Oxidation methyl esters

Protection of 194 as a p-methoxybenzylether and subsequent epoxydation led to the trans-epoxide 195, which was transformed into the unsaturated aldehyde 196 by a three-reaction sequence, including regioselective oxirane opening with a 1,3-dithiane anion, hydrolysis of the dithioacetal formed, and dehydration. Chlorite promoted aldehyde oxidation, methyl ester formation, and removal of the hydroxyl protections delivered methyl (+)-shikimate 197 in a remarkable 12% yield from 193. 

The same group reported a second multiphase flow system for the aerobic oxidation of alcohols, catalyzed by bimetallic nanoclusters (Au-Pt and Au-Pd) in a packed-bed configuration [29]. In addition, the direct oxidative methyl ester formation of various aliphatic and benzylic alcohols was achieved, showing much higher yields and selectivities as compared with its batch counterpart. 

Nishida, T.H., Tsuchiyama, H., Inoue, M. and Kummerow, F.A. (1960) Effect of intravenous injection of oxidized methyl esters of unsaturated fatty acids on chick encepha-lomalacia. Proc. Soc. Exp. Biol. Med. 105, 308-312. 

The oxidation of the cyclic enol ether 93 in MeOH affords the methyl ester 95 by hydrolysis of the ketene acetal 94 formed initially by regioselective attack of the methoxy group at the anomeric carbon, rather than the a-alkoxy ketone[35]. Similarly, the double bond of the furan part in khellin (96) is converted ino the ester 98 via the ketene acetal 97[l23],... 

Poly(acrylic acid) and Poly(methacrylic acid). Poly(acryHc acid) (8) (PAA) may be prepared by polymerization of the monomer with conventional free-radical initiators using the monomer either undiluted (36) (with cross-linker for superadsorber appHcations) or in aqueous solution. Photochemical polymerization (sensitized by benzoin) of methyl acrylate in ethanol solution at —78° C provides a syndiotactic form (37) that can be hydrolyzed to syndiotactic PAA. From academic studies, alkaline hydrolysis of the methyl ester requires a lower time than acid hydrolysis of the polymeric ester, and can lead to oxidative degradation of the polymer (38). Po1y(meth acrylic acid) (PMAA) (9) is prepared only by the direct polymerization of the acid monomer it is not readily obtained by the hydrolysis of methyl methacrylate. 

Methyl ester hydrogenation process subtotal 474 Oxidation processes ... 

Secondary alcohols (C q—for surfactant iatermediates are produced by hydrolysis of secondary alkyl borate or boroxiae esters formed when paraffin hydrocarbons are air-oxidized ia the presence of boric acid [10043-35-3] (19,20). Union Carbide Corporation operated a plant ia the United States from 1964 until 1977. A plant built by Nippon Shokubai (Japan Catalytic Chemical) ia 1972 ia Kawasaki, Japan was expanded to 30,000 t/yr capacity ia 1980 (20). The process has been operated iadustriaHy ia the USSR siace 1959 (21). Also, predominantiy primary alcohols are produced ia large volumes ia the USSR by reduction of fatty acids, or their methyl esters, from permanganate-catalyzed air oxidation of paraffin hydrocarbons (22). The paraffin oxidation is carried out ia the temperature range 150—180°C at a paraffin conversion generally below 20% to a mixture of trialkyl borate, (RO)2B, and trialkyl boroxiae, (ROBO). Unconverted paraffin is separated from the product mixture by flash distillation. After hydrolysis of residual borate esters, the boric acid is recovered for recycle and the alcohols are purified by washing and distillation (19,20). 

Silver carbonate, alone or on CeHte, has been used as a catalyst for the oxidation of methyl esters of D-fmctose (63), ethylene (64), propylene (65), trioses (66), and a-diols (67). The mechanism of the catalysis of alcohol oxidation by silver carbonate on CeHte has been studied (68). 

The handling of toxic materials and disposal of ammonium bisulfate have led to the development of alternative methods to produce this acid and the methyl ester. There are two technologies for production from isobutylene now available ammoxidation to methyl methacrylate (the Sohio process), which is then solvolyzed, similar to acetone cyanohydrin, to methyl methacrylate and direct oxidation of isobutylene in two stages via methacrolein [78-85-3] to methacryhc acid, which is then esterified (125). Since direct oxidation avoids the need for HCN and NH, and thus toxic wastes, all new plants have elected to use this technology. Two plants, Oxirane and Rohm and Haas (126), came on-stream in the early 1980s. The Oxirane plant uses the coproduct tert-huty alcohol direcdy rather than dehydrating it first to isobutylene (see Methacrylic acid). 

