Nitrogen isocyanate

The cyclic carbamate (oxazoIidin-2-one) 313 is formed by the reaction of phenyl isocyanate (312) with vinyloxirane[I92]. Nitrogen serves as a nucleophile and attacks the carbon vicinal to the oxygen exclusively. The thermodynamically less stable Z-isomer 315 was obtained as a major product (10 I) by the reaction of 2-methoxy-l-naphthyI isocyanate (314) with a vinyloxir-... 

Treatment of 2-imino-3-phenyl-4-amino-(5-amido)-4-thiazoline with isocyanates or isothiocyanates yields the expected product (139) resulting from attack of the exocyclic nitrogen on the electrophilic center (276). Since 139 may be acetylated to thiazolo[4,5-d]pyrimidine-7-ones or 7-thiones (140). this reaction provides a route to condensed he erocycles (Scheme 92). 

Formamidinoyl isothiocyanates (157) combine with 2-aminothiazoles the ring nitrogen attacks the spC part of the electrophilic reagent (312) further reaction then yields aza-condensed thiazolo-s-triazines (158) (Scheme 99) (313). Mesoionic S-alkvlthiazolo[3.2-fl]-i-tria2ine-5,7-diones (159) are obtained when 2-alkylaminothiazoles react with phenoxycar-bonyl isocyanate (304). 

Although acetonitrile is one of the more stable nitriles, it undergoes typical nitrile reactions and is used to produce many types of nitrogen-containing compounds, eg, amides (15), amines (16,17) higher molecular weight mono- and dinitriles (18,19) halogenated nitriles (20) ketones (21) isocyanates (22) heterocycles, eg, pyridines (23), and imidazolines (24). It can be trimerized to. f-trimethyltriazine (25) and has been telomerized with ethylene (26) and copolymerized with a-epoxides (27). 

Further reaction of the active hydrogens on nitrogen in the urethane groups (3) can occur with additional isocyanate (1) at higher temperatures to cause formation of aHophanate stmctures. The active hydrogens in urea groups can also react with additional isocyanate to form disubstituted ureas which can stiU further react with isocyanate to form biurets (13). 

Isocyanates are derivatives of isocyanic acid, HN=C=0, ia which alkyl or aryl groups, as weU as a host of other substrates, are direcdy linked to the NCO moiety via the nitrogen atom. StmcturaHy, isocyanates (imides of carbonic acid) are isomeric to cyanates, ROCMSI (nitriles of carbonic acid), and nitrile oxides, RCMSI—>0 (derivatives of carboxyUc acid). 

More convenient is the use of aryl a2ides which are readily converted into isocyanates upon heating in nonreactive solvents via the loss of nitrogen. The latter method is useful for the synthesis of isocyanates with additional substituents which could not be prepared with phosgene (20). 

A simpler nonphosgene process for the manufacture of isocyanates consists of the reaction of amines with carbon dioxide in the presence of an aprotic organic solvent and a nitrogeneous base. The corresponding ammonium carbamate is treated with a dehydrating agent. This concept has been apphed to the synthesis of aromatic and aUphatic isocyanates. The process rehes on the facile formation of amine—carbon dioxide salts using acid haUdes such as phosphoryl chloride [10025-87-3] and thionyl chloride [7719-09-7] (30). 

Tertiary amines have been shown to react with isocyanates ia an analogous fashion to form ureas (41—43). Similarly, a2iridines (three-membered rings containing nitrogen) are found to react with isocyanates to yield cycHc ureas. Tertiary amines have also been shown to form labile dipolar 1 1 adducts with isocyanates reminiscent of salt formation. In contrast, formaldehyde acetal aminals form iasertion products with sulfonyl isocyanates (44,45). 

Gycloaddition Reactions. Isocyanates undergo cyclo additions across the carbon—nitrogen double bond with a variety of unsaturated substrates. Addition across the C=0 bond is less common. The propensity of isocyanates to undergo cycli2ation reactions has been widely explored for the synthesis of heterocycHc systems. Substrates with C=0, C=N, C=S, and C=C bonds have been found to yield either 2 + 2, 2 + 2 + 2, or 2 + 4 cycloadducts or a variety of secondary reaction products (2). 

