Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Partial dienes

This method of selective tropone cyclopropanation and partial diene hydrogenation, via formation of 28, was applied to the total synthesis of ( + )-cyclocolorenone. ... [Pg.1857]

After return to the Commander window, the reaction retrieval may be executed separately 629 Dicls-Aldcr reactions between aliphatic dienes and cyclic dicno-pliiles are found. This partial result can be narrowed down by restricting tlie reaction conditions by means of the fact editor, The search field codes for the yield and the temperature can be found to be RX.NYD and RX.T, respectively, either by browsing the database structure or by applying the Find option, as described in the first example. To ensure that the retrieved reaction conditions belong to the same experiment, both search terms must be connected by means of the PROXIMITY operator. Before the retrieval is started, the option "Refine results in... [Pg.255]

The mechanism of the PdCh-catalyzed Cope rearrangement has been studied by use of the partially deuterated 1.5-diene 53[46], The coordination of Pd(II) activates the alkene, and cyclization (carbopalladation) takes place to... [Pg.534]

One of the butadiene dimeri2ation products, COD, is commercially manufactured and used as an intermediate in a process called FEAST to produce linear a,C0-dienes (153). COD or cyclooctene [931-87-3], obtained from partial hydrogenation, is metathesi2ed with ethylene to produce 1,5-hexadiene [592-42-7] or 1,9-decadiene [1647-16-1], respectively. Many variations to make other diolefins have been demonstrated. Huls AG also metathesi2ed cyclooctene with itself to produce an elastomer useful in mbber blending (154). The cycHc cis,trans,trans-tn.en.e described above can be hydrogenated and oxidi2ed to manufacture dodecanedioic acid [693-23-2]. The product was used in the past for the production of the specialty nylon-6,12, Qiana (155,156). [Pg.344]

The two most commonly applied systems for naming polycyclic parents are in some ways complementary. Fusion nomenclature provides names for structures containing the maximum number of non-cumulative double bonds von Baeyer nomenclature (Section 1.02.3.4) names fully saturated structures. Thus names for partially hydrogenated structures can be arrived at either by adding hydro prefixes to fusion names or ene , diene , etc. suffixes to von Baeyer names (see examples 29 and 30). If needed, rules are available for... [Pg.20]

The transition state involves six partially delocalized electrons being transformed from one 1,5-diene system to another. The transition state could range in character from a 1,4-diradical to two nearly independent allyl radicals, depending on whether bond making or bond breaking is more advanced. The general framework for understanding the substituent effects is that the reactions are concerted with a relatively late transition state with well-developed C(l)—C(6) bonds. [Pg.626]

A more efficient agent than peroxy compounds for the epoxidation of fluoro-olefins with nonfluonnated double bond is the hypofluorous acid-acetomtrile complex [22] Perfluoroalkylethenes react with this agent at room temperature within 2-3 h with moderate yields (equation 13), whereas olefins with strongly electron-deficient double bond or electron-poor, sterically hindered olefins, for example l,2-bis(perfluorobutyl)ethene and perfluoro-(l-alkylethyl)ethenes, are practically inert [22] Epoxidation of a mixture of 3 perfluoroalkyl-1-propenes at 0 C IS finished after 10 mm in 80% yield [22] The trifluorovinyl group in partially fluorinated dienes is not affected by this agent [22] (equation 13)... [Pg.326]

Certain trifluoromethyl-substituted 1,2,4,5 tetrazines [260, 26i] and 1,2,4 triazines [i06] can be used as cyclic hetero-1,3-dienes and provide efficient preparative routes to partially fluorinated heterocycles (equations 55 and 56)... [Pg.873]

Examine the geometry of methylbenzyne. Measure carbon-earbon distances. Which 7C bonds are deloealized and whieh are localized Is there really a triple bond (Compare bond distance to triple bond in hexa-l,5-dien-3-yne and to partial double bonds in benzene). Are you able to draw a single Lewis structure whieh adequately represents the geometry of the molecule ... [Pg.197]

If the diene is unsymmetrical, there may be two 1,2-addition products. The competition between two types of addition product comes about because the carbocation resulting from attack by Y is a resonance hybrid, with partial positive charges at the 2 and 4 positions ... [Pg.979]

The partial arene derivative hydrogenation into cyclohexene or cyclohexa-diene as intermediates is also investigated. The process developed by Asahi Chemical Industry in Japan is an example of the selective formation of cyclohexene [6]. In the future, this reaction could be an active area of research due to the potential of the intermediate in organic synthesis. [Pg.262]

The localized-valence halogen-bridged platinum(II)/platinum(IV) complexes (175) are of interest because of their highly anisotropic electrical and optical properties. The complexes are characterized by broad and intense intervalence bands in their electronic spectra.542 Partial oxidation of [PtCl(dien)]Cl with iodine yields the mixed valence species [PtI(dien)][PtI3(dien)]I2,543 but when 4Me-dien is used, the mixed valence compound is only obtained if it is trapped quickly, before isomerization of the meridional platinum(IV) complex to a facial form.544 Although these species nominally have localized valences, the extent of delocalization increases as the bridging halide... [Pg.733]

The chromatograms of the liquid phase show the presence of smaller and larger hydrocarbons than the parent one. Nevertheless, the main products are n-alkanes and 1-alkenes with a carbon number between 3 to 9 and an equimolar distribution is obtained. The product distribution can be explained by the F-S-S mechanism. Between the peaks of these hydrocarbons, it is possible to observe numerous smaller peaks. They have been identified by mass spectrometry as X-alkenes, dienes and also cyclic compounds (saturated, partially saturated and aromatic). These secondary products start to appear at 400 °C. Of course, their quantities increase at 425 °C. As these hydrocarbons are not seen for the lower temperature, it is possible to imagine that they are secondary reaction products. The analysis of the gaseous phase shows the presence of hydrogen, light alkanes and 1-alkenes. [Pg.351]

Additional evidence of this pattern of behavior is shown upon treatment of the conjugated diene 1-propenylcyclohexene with two equivalents of triethylsilane and three equivalents of trifluoroacetic acid at 50°. This diene gives a 70% yield of completely reduced propylcyclohexane after 10 hours (Eq. 90).231 No partially reduced intermediates are found. [Pg.42]


See other pages where Partial dienes is mentioned: [Pg.224]    [Pg.385]    [Pg.430]    [Pg.443]    [Pg.38]    [Pg.35]    [Pg.226]    [Pg.9]    [Pg.40]    [Pg.485]    [Pg.372]    [Pg.870]    [Pg.564]    [Pg.134]    [Pg.316]    [Pg.230]    [Pg.568]    [Pg.507]    [Pg.270]    [Pg.310]    [Pg.36]    [Pg.12]    [Pg.177]    [Pg.141]    [Pg.254]    [Pg.261]    [Pg.274]    [Pg.49]    [Pg.1269]    [Pg.81]    [Pg.116]    [Pg.161]    [Pg.32]    [Pg.7]    [Pg.140]    [Pg.87]   
See also in sourсe #XX -- [ Pg.220 ]




SEARCH



Dienes partial reduction

© 2024 chempedia.info