Oxidation reactions peroxide

Detecting the presence of small, even invisible, amounts of blood is routine. Physical characteristics of dried stains give minimal information, however, as dried blood can take on many hues. Many of the chemical tests for the presence of blood rely on the catalytic peroxidase activity of heme (56,57). Minute quantities of blood catalyze oxidation reactions between colorless materials, eg, phenolphthalein, luco malachite green, luminol, etc, to colored or luminescent ones. The oxidant is typically hydrogen peroxide or sodium perborate (see Automated instrumentation,hematology). 

Oxidation. The oxidation reactions of organoboranes have been reviewed (5,7,215). Hydroboration—oxidation is an anti-Markovnikov cis-hydration of carbon—carbon multiple bonds. The standard oxidation procedure employs 30% hydrogen peroxide and 3 M sodium hydroxide. The reaction proceeds with retention of configuration (216). 

The radicals are then involved in oxidations such as formation of ketones (qv) from alcohols. Similar reactions are finding value in treatment of waste streams to reduce total oxidizable carbon and thus its chemical oxygen demand. These reactions normally are conducted in aqueous acid medium at pH 1—4 to minimize the catalytic decomposition of the hydrogen peroxide. More information on metal and metal oxide-catalyzed oxidation reactions (Milas oxidations) is available (4-7) (see also Photochemical technology, photocatalysis). 

Oxidation. Hydrogen peroxide is a strong oxidant. Most of its uses and those of its derivatives depend on this property. Hydrogen peroxide oxidizes a wide variety of organic and inorganic compounds, ranging from iodide ions to the various color bodies of unknown stmcture in ceUulosic fibers. The rate of these reactions may be quite slow or so fast that the reaction occurs on a reactive shock wave. The mechanisms of these reactions are varied and dependent on the reductive substrate, the reaction environment, and catalysis. Specific reactions are discussed in a number of general and other references (4,5,32—35). 

Because the reaction takes place in the Hquid, the amount of Hquid held in the contacting vessel is important, as are the Hquid physical properties such as viscosity, density, and surface tension. These properties affect gas bubble size and therefore phase boundary area and diffusion properties for rate considerations. Chemically, the oxidation rate is also dependent on the concentration of the anthrahydroquinone, the actual oxygen concentration in the Hquid, and the system temperature (64). The oxidation reaction is also exothermic, releasing the remaining 45% of the heat of formation from the elements. Temperature can be controUed by the various options described under hydrogenation. Added heat release can result from decomposition of hydrogen peroxide or direct reaction of H2O2 and hydroquinone (HQ) at a catalytic site (eq. 19). 

Glycohc acid also undergoes reduction or hydrogenation with certain metals to form acetic acid, and oxidation by hydrogen peroxide ia the presence of ferrous salts to form glyoxylic acid [298-12A], HCOCOOH, and ia the presence of ferric salts ia neutral solution to form oxaHc acid, HOOCCOOH formic acid, HCOOH and Hberate CO2 and H2O. These reduction and oxidation reactions are not commercially significant. 

Weak to moderate chemiluminescence has been reported from a large number of other Hquid-phase oxidation reactions (1,128,136). The Hst includes reactions of carbenes with oxygen (137), phenanthrene quinone with oxygen in alkaline ethanol (138), coumarin derivatives with hydrogen peroxide in acetic acid (139), nitriles with alkaline hydrogen peroxide (140), and reactions that produce electron-accepting radicals such as HO in the presence of carbonate ions (141). In the latter, exemplified by the reaction of h on(II) with H2O2 and KHCO, the carbonate radical anion is probably a key intermediate and may account for many observations of weak chemiluminescence in oxidation reactions. 

AH of the commercial inorganic peroxo compounds except hydrogen peroxide are described herein, as are those commercial organic oxidation reactions that are beheved to proceed via inorganic peroxo intermediates. Ozonides and superoxides are also included, but not the dioxygen complexes of the transition metals. 

Metals. Transition-metal ions, such as iron, copper, manganese, and cobalt, when present even in small amounts, cataly2e mbber oxidative reactions by affecting the breakdown of peroxides in such a way as to accelerate further attack by oxygen (36). Natural mbber vulcani2ates are especially affected. Therefore, these metals and their salts, such as oleates and stearates, soluble in mbber should be avoided. 

Chemical Antioxidant Systems. The antioxidant activity of tea extracts and tea polyphenols have been determined using in vitro model systems which are based on hydroxyl-, peroxyl-, superoxide-, hydrogen peroxide-, and oxygen-induced oxidation reactions (109—113). The effectiveness of purified tea polyphenols and cmde tea extracts as antioxidants against the autoxidation of fats has been studied using the standard Rancimat system, an assay based on air oxidation of fats or oils. A direct correlation between the antioxidant index of a tea extract and the concentration of epigallocatechin gallate in the extract was found (107). 

