Molecular lipase

Chirazymes. These are commercially available enzymes e.g. lipases, esterases, that can be used for the preparation of a variety of optically active carboxylic acids, alcohols and amines. They can cause regio and stereospecific hydrolysis and do not require cofactors. Some can be used also for esterification or transesterification in neat organic solvents. The proteases, amidases and oxidases are obtained from bacteria or fungi, whereas esterases are from pig liver and thermophilic bacteria. For preparative work the enzymes are covalently bound to a carrier and do not therefore contaminate the reaction products. Chirazymes are available form Roche Molecular Biochemicals and are used without further purification. 

Molecular target Gastrointestinal lipases Serotonin and noradrenaline transporter Cannabinoid-1 receptor... 

Goldberg IJ, Merkel M Lipoprotein lipase physiology, biochemistry and molecular biology. Front Biosci 2001 6 D388. 

Holm C et al Molecular mechanisms regulating hormone sensitive lipase and lipolysis. Annu Rev Nutr 2000 20 365. 

Later, in a modification to the above system, we reported the use of an indenylruthenium complex 2 as a racemization catalyst for the DKR of secondary alcohols, which does not require ketones but a weak base hke triethylamine and molecular oxygen to be achvated. The DKR with 2 in combination with immobilized Pseudomonas cepacia lipase (PCL, trade name. Lipase PS-C ) was carried out at a lower temperature (60°C) and provided good yields and high optical purities (Table 2). This paved the way for the omission of ketones as... 

The catalytic alcohol racemization with diruthenium catalyst 1 is based on the reversible transfer hydrogenation mechanism. Meanwhile, the problem of ketone formation in the DKR of secondary alcohols with 1 was identified due to the liberation of molecular hydrogen. Then, we envisioned a novel asymmetric reductive acetylation of ketones to circumvent the problem of ketone formation (Scheme 6). A key factor of this process was the selection of hydrogen donors compatible with the DKR conditions. 2,6-Dimethyl-4-heptanol, which cannot be acylated by lipases, was chosen as a proper hydrogen donor. Asymmetric reductive acetylation of ketones was also possible under 1 atm hydrogen in ethyl acetate, which acted as acyl donor and solvent. Ethanol formation from ethyl acetate did not cause critical problem, and various ketones were successfully transformed into the corresponding chiral acetates (Table 17). However, reaction time (96 h) was unsatisfactory. 

Poly(malic acid) is a biodegradable and bioadsorbable water-soluble polyester having a carboxylic acid in the side chain. The chemoenzymatic synthesis of poly(malic acid) was achieved by the lipase-catalyzed polymerization of benzyl (3-malolactonate, followed by the debenzylation. The molecular weight of poly(benzyl (3-malolactonate) increased on copolymerizafion with a small amount of (3-PL using lipase CR catalyst. ... 

Five-membered unsubstituted lactone, y-butyrolactone (y-BL), is not polymerized by conventional chemical catalysts. However, oligomer formation from y-BL was observed by using PPL or Pseudomonas sp. lipase as catalyst. Enzymatic polymerization of six-membered lactones, 8-VL and l,4-dioxan-2-one, was reported. 8-VL was polymerized by various lipases of different origins. The molecular weight of the enzymatically obtained polymer was relatively low (less than 2000). 

In polyester synthesis via ring-opening polymerizations, metal catalysts are often used. For medical applications of polyesters, however, there has been concern about harmful effects of the metallic residues. Enzymatic synthesis of a metal-free polyester was demonstrated by the polymerization of l,4-dioxan-2-one using Candida antarctica lipase (lipase CA). Under appropriate reaction conditions, the high molecular weight polymer (molecular weight = 4.1 x 10" ) was obtained. 

Enzymatic synthesis of aliphatic polyesters was also achieved by the ringopening polymerization of cyclic diesters. Lactide was not enzymatically polymerized under mild reaction conditions however, poly(lacfic acid) with the molecular weight higher than 1 x 10" was formed using lipase BC as catalyst at higher temperatures (80-130°C). Protease (proteinase K) also induced the polymerization however, the catalytic activity was relatively low. 

Alkyl esters often show low reactivity for lipase-catalyzed transesterifications with alcohols. Therefore, it is difficult to obtain high molecular weight polyesters by lipase-catalyzed polycondensation of dialkyl esters with glycols. The molecular weight greatly improved by polymerization under vacuum to remove the formed alcohols, leading to a shift of equilibrium toward the product polymer the polyester with molecular weight of 2 x 10" was obtained by the lipase MM-catalyzed polymerization of sebacic acid and 1,4-butanediol in diphenyl ether or veratrole under reduced pressure. ... 

