Nickel complexes addition with

The benzoylhydrazone of benzaldehyde (57) is oxidatively cyclized at the nickel hydroxide electrode (0.1 M NaOH, 30% t-butanol 70 % water) to the oxadiazole 58, however in only moderate yield (22%). Main product is benzoic acid (59) (60%) additionally a nickel complex (14%) with the probable structure 60 is found (Eq. (17)) . With nickel peroxide in chloroform 30% 58 and 47% 60 are obtained... 

Catalytic Enantioselective Conjugate Addition of Dialkylzincs to Enones. A chiral nickel complex modified with DBNE and an achiral ligand such as 2,2 -bipyridyl in acetonitrile/toluene is an highly enantioselective catalyst for the addition of dialkylzincs to enones. p-Substituted ketones with up to 90% ee are obtained (eq 23). The method is the first highly enantioselective catalytic conjugate addition of an oiganometallic reagent to an enone. 

As described before, nickel complexes react with aldehydes stoichiometri-cally. In view of the fact that aldehydes may undergo oxidative addition to palladium complexes, it is rather peculiar that ketones are not formed via oxidative addition. (This reaction will be discussed again in Chapt. V.)... 

The nickel complex 11, with a fluorous Schiff base as ligand, was prepared from salicylaldehyde and 4-perfluorodecylaniline (Scheme 15). This fluorous Ni complex was used as a catalyst for the conjugate addition of -diketones to diethyl azodicarboxylate (DEAD). The mixture was stirred at 60 C in a mixture of... 

Aqueous ammonia can also behave as a weak base giving hydroxide ions in solution. However, addition of aqueous ammonia to a solution of a cation which normally forms an insoluble hydroxide may not always precipitate the latter, because (a) the ammonia may form a complex ammine with the cation and (b) because the concentration of hydroxide ions available in aqueous ammonia may be insufficient to exceed the solubility product of the cation hydroxide. Effects (a) and (b) may operate simultaneously. The hydroxyl ion concentration of aqueous ammonia can be further reduced by the addition of ammonium chloride hence this mixture can be used to precipitate the hydroxides of, for example, aluminium and chrom-ium(III) but not nickel(II) or cobalt(II). 

Perfluoroalkyl or -aryl halides undergo oxidative addition with metal vapors to form nonsolvated fluonnated organometallic halides and this topic has been die subject of a review [289] Pentafluorophenyl halides react with Rieke nickel, cobalt, and iron to give bispentafluorophenylmetal compounds, which can be isolated in good yields as liquid complexes [290] Rieke nickel can also be used to promote the reaction of pentafluorophenyl halides with acid halides [297] (equation 193)... 

Nickel is also widely used as an electrodeposited underlay to chromium on chromium-plated articles, reinforcing the protection against corrosion provided by the thin chromium surface layer. Additionally the production of articles of complex shape to close dimensional tolerances in nickel by electroforming —a high-speed electrodeposition process —has attracted considerable interest. Electrodeposition of nickel and the properties of electro-deposited coatings containing nickel are dealt with in greater detail in Section 14.7. 

Pipette 25 mL nickel solution (0.01 M) into a conical flask and dilute to 100mL with de-ionised water. Add the solid indicator mixture (50mg) and 10 mL of the 1M ammonium chloride solution, and then add concentrated ammonia solution dropwise until the pH is about 7 as shown by the yellow colour of the solution. Titrate with standard (0.01 M) EDTA solution until the end point is approached, then render the solution strongly alkaline by the addition of 10 mL of concentrated ammonia solution, and continue the titration until the colour changes from yellow to violet. The pH of the final solution must be 10 at lower pH values an orange-yellow colour develops and more ammonia solution must be added until the colour is clear yellow. Nickel complexes rather slowly with EDTA, and consequently the EDTA solution must be added dropwise near the end point. 

As was the case for the Ni (123) and Pd/C2H4 (140) systems, each of the binary olefin complexes isolated has associated with it a moderately intense, UV band, the bands for Pd complexes lying at higher energy than those of the nickel complexes in addition, for each olefin sys-... 

In the reaction of Ni(CNBu )4 and methyl iodide oligomerization of the isocyanide was observed the only isolable nickel complex was (I), shown below. This product is believed to arise through sequential insertions of three isocyanides into a nickel-carbon bond. Upon further treatment with additional isocyanide at a temperature greater than 60° C one obtains a polymer (RNC) presumably through multiple isocyanide insertion reactions. The addition of benzoyl chloride to Ni(CNBu )4 gave two isolable compounds Ni(CNBu )3(COPh)Cl (74%) and (II) (8.2%). This latter reaction, and the isolation of (II) in particular, suggests that the proposed mechanism for polymerization of isocyanides is reasonable. 