Sorbitol is the most important higher polyol used in direct esterification of fatty acids. Esters of sorbitans and sorbitans modified with ethylene oxide are extensively used as surface-active agents. Interesteritication of fatty acid methyl esters with sucrose yields biodegradable detergents, and with starch yields thermoplastic polymers (36). 

Pyrolytic Decomposition. The pyrolytic decomposition at 350—460°C of castor oil or the methyl ester of ricinoleic acid spHts the ricinoleate molecule at the hydroxyl group forming heptaldehyde and undecylenic acids. Heptaldehyde, used in the manufacture of synthetic flavors and fragrances (see Elavors and spices Perfumes) may also be converted to heptanoic acid by various oxidation techniques and to heptyl alcohol by catalytic hydrogenation. When heptaldehyde reacts with benzaldehyde, amyl cinnamic aldehyde is produced (see Cinnamic acid, cinnamaldehyde, and cinnamyl... 

Secondary alcohols are oxidized at room temperature to ketones in high yields by HOCl generated in situ from aqueous NaOCl and acetic acid (109,110). Selective oxidation in the presence of a primary alcohol is possible. In methanol, aldehydes are oxidized to methyl esters (110). Under the proper conditions, alcohols can be esterified with HOCl forming isolable alkyl hypochlorites. 

Many of the surfactants made from ethyleneamines contain the imidazoline stmcture or are prepared through an imidazoline intermediate. Various 2-alkyl-imidazolines and their salts prepared mainly from EDA or monoethoxylated EDA are reported to have good foaming properties (292—295). Ethyleneamine-based imida zolines are also important intermediates for surfactants used in shampoos by virtue of their mildness and good foaming characteristics. 2- Alkyl imidazolines made from DETA or monoethoxylated EDA and fatty acids or their methyl esters are the principal commercial intermediates (296—298). They are converted into shampoo surfactants commonly by reaction with one or two moles of sodium chloroacetate to yield amphoteric surfactants (299—301). The ease with which the imidazoline intermediates are hydrolyzed leads to arnidoamine-type stmctures when these derivatives are prepared under aqueous alkaline conditions. However, reaction of the imidazoline under anhydrous conditions with acryflc acid [79-10-7] to make salt-free, amphoteric products, leaves the imidazoline stmcture essentially intact. Certain polyamine derivatives also function as water-in-oil or od-in-water emulsifiers. These include the products of a reaction between DETA, TETA, or TEPA and fatty acids (302) or oxidized hydrocarbon wax (303). The amidoamine made from lauric acid [143-07-7] and DETA mono- and bis(2-ethylhexyl) phosphate is a very effective water-in-od emulsifier (304). 

H-Benzimidazole, 2,2-pentamethylene-reduction, 5, 423 Benzimidazole-2-carbaldehyde oximes, 5, 436 Benzimidazolecarbaldehydes oxidation, 5, 437 Benzimidazole-2-carbamates 5-substituted as anthelmintics, 1, 202 Benzimidazole-1-carboxylic acid, 2-amino-methyl ester reactions, 5, 453... 

The Dim ester was developed for the protection of the carboxyl function during peptide synthesis. It is prepared by transesterification of amino acid methyl esters with 2-(hydroxymethyl)-l,3-dithiane and Al(/-PrO)3 (reflux, 4 h, 75°, 12 torr, 75% yield). It is removed by oxidation [H2O2, (NH4)2Mo04 pH 8, H2O, 60 min, 83% yield]. Since it must be removed by oxidation it is not compatible with.sulfur-containing amino acids such as cysteine and methionine. Its suitability for other, easily oxidized amino acids (e.g., tyrosine and tryptophan) must also be questioned. It is stable to CF3CO2H and HCl/ether. - ... 

Ketohydroxycassanic acid, C20H32O4, has also been used for another mode of degradation by Ruzicka, Dalma and Scott (1941). On oxidation by chromic acid in acetic acid it yields diketocassanic acid, C20H30O4, m.p. 225°, [a]u ° — 44° (EtOH), which forms a methyl ester, m.p. 108°, (EtOH), and is reduced by sodium amyloxide at 220° to cassanic acid, C20H34O2, m.p. 224°, [a]f - - 3° (CHCI3), which on selenium dehydrogenation also yields 1 7 8-trimethylphenanthrene. 

---