The enzymatic synthesis of polyesters from activated diesters was achieved under mild reaction conditions. The polymerization of bis(2,2,2-trichloroethyl) glutarate and 1,4-butanediol proceeded in the presence of PPL at room temperature in diethyl ether to produce the polyesters with molecular weight of 8.2 x 10. Vacuum was applied to shift the equilibrium forward by removal of the activated alcohol formed, leading to the production of high molecular weight polyesters. The polycondensation of bis(2,2,2-trifluoroethyl) sebacate and aliphatic diols took place using lipases BC, CR, MM, and PPL as catalyst in diphenyl ether. Under the... 

Divinyl esters reported first by us are efficient monomers for polyester production under mild reaction conditions. In the lipase PF-catalyzed polymerization of divinyl adipate and 1,4-butanediol in diisopropyl ether at 45°C, a polyester with molecular weight of 6.7 x 10 was formed, whereas adipic acid and diethyl adipate did not afford the polymeric materials under similar reaction conditions (Scheme 3). 

Aromatic polyesters were efficiently synthesized from aromatic diacid divinyl esters. Lipase CA induced the polymerization of divinyl esters of isoph-thalic acid, terephthalic acid, and p-phenylene diacetic acid with glycols to give polyesters containing aromatic moiety in the main chain. The highest molecular weight (7.2 x 10 ) was attained from a combination of divinyl isophthalate and 1,10-decanediol. Enzymatic polymerization of divinyl esters and aromatic diols also afforded the aromatic polyesters. ... 

A combinatorial approach for biocatalytic production of polyesters was demonstrated. A library of polyesters were synthesized in 96 deep-well plates from a combination of divinyl esters and glycols with lipases of different origin. In this screening, lipase CA was confirmed to be the most active biocatalyst for the polyester production. As acyl acceptor, 2,2,2-trifluoroethyl esters and vinyl esters were examined and the former produced the polymer of higher molecular weight. Various monomers such as carbohydrates, nucleic acids, and a natural steroid diol were used as acyl acceptor. 

Polyester synthesis was carried out hy insertion-dehydration of glycols into polyanhydrides using lipase CA as catalyst (Scheme 6). The insertion of 1,8-octanediol into poly(azelaic anhydride) took place at 30-60°C to give the corresponding polyester with molecular weight of several thousands. Effects of the reaction parameters on the polymer yield and molecular weight were systematically investigated. The dehydration reachon also proceeded in water. The reaction behaviors depended on the monomer structure and reaction media. 

Lipase-catalyzed synthesis of polyesters from cyclic anhydrides and oxi-ranes was reported. The polymerization took place by PPL catalyst and the molecular weight reached 1 x 10" under the selected reaction conditions. During the polymerizahon, the enzymatically formed acid group from the anhydride may open the oxirane ring to give a glycol, which is then reacted with the anhydride or acid by lipase catalysis, yielding the polyesters. 

Lipase CA also polymerized hydrophobic oxyacids efficiently. The DP value was beyond 100 in the polymerization of 16-hydroxyhexadecanoic acid, 12-hydroxy dodecanoic acid, or 10-hydroxy decanoic acid under vacuum at high temperature (90°C) for 24 h, whereas the polyester with lower molecular weight was formed from 6-hydroxyhexanoic acid under similar reaction conditions. This difference may be due to the lipase-substrate interachon. 

Ester-thioester copolymers were enzymatically synthesized (Scheme 7). ° The lipase CA-catalyzed copolymerization of e-caprolactone with 11-mercaptoundecanoic acid or 3-mercaptopropionic acid under reduced pressure produced the polymer with molecular weight higher than 2 x 10". The thioester unit of the resulting polymer was lower than the feed ratio. The transesterification between poly(8-caprolactone) and 11-mercaptoundecanoic acid or 3-mercaptopropionic acid also took place by lipase CA catalyst. Recently, aliphatic polythioesters were synthesized by lipase CA-catalyzed polycondensation of diesters with 1,6-hexanedithiol. ... 

Long-chain unsaturated a,oo-dicarboxylic acid methyl esters and their epox-idized derivahves were polymerized with 1,3-propanediol or 1,4-butanediol in the presence of lipase CA catalyst to produce reachve polyesters. The molecular weight of the polymer from 1,4-butanediol was higher than that from... 

Meanwhile we have shown that the excision activation of ICOR channels is due to disinhibition [72]. The respective inhibitor, operationally named cytosolic inhibitor (Cl), is present in the cytosol of placenta trophoblast cells HT29- and Tg4-colonic carcinoma cells and RE cells of normal and CF patients. The molecule has an apparent molecular weight of 700-1 500 Da it is amphiphilic heat stable and not digested by trypsin, proteases, nucleotidases, lipases or amylase [72]. Burc-khardt, Fromter and their collaborators [114] have confirmed our results and extracted a similar or identical Cl from kidney cortex. 

---