Multicomponent system models

Sheindorf, C., Rebhun, M., and Sheintuch, M. Organic pollutants adsorption from multicomponent systems modeled by Freundlich type isotherm. Water Res., 16(3) 357-362, 1982. 

The primary purpose for expressing experimental data through model equations is to obtain a representation that can be used confidently for systematic interpolations and extrapolations, especially to multicomponent systems. The confidence placed in the calculations depends on the confidence placed in the data and in the model. Therefore, the method of parameter estimation should also provide measures of reliability for the calculated results. This reliability depends on the uncertainties in the parameters, which, with the statistical method of data reduction used here, are estimated from the parameter variance-covariance matrix. This matrix is obtained as a last step in the iterative calculation of the parameters. 

Adsorption of Mixtures. The Langmuit model can be easily extended to binary or multicomponent systems ... 

Distillation Columns. Distillation is by far the most common separation technique in the chemical process industries. Tray and packed columns are employed as strippers, absorbers, and their combinations in a wide range of diverse appHcations. Although the components to be separated and distillation equipment may be different, the mathematical model of the material and energy balances and of the vapor—Hquid equiUbria are similar and equally appHcable to all distillation operations. Computation of multicomponent systems are extremely complex. Computers, right from their eadiest avadabihties, have been used for making plate-to-plate calculations. 

The most recendy developed model is called UNIQUAC (21). Comparisons of measured VLE and predicted values from the Van Laar, Wilson, NRTL, and UNIQUAC models, as well as an older model, are available (3,22). Thousands of comparisons have been made, and Reference 3, which covers the Dortmund Data Base, available for purchase and use with standard computers, should be consulted by anyone considering the measurement or prediction of VLE. The predictive VLE models can be accommodated to multicomponent systems through the use of certain combining rules. These rules require the determination of parameters for all possible binary pairs in the multicomponent mixture. It is possible to use more than one model in determining binary pair data for a given mixture (23). 

The local-composition models have hmited flexibility in the fitting of data, but they are adequate for most engineering purposes. Moreover, they are implicitly generalizable to multicomponent systems without the introduction of any parameters beyond those required to describe the constituent binaiy systems. For example, the Wilson equation for multicomponent systems is written ... 

Tersoff, J., Modeling Solid-State Chemistry Interatomic Potentials for Multicomponent Systems," Phys. Rev. B, Vol. 39, No. 8,1989, pp. 5566-5568. 

Presently it is not possible to relax the Cu lattice at the SCF level, since from a computational point of view it is composed of two different kinds of Cu atoms (those with and without the ECP). Also questions of wetting, i.e. whether the chemisorbed Be4 would prefer to remain as a tetrahedron (or distorted tetrahedron) or to spread out to a single layer are still not amenable to ab initio study. These questions have not yet been investigated using the parameterized model approach, because of the problems associated with modeling Be2 and Beg as accurately as larger Be clusters. Nonetheless, these preliminary results show that the parameterized and ab initio calculations can be used to complement each other in a multicomponent system, just as for single component systems. 

Here va and va are the stoichiometric coefficients for the reaction. The formulation is easily extended to treat a set of coupled chemical reactions. Reactive MPC dynamics again consists of free streaming and collisions, which take place at discrete times x. We partition the system into cells in order to carry out the reactive multiparticle collisions. The partition of the multicomponent system into collision cells is shown schematically in Fig. 7. In each cell, independently of the other cells, reactive and nonreactive collisions occur at times x. The nonreactive collisions can be carried out as described earlier for multi-component systems. The reactive collisions occur by birth-death stochastic rules. Such rules can be constructed to conserve mass, momentum, and energy. This is especially useful for coupling reactions to fluid flow. The reactive collision model can also be applied to far-from-equilibrium situations, where certain species are held fixed by constraints. In this case conservation laws... 

The above iso-pH measurements are based on the 2% DOPC/dodecane system (model 1.0 over pH 3-10 range). Another membrane model was also explored by us. Table 7.16 lists iso-pH effective permeability measurements using the soy lecithin (20% wt/vol in dodecane) membrane PAMPA (models 17.1, 24.1, and 25.1) The negative membrane charge, the multicomponent phospholipid mixture, and the acceptor sink condition (Table 7.1) result in different intrinsic permeabilities for the probe molecules. Figure 7.40 shows the relationship between the 2% DOPC and the 20% soy iso-pH PAMPA systems for ketoprofen. Since the intrinsic permeability of ketoprofen in the soy lecithin membrane is about 20 times greater than in DOPC membrane, the flat diffusion-limited transport region of the log Pe... 