Nickel complexes formed in situ by the reaction of NiCl.S-COD) with the iini-dazolium salts IMesHCl or IPrHCl in the presence KO Bu catalyse the hydrosilylation of internal or terminal alkynes with EtjSiH. Interestingly, Ni tri-butylphosphine complexes are inactive in this hydrosilylation reaction. The monosilylated addition products were obtained with slow addition rates of the alkyne in the reaction mixture and were formed with variable degree of stereoselectivity, depending on the type of the alkyne, the silane and the ligand on Ni [50],... 

Pyridine compounds 45 can also be produced by the NHC-Ni catalysed cycloaddition between nitriles 43 and diynes 44 (Scheme 5.13) [16]. The SIPr carbene was found to be the best ligand for the nickel complex in this reaction. The reaction required mild reaction conditions and low catalyst loadings, as in the case of cycloaddition of carbon dioxide. In addition to tethered aUcynes (i.e. diynes), pyridines were prepared from a 3-component coupling reaction with 43 and 3-hexyne 23 (Scheme 5.13). The reaction of diynes 44 and nitriles 43 was also catalysed by a combination of [Ni(COD)J, NHC salts and "BuLi, which generates the NHC-Ni catalyst in situ. The pyridines 45 were obtained with comparable... 

By oxidative addition of aryl sulphides to low-valent nickel complexes, a C—S bond cleavage occurs to form Ni11 thiolate complexes. For example, exposure of diaryl sulphides to [(But3P)3Ni0] leads to oxidative addition, with nickel inserting into the C—S bond (280).814... 

Low-valent nickel complexes of bpy are also efficient electrocatalysts in the reductive coupling reaction of aromatic halides.207 Detailed investigations are in agreement with a reaction mechanism involving the oxidative addition (Equation (40)) of the organic halide to a zero valent complex.208-210 Starting from [Nin(bpy)2(X)2]0 with excess bpy, or from [Nin(bpy)3]2 +, results in the [Ni°(bpy)2]° complex (Equations (37) and (38)). However, the reactive complex is the... 

It is generally assumed that the Lewis acid in 3 decreases the charge on the metal, i.e., increases its electrophilicity. The removal of charge from the nickel allows additional electron donors to coordinate to the nickel atom, and reaction with, for example, 2 moles of carbon monoxide or 1 mole of 1,5-cyclooctadiene (COD) gives the insoluble, catalytically inactive and presumably ionic complexes 7 and 8. In contrast, 7r-allyl-nickel halides (1) add only 1 mole of carbon monoxide while they do not react with COD (52). 

The following conclusions can be drawn (a) ir-Allylnickel compounds are probably not involved in the catalytic dimerization of cyclooctene, because the highest reaction rate occurs when only traces of these compounds can be detected further, the concentration of the new 7r-allyl-nickel compound (19) becomes significant only after the catalytic reaction has ceased, (b) The complex formed between the original 7r-allylnickel compound (11) and the Lewis acid is transformed immediately upon addition of cyclooctene to the catalytically active nickel complex or complexes. In contrast to 7r-allylnickel compounds, this species decomposes to give metallic nickel on treatment of the catalyst solution with ammonia, (c) The transformation of the catalytically active nickel complex to the more stable 7r-allylnickel complex occurs parallel with the catalytic dimerization reaction. This process is obviously of importance in stabilizing the catalyst system in the absence of reactive olefins. In... 

Among transition metal complexes used as catalysts for reactions of the above-mentioned types b and c, the most versatile are nickel complexes. The characteristic reactions of butadiene catalyzed by nickel complexes are cyclizations. Formations of 1,5-cyclooctadiene (COD) (1) and 1,5,9-cyclododecatriene (CDT) (2) are typical reactions (2-9). In addition, other cyclic compounds (3-6) shown below are formed by nickel catalysts. Considerable selectivity to form one of these cyclic oligomers as a main product by modification of the catalytic species with different phosphine or phosphite as ligands has been observed (3, 4). 

Linear oligomerization and telomerization of butadiene take place with nickel complexes in the presence of a proton source (7). In addition, cooligomerization of butadiene with functionalized olefins such as methacrylate is catalyzed by nickel complexes [Eq. (4)] (12, 13) ... 

---