The most overlooked hazard and contaminant is water (99). Water reacts with isocyanates at room temperature to yield both ureas and large quantities of carbon dioxide. The presence of water or moisture can produce a sufficient amount of CO2 to overpressurize and mpture containers. As Httle as 30 mL of water can result in 40 L of carbon dioxide which could result in pressures of up to 300 kPa (40 psi). For these reasons, the use of dry nitrogen atmospheres is recommended during handling. If a plant air system must be used, purification equipment, such as oil traps and drying beds, should be installed between the source and the isocyanate vessel. 

Phosgene reacts with a multitude of nitrogen, oxygen, sulfur, and carbon centers. Reaction with primary alkyl and aryl amines yield carbamoyl chlorides which are readily dehydrohalogenated to isocyanates. Secondary amines also form carbamoyl chlorides. 

Chemical Properties The formation of salts with acids is the most characteristic reaction of amines. Since the amines are soluble in organic solvents and the salts are usually not soluble, acidic products can be conveniendy separated by the reaction with an amine, the unshared electron pair on the amine nitrogen acting as proton acceptor. Amines are good nucleophiles reactions of amines at the nitrogen atom have as a first step the formation of a bond with the unshared electron pair of nitrogen, eg, reactions with acid anhydrides, haUdes, and esters, with carbon dioxide or carbon disulfide, and with isocyanic or isothiocyanic acid derivatives. 

Liquid cycloahphatic amines and diamines have exacting purity and color standards. Almost all are sold to specification, not performance standards. Use as isocyanate precursors requites low water content criteria for these hygroscopic fluids, hence nitrogen blanketing is often specified for product sampling as well as storage and transport. 

Ammonia is used in the fibers and plastic industry as the source of nitrogen for the production of caprolactam, the monomer for nylon 6. Oxidation of propylene with ammonia gives acrylonitrile (qv), used for the manufacture of acryHc fibers, resins, and elastomers. Hexamethylenetetramine (HMTA), produced from ammonia and formaldehyde, is used in the manufacture of phenoHc thermosetting resins (see Phenolic resins). Toluene 2,4-cHisocyanate (TDI), employed in the production of polyurethane foam, indirectly consumes ammonia because nitric acid is a raw material in the TDI manufacturing process (see Amines Isocyanates). Urea, which is produced from ammonia, is used in the manufacture of urea—formaldehyde synthetic resins (see Amino resins). Melamine is produced by polymerization of dicyanodiamine and high pressure, high temperature pyrolysis of urea, both in the presence of ammonia (see Cyanamides). 

The nitrogen of aHphatic and aromatic amines is alkylated rapidly by alkyl sulfates yielding the usual mixtures. Most tertiary amines and nitrogen heterocycles are converted to quaternary ammonium salts, unless the nitrogen is of very low basicity, eg, ia tn phenylamine. The position of dimethyl sulfate-produced methylation of several heterocycles with more than one heteroatom has been examined (22). Acyl cyanamides can be methylated (23). Metal cyanates are converted to methyl isocyanate or ethyl isocyanate ia high yields by heating the mixtures (24,25). 

Polyurethane Formation. The key to the manufacture of polyurethanes is the unique reactivity of the heterocumulene groups in diisocyanates toward nucleophilic additions. The polarization of the isocyanate group enhances the addition across the carbon—nitrogen double bond, which allows rapid formation of addition polymers from diisocyanates and macroglycols. 

Azoles containing a free NH group react comparatively readily with acyl halides. N-Acyl-pyrazoles, -imidazoles, etc. can be prepared by reaction sequences of either type (66) -> (67) or type (70)->(71) or (72). Such reactions have been carried out with benzoyl halides, sulfonyl halides, isocyanates, isothiocyanates and chloroformates. Reactions occur under Schotten-Baumann conditions or in inert solvents. When two isomeric products could result, only the thermodynamically stable one is usually obtained because the acylation reactions are reversible and the products interconvert readily. Thus benzotriazole forms 1-acyl derivatives (99) which preserve the Kekule resonance of the benzene ring and are therefore more stable than the isomeric 2-acyl derivatives. Acylation of pyrazoles also usually gives the more stable isomer as the sole product (66AHCi6)347). The imidazole-catalyzed hydrolysis of esters can be classified as an electrophilic attack on the multiply bonded imidazole nitrogen. 

