Ozonolysis formation

Dehydration of 2 2 3 4 4 pentamethyl 3 pentanol gave two alkenes A and B Ozonolysis of the lower boiling alkene A gave formaldehyde (H2C=0) and 2 2 4 4 tetramethyl 3 pentanone Ozonolysis of B gave formaldehyde and 3 3 4 4 tetramethyl 2 pentanone Identify A and B and suggest an explanation for the formation of B in the dehydration reaction... 

Examples are given of common operations such as absorption of ammonia to make fertihzers and of carbon dioxide to make soda ash. Also of recoveiy of phosphine from offgases of phosphorous plants recoveiy of HE oxidation, halogenation, and hydrogenation of various organics hydration of olefins to alcohols oxo reaction for higher aldehydes and alcohols ozonolysis of oleic acid absorption of carbon monoxide to make sodium formate alkylation of acetic acid with isobutylene to make teti-h ty acetate, absorption of olefins to make various products HCl and HBr plus higher alcohols to make alkyl hahdes and so on. 

Tomoi and coworkers adopted a somewhat more direct approach in their synthesis of 16-crown-5 derivatives bearing a single alkenyl residue. They hoped to obtain precursors to polymers which could be used as phase transfer catalysts. In this approach I,I-bis-chloromethylethylene (a-chloromethallyl chloride) was allowed to react with the dianion of tetraethylene glycol (NaH/THF). By this method, methylene-16-crown-5 could be isolated in 66% yield after vacuum distillation. Ozonolysis led, in almost quantitative yield, to the formation of oxo-16-crown-5 as shown in Eq. (3.38). These authors prepared a number of other, closely related species by similar methods. 

From their structures, it appears that the hydrolytic stability of macrocyclic lactones must necessarily be inferior to macrocyclic polyethers. Ease of synthesis of the cyclic esters is therefore one of the aspects which commend them to interest. It is probably for this reason that such lactones have not been made more often by the interesting approach of Kdgel and Schroder . These workers report the ozonolysis of dibenzo-18-crown-6 in a mixture of methanol and dichloromethane at —20°. Reduction of the ozon-ide at —75° using dimethylsulfide followed by warming and addition of acetone led to formation of 6 in 14% yield. The bis-oxalate had mp 164—165° from acetone, very similar to that of the starting crown. The transformation is illustrated below in Eq. (5.9). 

A 20) oiefin Formation via Enol Acetates and Ozonolysis A stock solution of acetylating mixture is prepared by dissolving 0.2 ml of 70-72% perchloric acid in 5 ml of acetic anhydride. To a solution of 5 g of 3a,6a-diacetoxy-5jff-pregnan-20-one in 50 ml of carbon tetrachloride is added 5 ml of the above stock perchloric acid-acetic anhydride solution and the mixture is allowed to stand at room temperature for 1.25 hr. The mixture is... 

An excellent synthetic method for asymmetric C—C-bond formation which gives consistently high enantioselectivity has been developed using azaenolates based on chiral hydrazones. (S)-or (/ )-2-(methoxymethyl)-1 -pyrrolidinamine (SAMP or RAMP) are chiral hydrazines, easily prepared from proline, which on reaction with various aldehydes and ketones yield optically active hydrazones. After the asymmetric 1,4-addition to a Michael acceptor, the chiral auxiliary is removed by ozonolysis to restore the ketone or aldehyde functionality. The enolates are normally prepared by deprotonation with lithium diisopropylamide. 

By using 300 ml. of methanol at this point, the checkers were able to avoid crust formation on the gas-dispersion tube during ozonolysis (see Note 5). 

The molozonide was unstable and would either rearrange into the isozonide or form polymers. While Staudinger s theory explained the formation of the major products, some of the by-products could not be accounted for. The greatest step toward complete elucidation of the ozonolysis reaction was made by Criegee (Ref 3) In the 1950s. From a study of ozonolysis in various solvents and the constitution of the products, Criegee proposed these reactions ... 

The location of the position of double bonds in alkenes or similar compounds is a difficult process when only very small amounts of sample are available [712,713]. Hass spectrometry is often unsuited for this purpose unless the position of the double bond is fixed by derivatization. Oxidation of the double bond to either an ozonide or cis-diol, or formation of a methoxy or epoxide derivative, can be carried out on micrograms to nanograms of sample [713-716]. Single peaks can be trapped in a cooled section of a capillary tube and derivatized within the trap for reinjection. Ozonolysis is simple to carry out and occurs sufficiently rapidly that reaction temperatures of -70 C are common [436,705,707,713-717]. Several micro-ozonolysis. apparatuses are commercially available or can be readily assembled in the laboratory using standard equipment and a Tesla coil (vacuum tester) to generate the ozone. Reaction yields of ozonolysis products are typically 70 to 95t, although structures such as... 