Although the methods developed here can be used to predict liquid-liquid equilibrium, the predictions will only be as good as the coefficients used in the activity coefficient model. Such predictions can be critical when designing liquid-liquid separation systems. When predicting liquid-liquid equilibrium, it is always better to use coefficients correlated from liquid-liquid equilibrium data, rather than coefficients based on the correlation of vapor-liquid equilibrium data. Equally well, when predicting vapor-liquid equilibrium, it is always better to use coefficients correlated to vapor-liquid equilibrium data, rather than coefficients based on the correlation of liquid-liquid equilibrium data. Also, when calculating liquid-liquid equilibrium with multicomponent systems, it is better to use multicomponent experimental data, rather than binary data. 

Multicomponent systems of the kind shown in Fig. 6.16b can be calibrated with a high degree of reliability when the preconditions mentioned above are valid. The uncertainties e, contain both deviations from the model and random errors. 

Selectivity. In general, selectivity of analytical multicomponent systems can be expressed qualitatively (Vessman et al. [2001]) and estimated quantitatively according to a statement of Kaiser [1972] and advanced models (Danzer [2001]). In multivariate calibration, selectivity is mostly quantified by the condition number see Eqs. (6.80)-(6.82). Unfortunately, the condition number does not consider the concentrations of the species and gives therefore only an aid to orientation of maximum expectable analytical errors. Inclusion of the concentrations of calibration standards into selectivity models makes it possible to derive multivariate limits of detection. 

Fowle and Fein (1999) measured the sorption of Cd, Cu, and Pb by B. subtilis and B. licheniformis using the batch technique with single or mixed metals and one or both bacterial species. The sorption parameters estimated from the model were in excellent agreement with those measured experimentally, indicating that chemical equilibrium modeling of aqueous metal sorption by bacterial surfaces could accurately predict the distribution of metals in complex multicomponent systems. Fein and Delea (1999) also tested the applicability of a chemical equilibrium approach to describing aqueous and surface complexation reactions in a Cd-EDTA-Z . subtilis system. The experimental values were consistent with those derived from chemical modeling. 

This model was shown to be applicable for describing moisture uptake kinetics (in vacuum) above RH0 for single-component systems of alkali halides, sugars, and choline salts [31]. The model later was extended to consider the moisture uptake kinetics above RH0 for multicomponent systems of these substances [33]. 

Having derived a set of equations describing the equilibrium state of a multicomponent system and devised a scheme for solving them, we can begin to model the chemistries of natural waters. In this chapter we construct four models, each posing special challenges, and look in detail at the meaning of the calculation results. 

Because it is based on chemical reactions, the double layer model can be integrated into the equations describing the equilibrium state of a multicomponent system, as developed in Chapter 3. The basis appears as before (Table 3.1),... 

A reactive transport model in a more general sense treats a multicomponent system in which a number of equilibrium and perhaps kinetic reactions occur at the same time. This problem requires more specialized solution techniques, a variety of which have been proposed and implemented (e.g., Yeh and Tripathi, 1989 Steefel and MacQuarrie, 1996). Of the techniques, the operator splitting method is best known and most commonly used. 

Cederberg, G. A., R. L. Street and J. O. Leckie, 1985, A groundwater mass transport and equilibrium chemistry model for multicomponent systems. Water Resources Research 21, 1095-1104. 

Separation systems include in their mathematical models various vapor-liquid equilibrium (VLE) correlations that are specific to the binary or multicomponent system of interest. Such correlations are usually obtained by fitting VLE data by least squares. The nature of the data can depend on the level of sophistication of the experimental work. In some cases it is only feasible to measure the total pressure of a system as a function of the liquid phase mole fraction (no vapor phase mole fraction data are available). 

Assuming the liquid phases remain immiscible, the modelling approach for multicomponent systems remains the same, except that it is now necessary to write additional component balance equations for each of the solutes present, as for the multistage extraction cascade with backmixing in Section 3.2.2. Thus for component j, the component balance equations become... 

The extension of the cell model to multicomponent systems of spherical molecules of similar size, carried out initially by Prigogine and Garikian1 in 1950 and subsequently continued by several authors,2-5 was an important step in the development of the statistical theory of mixtures. Not only could the excess free energy be calculated from this model in terms of molecular interactions, but also all other excess properties such as enthalpy, entropy, and volume could be calculated, a goal which had not been reached before by the theories of regular solutions developed by Hildebrand and Scott8 and Guggenheim.7... 

Mass transport models for multicomponent systems have been developed where the equilibrium interaction chemistry is solved independently of the mass transport equations which leads to a set of algebraic equations for the chemistry coupled to a set of differential equations for the mass transport. (Cederberg et al., 1985). 

---