The 27T-electrons of the carbon-nitrogen double bond of 1-azirines can participate in thermal symmetry-allowed [4 + 2] cycloadditions with a variety of substrates such as cyclo-pentadienones, isobenzofurans, triazines and tetrazines 71AHC(13)45). Cycloadditions also occur with heterocumulenes such as ketenes, ketenimines, isocyanates and carbon disulfide. It is also possible for the 27r-electrons of 1-azirines to participate in ene reactions 73HCA1351). 

Acylations were often carried out with diaziridines. Twofold acylation is normally observed when two NH groups are present. Most acylations were performed with benzoyl chloride, acetyl chloride or phenyl isocyanate (B-67MI50800). Ring opening reactions during acylation, foreseeable for intermediates of electrophilic attack on nitrogen, were observed only seldom, provided mild conditions were used. 

A-Carbamoyldiaziridines can open the three-membered ring and recyclize through the carbamoyl nitrogen, as demonstrated in a benzoyl isocyanate adduct (74JOC3198) and in the formation of (140) (79JOC3935). 

H-Bond Acceptor (HBA) Acyl chlorides Acyl fluorides Hetero nitrogen aromatics Hetero oj gen aromatics Tertiary amides Tertiary amines Other nitriles Other nitros Isocyanates Peroxides Aldehydes Anhydrides Cyclo ketones Ahphatic ketones Esters Ethers Aromatic esters Aromatic nitriles Aromatic ethers Sulfones Sulfolanes... 

The polymer may be prepared by running the isocyanate into the glycol while the temperature is raised slowly to near 200°C. The reaction is exothermic and carried out under a blanket of nitrogen. The polymers produced have a molecular weight of 10000-15 000 and after filtration may be melt spun into fibres. 

Inhaled gaseous compounds are absorbed in all parts of the respiratory system whereas particle size determines how deep into the airways the parti cles will he transported in the airstrearn. Shortness of breath is a typical sign of a chemical exposure that has affected the lungs, and it may be evoked through iminunological mechanisms (e.g., formaldehyde, ethyleneoxide), or through toxic irritation (formaldehyde, isocyanates, sulfur dioxide, nitrogen dioxide, Frequently the mechanism depends on the concentration ol the com... 

Compounds that induce bronchoconstriction include tobacco smoke, formaldehyde, and diethyl ether. Several other compounds, such as acidic fumes (e.g., sulfuric acid) and gases, such as ozone and nitrogen dioxide, as well as isocyanates, can cause bronchoconstriction. Also, cellular damage in the airways induces bronchoconstriction because of the release of vasoactive compounds. Frequently, different mechanisms work at the same time, provoking bronchoconstriction and increased secretion of mucus, both of which interfere with respiration. 

Iodine isocyanate was used to synthesize the first steroidal aziridine, 2, 3 -iminocholestane (95). from 5a-cholest-2-ene (91). This reaction sequence which is believed to proceed through a three-membered ring iodonium ion (92) illustrates the limitation of pseudohalogen additions for the synthesis of -aziridines. The iodonium complex forms from the least hindered side (usually alpha) and is opened tmK5-diaxially to give a -oriented nitrogen function. The 3a-iodo-2 -isocyanate (93) is converted by treatment with... 

Proof that the second mole of phenyl isocyanate did not react at the nitrogen of 160 was provided by the reaction of the enamine from 2-methylcyclo-hexanone, which gave only the monocarboxanilide on reaction with excess phenyl isocyanate. 

The rate of addition of isocyanates to enamines increases with decreasing basicity of the isocyanate nitrogen and with increasing basicity of the enamine nitrogen 112). 

The addition of phenylisocyanate to aldehyde-derived enamines resulted in the formation of aminobutyrolactams (438,439). As aminal derivatives these produets can be hydrolyzed to the linear aldehyde amides and thus furnish a route to derivatives of the synthetically valuable malonaldehyde-acid system. With this class of reactions, a second acylation on nitrogen becomes possible and the six-membered cyclization products have been reported (440). Closely related to the reactions of enamines with isocyanates is the condensation of cyclohexanone with urea in base (441). 

---