytes treated with two different initiators of oxidation. In rat hepatocytes, all of the tellurides performed more effectively than the selenides. Particularly for the rat liver microsome system, the substituent effects on lipid peroxidation were consistent with what would be expected Electron-donating groups give more active compounds, while electron-withdrawing groups give poorer antioxidants. The same trends were seen for substituted diaryItellurides in inhibition of linoleic acid peroxidation in a two-phase model, where the dimethylamino... 

Polymer stabilization is another area in which the peroxide-decomposing and chain-breaking antioxidant properties of diorganotellurides has found utUity. Alone or in combination with phenol and phosphate antioxidants, electron-rich dialkylamino-substirnted diaryltellurides and alkylaryltellurides provided greatly enhanced polymer stability for a thermoplastic elastomer and for polypropylene. The effects were unique to the tellurides, with selenides not providing similar protective effects. ... 

Teeth whiteners, percarbamide, 623 Temperature, reaction rates, 903-12 Terminal olefins, selenide-catalyzed epoxidation, 384-5 a-Terpinene, peroxide synthesis, 706 a-Terpineol, preparation, 790 Terrorists, dialkyl peroxide explosives, 708 Tertiary amines, dioxirane oxidation, 1152 Tertiary hydroperoxides, structural characterization, 690-1... 

Treatment of the selenide (19) with unbuffered 30% hydrogen peroxide-THF yields the cis- and trans-linalyl oxides (247) via [2,3] sigmatropic rearrangement. Kossanyi et al. have improved upon the efficiency of Vig s synthesis of the four lilac alcohols (248). The synthesis of the furanoid (249), formed during sulphuric acid-catalysed dimerization of isoprene, is straightforward. The known half-... 

Oxidation of an a-silyl selenide with hydrogen peroxide leads to an aldehyde, silanol and selenol as the primary products [253]. Evidently, the fragmentation proceeds only after contrapolarization at Se, the intermediate now having an a-d-a array. 

---