Oxidation. Disulfides are prepared commercially by two types of reactions. The first is an oxidation reaction uti1i2ing the thiol and a suitable oxidant as in equation 18 for 2,2,5,5-tetramethyl-3,4-dithiahexane. The most common oxidants are chlorine, oxygen (29), elemental sulfur, or hydrogen peroxide. Carbon tetrachloride (30) has also been used. This type of reaction is extremely exothermic. Some thiols, notably tertiary thiols and long-chain thiols, are resistant to oxidation, primarily because of steric hindrance or poor solubiUty of the oxidant in the thiol. This type of process is used in the preparation of symmetric disulfides, RSSR. The second type of reaction is the reaction of a sulfenyl haUde with a thiol (eq. 19). This process is used to prepare unsymmetric disulfides, RSSR such as 4,4-dimethyl-2,3-dithiahexane. Other methods may be found in the Hterature (28). 

Similar hydroxylation-oxidations can be carried out using a catalytic amount of osmium tetroxide with A-methylmorpholine oxide-hydrogen peroxide or phenyliodosoacetate." A recent patent describes the use of triethylamine oxide peroxide and osmium tetroxide for the same sequence. Since these reactions are of great importance for the preparation of the di-hydroxyacetone side-chain of corticoids, they will be discussed in a later section. 

AMcycUc perfluoroketones undergo similar oxidation reactions as aromaUc fluoroaldehydes (equation 61). a lower concentration of hydrogen peroride oxidizes the ketones to a-hydroxy hydroperoxides [72], whereas concentrated hydrogen peroxide converts them to I,l -dihydroxydi(petfluorocycloalkyl) peroxides [16, 73] (equation 64). 

In addition to having typical A -oxide reactions, quinazoline 3-oxide also shows the same reactivity as quinazoline toward nucleophilic reagents, but the reaction goes a step further by eliminating water as shown in reaction 2d. Oxidation with hydrogen peroxide... 

Horner and Jurgens39 reported that benzoyl peroxides 21 in the presence of sulphides decompose to give sulphoxides and a-acyloxysulphides 22 (equation 8). The latter compounds are undoubtedly formed as a result of the Pummerer reaction. The oxidation reaction leading to sulphoxides has been shown to be an ionic process40. However, till now it has not found wider synthetic applications. Ganem and coworkers41 showed that 2-hydroperoxyhexafluoro-2-propanol 23 formed in situ from hexafluoroacetone and... 

Photochemical synthesis of sulphoxides was reported for the first time by Foote and Peters111 in 1971. They found that dialkyl sulphides undergo smoothly dye-photosensitized oxidation to give sulphoxides (equation 32). This oxidation reaction has been postulated to proceed through an intermediate adduct 63, which could be a zwitterionic peroxide, a diradical or cyclic peroxide, which then reacts with a second molecule of sulphide to give the sulphoxide (equation 33). 

As an oxidant, hydrogen peroxide may be used either alone or in the presence of a catalyst. Such reactions are often carried out using acetic acid as a solvent. These latter reactions strictly involve oxidation by peracetic acid and will be dealt with in the next section. 

Although most reactions are carried out under alkaline conditions, there is also a reaction described at pH <7 [22]. Instead of using oxygen for the oxidation reaction, the reaction is also carried out with 90% rm-butylhydropero-xide in 10% ter/-butylalcohol [23] or with hydrogen peroxide [24]. 

Oxidation reactions are generally problematic because of their large heat release. For instance, the oxidation reaction of sodium thiosulfate, Na2 S2O3, by hydrogen peroxide, H2O2, for which the stoichiometric scheme is... 

Enichem made one of the most important steps forward in the development of general heterogeneous oxidation catalysts in the early 1990s with the commercialization of titanium silicate (TS-1) catalysts. TS-1 has a structure similar to ZSM-5 in which the aluminium has been replaced by titanium it is prepared by reaction of tetraethylorthosilicate and tetra-ethylorthotitanate in the presence of an organic base such as tetrapropy-lammonium hydroxide. This catalyst is especially useful for oxidation reactions using hydrogen peroxide (Scheme 4.11), from which the only byproduct is water, clean production of hydroquinone being one of the possibilities. 

The presence of arsenous acid causes a considerable change in the induced reaction the error in the H2O2 determination decreases to a minimum and an As(ril) error appears, while the S2OI error remains practically unchanged. Though reaction between arsenic(III) and peroxydisulphate is about ten times as rapid as that between hydrogen peroxide and peroxydisulphate, the extent of the induced reduction of peroxydisulphate remains practically unchanged. This indicates that, in the induced chain oxidation, reaction (85), is replaced by the more rapid reaction... 

It was found that the value of F, is markedly increased by ions which are effective catalysts of oxidation reactions of peroxydisulphate. These are silver(I) copper(n), and iron(III). Cobalt(II) and nickel(II) ions, although they are good catalysts for the decomposition of hydrogen peroxide, exert their effect merely as inert electrolytes in the induced reaction. Therefore it can be concluded that, in this process, activation of the rather less reactive 8203 is more important than that of hydrogen peroxide . ... 

---