Ozonolysis in the presence of NaOH or NaOCH3 in methanol with CH2C12 as a cosolvent leads to formation of esters. This transformation proceeds by trapping both... 

The suggested fragments from (54a) are a carbonyl compound (58) and a peroxy zwitterion (59), the latter then effecting a 1,3-dipolar addition on the former to yield the ozonide (57a). Alternative reactions of the zwitterion (59), including its polymerisation, lead to the formation of the abnormal products that are sometimes observed in addition to the ozonide, If ozonolysis is carried out in MeOH as solvent then (59) is trapped , as it is formed, by its conversion into the relatively stable a-hydroperoxy ether (60) ... 

The crude products of ozonolysis at — 30°C of the chloroalkene tended to decompose explosively on warming to ambient temperature, particularly in absence of solvents. The products included the individually explosive compounds acetyl 1,1,-dichloroethyl peroxide, 3,6-dichloro-3,6-dimethyl-2,3,5,6-tetraoxane and diacetyl peroxide [1], Ozonolysis in ethyl formate saturated with hydrogen chloride gives a high yield of 1,1-dichloroethyl hydroperoxide as a further unstable intermediate product [2],... 

The transformation of the cyano group could also introduce a new chiral center under diastereoselective control (Figure 5.13). Grignard-transimination-reduction sequences have been employed in a synthesis of heterocyclic analogues of ephedrine [81]. The preferential formation of erythro-/3-amino alcohols may be explained by preferential hydride attack on the less-hindered face of the intermediate imine [82], and hydrocyanation of the imine would also appear to proceed via the same type of transition state. In the case of a,/3-unsaturated systems, reduction- transimination-reduction may be followed by protection of the /3-amino alcohol to an oxazolidinone, ozonolysis with oxidative workup, and alkali hydrolysis to give a-hydroxy-/3-amino acids [83]. This method has been successfully employed in the synthesis L-threo-sphingosine [84]. 

Iridium-catalyzed transfer hydrogenation of aldehyde 73 in the presence of 1,1-dimethylallene promotes tert-prenylation [64] to form the secondary neopentyl alcohol 74. In this process, isopropanol serves as the hydrogen donor, and the isolated iridium complex prepared from [Ir(cod)Cl]2, allyl acetate, m-nitrobenzoic acid, and (S)-SEGPHOS is used as catalyst. Complete levels of catalyst-directed diastereoselectivity are observed. Exposure of neopentyl alcohol 74 to acetic anhydride followed by ozonolysis provides p-acetoxy aldehyde 75. Reductive coupling of aldehyde 75 with allyl acetate under transfer hydrogenation conditions results in the formation of homoallylic alcohol 76. As the stereochemistry of this addition is irrelevant, an achiral iridium complex derived from [Ir(cod)Cl]2, allyl acetate, m-nitrobenzoic acid, and BIPHEP was employed as catalyst (Scheme 5.9). 

When the enol (XCVII) of 5-keto-4-desoxy-mannosaccharo-3,6-lactone is subjected to ozonolysis, cleavage occurs at the double bond with the formation of oxalic acid and p-erythuronic acid (XCVIII), the latter being identified by the fact that upon oxidation with bromine it yields mcao-tartaric acid (XCIX). The formation of oxalic acid and erythu-ronic acid locates the double bond in XCVII between C4 and C5 and demonstrates that C4 carries a hydrogen atom while C5 has attached to... 

This imide system can also be used for the asymmetric synthesis of optically pure a,a-disubstituted amino aldehydes, which can be used in many synthetic applications.31 These optically active a-amino aldehydes were originally obtained from naturally occurring amino acids, which limited their availability. Thus, Wenglowsky and Hegedus32 reported a more practical route to a-amino aldehydes via an oxazolidinone method. As shown in Scheme 2 20, chiral diphenyl oxazolidinone 26 is first converted to allylic oxazolidinone 27 subsequent ozonolysis and imine formation lead to compound 28, which is ready for the a-alkylation using the oxazolidinone method. The results are shown in Table 2-6. 

This aldol reaction was employed for an asymmetric synthesis of the azetidinone 9 from the adduct (5) of acetaldehyde and l.5 Azetidinone 9 is a versatile precursor to the antibiotic thienamycin 10. The configurationally stable aldehyde 6, obtained by ozonolysis of the silyl ether of 5, undergoes addition with allylzinc chloride to afford 7, which on transamination is converted to the N-methoxy amide 8. This product is converted in several steps to the desired 9 in 34% overall yield. An interesting feature of this synthesis is the early incorporation of the hydroxyethyl side chain at C6, a step that is difficult to effect after formation of the (3-lactam ring. 

---