Nickel reaction with

Fortunately, in the presence of excess copper(II)nitrate, the elimination reaction is an order of magnitude slower than the desired Diels-Alder reaction with cyclopentadiene, so that upon addition of an excess of cyclopentadiene and copper(II)nitrate, 4.51 is converted smoothly into copper complex 4.53. Removal of the copper ions by treatment with an aqueous EDTA solution afforded in 71% yield crude Diels-Alder adduct 4.54. Catalysis of the Diels-Alder reaction by nickel(II)nitrate is also... 

Reactions with Ammonia and Amines. Acetaldehyde readily adds ammonia to form acetaldehyde—ammonia. Diethyl amine [109-87-7] is obtained when acetaldehyde is added to a saturated aqueous or alcohoHc solution of ammonia and the mixture is heated to 50—75°C in the presence of a nickel catalyst and hydrogen at 1.2 MPa (12 atm). Pyridine [110-86-1] and pyridine derivatives are made from paraldehyde and aqueous ammonia in the presence of a catalyst at elevated temperatures (62) acetaldehyde may also be used but the yields of pyridine are generally lower than when paraldehyde is the starting material. The vapor-phase reaction of formaldehyde, acetaldehyde, and ammonia at 360°C over oxide catalyst was studied a 49% yield of pyridine and picolines was obtained using an activated siHca—alumina catalyst (63). Brown polymers result when acetaldehyde reacts with ammonia or amines at a pH of 6—7 and temperature of 3—25°C (64). Primary amines and acetaldehyde condense to give Schiff bases CH2CH=NR. The Schiff base reverts to the starting materials in the presence of acids. 

Acetylene-Based Routes. Walter Reppe, the father of modem acetylene chemistry, discovered the reaction of nickel carbonyl with acetylene and water or alcohols to give acryUc acid or esters (75,76). This discovery led to several processes which have been in commercial use. The original Reppe reaction requires a stoichiometric ratio of nickel carbonyl to acetylene. The Rohm and Haas modified or semicatalytic process provides 60—80% of the carbon monoxide from a separate carbon monoxide feed and the remainder from nickel carbonyl (77—78). The reactions for the synthesis of ethyl acrylate are... 

Reactions With Metals. AH metals react to some extent with the halogen fluorides, although several react only superficiaHy to form an adherent fluoride film of low permeabHity that serves as protection against further reaction. This protective capacity is lost at elevated temperatures, however. Hence, each metal has a temperature above which it continues to react. Mild steel reacts rapidly above 250°C. Copper and nickel lose the abHity to resist reaction above 400 and 750°C, respectively. 

Nickel Carbonyl The extremely toxic gas nickel carbonyl can be detected at 0.01 ppb by measuring its chemiluminescent reaction with ozone in the presence of carbon monoxide. The reaction produces excited nickel(II) oxide by a chain process which generates many photons from each pollutant molecule to permit high sensitivity (315). 

In the acid-leaching process, the oxide ore is leached with sulfuric acid at elevated temperature and pressure, which causes nickel, but not iron, to enter into solution. The leach solution is purified, foHowed by reaction with hydrogen sulfide and subsequent precipitation of nickel and cobalt sulfides. 

Nickel chloride hexahydrate [7791-20-0] is formed by the reaction of nickel powder or nickel oxide with a hot mixture of water and HCl. Nickel duoride [13940-83-5], 4H2O, is prepared by the reaction of hydroduoric acid on nickel carbonate. Nickel bromide [18721 -96-5], NiBr2 6H20, is made... 

Nickel Sulfamate. Nickel sulfamate [13770-89-3] Ni(S02NH2)2 4H2O, commonly is used as an electrolyte ia nickel electroforming systems, where low stress deposits are required. As a crystalline entity for commercial purposes, nickel sulfamate never is isolated from its reaction mixture. It is prepared by the reaction of fine nickel powder or black nickel oxide with sulfamic acid ia hot water solution. Care must be exercised ia its preparation, and the reaction should be completed rapidly because sulfamic acid hydrolyzes readily to form sulfuric acid (57). 

TC-Cyclopentadienyl Nickel Complexes. Nickel bromide dimethoxyethane [29823-39-9] forms bis(cydopentadienyl)nickel [1271 -28-9] upon reaction with sodium cyclopentadienide (63). This complex, known as nickelocene, 7T-(C3H3)2Ni, is an emerald-green crystalline sandwich compound, mp 173°C, density 1.47 g/cm. It is paramagnetic and slowly oxidi2es in air. A number of derivatives of nickelocene are known, eg, methylnickelocene [1292-95-4], which is green and has mp 37°C, and bis( 7t-indenyl)nickel [52409-46-8], which is red, mp 150°C (87,88). 

