Organic coatings paint apphcation

Many similar hydrocarbon duids such as kerosene and other paraffinic and naphthenic mineral oils and vegetable oils such as linseed oil [8001-26-17, com oil, soybean oil [8001-22-7] peanut oil, tall oil [8000-26-4] and castor oil are used as defoamers. Liquid fatty alcohols, acids and esters from other sources and poly(alkylene oxide) derivatives of oils such as ethoxylated rosin oil [68140-17-0] are also used. Organic phosphates (6), such as tributyl phosphate, are valuable defoamers and have particular utiHty in latex paint appHcations. Another important class of hydrocarbon-based defoamer is the acetylenic glycols (7), such as 2,4,7,9-tetramethyl-5-decyne-4,7-diol which are widely used in water-based coatings, agricultural chemicals, and other areas where excellent wetting is needed. 

A varnish is often appHed on top of the paint layers. A varnish serves two purposes as a protective coating and also for an optical effect that enriches the colors of the painting. A traditional varnish consists of a natural plant resin dissolved or fused in a Hquid for appHcation to the surface (see Resins, natural). There are two types of varnish resins hard ones, the most important of which is copal, and soft ones, notably dammar and mastic. The hard resins are fossil, and to convert these to a fluid state, they are fused in oil at high temperature. The soft resins dissolve in organic solvents, eg, turpentine. The natural resin varnishes discolor over time and also become less soluble, making removal in case of failure more difficult (see Paint and FINNISH removers). Thus the use of more stable synthetic resins, such as certain methacrylates and cycHc ketone resins, has become quite common, especially in conservation practice. 

Hazing. Loss of gloss after drying. It is usually caused by apphcation of a gloss paint on a groimd coat that has not hardened sufficiently or excess driers in the final coat or partial solution of organic pigments in the paint. 

Coating organic polymer films with lecithin can improve the release properties of the film from the crimp jaws of the automated packaging machine (441). In analytical equipment, lecithin is used to improve the wettability of the contact surface, which enables the solvent to be presented uniformly for analysis (442). Incorporation of lecithin in a masking application can reduce bubble formation and improve the uniformity of the apphcation (443). And finally, lecithin can be used as a protective coating for a painted surface such as found on automobiles. Once applied, it facilitates the removal of insects and debris. The coating is resistant to rain and washing away (444). 

The same principles that are used in selecting a silane for reinforced plastics are used to select a silane for paints, inks, coatings, and adhesives (PICA). The chemical nature of the organic material used in the apphcation is the major criterion that governs the effectiveness of a particular coupling agent as an adhesion promoter. 

---