Distillation equipment

Non-standard distillation equipment having up to 100 plates and operating at high reflux rates Is also used. The fractionation is very efficient and gives a precise distribution of boiling points. 

This was pretty simple and is well suited for someone without any distillation equipment ... 

Distillation Columns. Distillation is by far the most common separation technique in the chemical process industries. Tray and packed columns are employed as strippers, absorbers, and their combinations in a wide range of diverse appHcations. Although the components to be separated and distillation equipment may be different, the mathematical model of the material and energy balances and of the vapor—Hquid equiUbria are similar and equally appHcable to all distillation operations. Computation of multicomponent systems are extremely complex. Computers, right from their eadiest avadabihties, have been used for making plate-to-plate calculations. 

Corrosivity. Corrosivity is an important factor in the economics of distillation. Corrosion rates increase rapidly with temperature, and in distillation the separation is made at boiling temperatures. The boiling temperatures may require distillation equipment of expensive materials of constmction however, some of these corrosion-resistant materials are difficult to fabricate. For some materials, eg, ceramics (qv), random packings may be specified, and this has been a classical appHcation of packings for highly corrosive services. On the other hand, the extensive surface areas of metal packings may make these more susceptible to corrosion than plates. Again, cost may be the final arbiter (see Corrosion and corrosion control). 

Design Procedures The procedures to be followed in specifying the principal dimensions of gas absorption and distillation equipment are described in this section and are supported by several worked-out examples. The experimental data required for executing the designs are keyed to appropriate references or to other sections of the handbook. 

Batch distillation equipment can range from a free-standing column with a reboiler, condenser, receiver, and vacuum system, to the use of a jacketed reactor with a condenser. Distillation often involves the generation of combustible vapors in the process equipment. This necessitates the containment of the vapor within the equipment, and the exclusion of air from the equipment, to prevent the formation of combustible mixtures that could lead to fire or explosion. 

In addition to the distillation of crude oil coming into the refinery, stills of various designs are used in other types of service throughout the refinery. Cracked products are separated in distillation equipment which is very similar to an atmospheric crude pipe still. The principal difference is that these products are hot from the cracking operation, so that a fired heater is not required. 

Bameby Sutcliffe Site describes company providing activated carbon, air purification, solvent recovery, emission control, remediation, odor control, corrosive gas control, pollution control, air filterr, and distillation equipment. http //www.bscarbons.com... 

---