The zwitterion (6) can react with protic solvents to produce a variety of products. Reaction with water yields a transient hydroperoxy alcohol (10) that can dehydrate to a carboxyUc acid or spHt out H2O2 to form a carbonyl compound (aldehyde or ketone, R2CO). In alcohoHc media, the product is an isolable hydroperoxy ether (11) that can be hydrolyzed or reduced (with (CH O) or (CH2)2S) to a carbonyl compound. Reductive amination of (11) over Raney nickel produces amides and amines (64). Reaction of the zwitterion with a carboxyUc acid to form a hydroperoxy ester (12) is commercially important because it can be oxidized to other acids, RCOOH and R COOH. Reaction of zwitterion with HCN produces a-hydroxy nitriles that can be hydrolyzed to a-hydroxy carboxyUc acids. Carboxylates are obtained with H2O2/OH (65). The zwitterion can be reduced during the course of the reaction by tetracyanoethylene to produce its epoxide (66). 

Another significant use of 3-methylphenol is in the production of herbicides and insecticides. 2-/ f2 -Butyl-5-methylphenol is converted to the dinitro acetate derivative, 2-/ f2 -butyl-5-methyl-4,6-dinitrophenyl acetate [2487-01 -6] which is used as both a pre- and postemergent herbicide to control broad leaf weeds (42). Carbamate derivatives of 3-methylphenol based compounds are used as insecticides. The condensation of 3-methylphenol with formaldehyde yields a curable phenoHc resin. Since 3-methylphenol is trifunctional with respect to its reaction with formaldehyde, it is possible to form a thermosetting resin by the reaction of a prepolymer with paraformaldehyde or other suitable formaldehyde sources. 3-Methylphenol is also used in the production of fragrances and flavors. It is reduced with hydrogen under nickel catalysis and the corresponding esters are used as synthetic musk (see Table 3). 

Manufacture. Ethyl chloride undergoes reaction with alkah cellulose in high pressure nickel-clad autoclaves. A large excess of sodium hydroxide and ethyl chloride and high reaction temperatures (up to 140°C) are needed to drive the reaction to the desked high DS values (>2.0). In the absence of a diluent, reaction efficiencies in ethyl chloride range between 20 and 30%, the majority of the rest being consumed to ethanol and diethyl ether by-products. 

Reaction with hydrogen at 220°C in the presence of reduced nickel catalyst results in total decomposition to hydrogen chloride and carbon. An explosive reaction occurs with butylUthium in petroleum ether solution (4). Tetrachloroethylene also reacts explosively with metallic potassium at its melting point, however it does not react with sodium (5). 

Dehalogenation of monochlorotoluenes can be readily effected with hydrogen and noble metal catalysts (34). Conversion of -chlorotoluene to Ncyanotoluene is accompHshed by reaction with tetraethyl ammonium cyanide and zero-valent Group (VIII) metal complexes, such as those of nickel or palladium (35). The reaction proceeds by initial oxidative addition of the aryl haHde to the zerovalent metal complex, followed by attack of cyanide ion on the metal and reductive elimination of the aryl cyanide. Methylstyrene is prepared from -chlorotoluene by a vinylation reaction using ethylene as the reagent and a catalyst derived from zinc, a triarylphosphine, and a nickel salt (36). 

Nickel additions reduce corrosion due to both caustic solutions and ammonia. Monel is resistant to attack in ammonia-containing waters and vapors. Reactions with ammonia are as follows ... 

R indicates the organic portion of the resin and SO3 is the immobile portion of the ion active group. Two resin sites are needed for nickel ions with a plus 2 valence (Ni ). Trivalent ferric ions would require three resin sites. As shown, the ion exchange reaction is reversible. The degree the reaction proceeds to the right will depend on the resins preference, or selectivity, for nickel ions compared with its preference for hydrogen ions. The selectivity of a resin for a given ion is measured by the selectivity coefficient. K. which in its simplest form for the reaction... 

The azidohydrins obtained by azide ion opening of epoxides, except for those possessing a tertiary hydroxy group, can be readily converted to azido mesylates on treatment with pyridine/methanesulfonyl chloride. Reduction and subsequent aziridine formation results upon reaction with hydrazine/ Raney nickel, lithium aluminum hydride, or sodium borohydride/cobalt(II)... 

---