Methyl methacrylate polymerizations

These combination polymers can be used as a starting substance for methyl methacrylate polymerization. 

There are some indications that the situation described above has been realized, at least partially, in the system styrene-methyl methacrylate polymerized by metallic lithium.29 29b It is known51 that in a 50-50 mixture of styrene and methyl methacrylate radical polymerization yields a product of approximately the same composition as the feed. On the other hand, a product containing only a few per cent of styrene is formed in a polymerization proceeding by an anionic mechanism. Since the polymer obtained in the 50-50 mixture of styrene and methyl methacrylate polymerized with metallic lithium had apparently an intermediate composition, it has been suggested that this is a block polymer obtained in a reaction discussed above. Further evidence favoring this mechanism is provided by the fact that under identical conditions only pure poly-methyl methacrylate is formed if the polymerization is initiated by butyl lithium and not by lithium dispersion. This proves that incorporation of styrene is due to a different initiation and not propagation. 

This paper presents the physical mechanism and the structure of a comprehensive dynamic Emulsion Polymerization Model (EPM). EPM combines the theory of coagulative nucleation of homogeneously nucleated precursors with detailed species material and energy balances to calculate the time evolution of the concentration, size, and colloidal characteristics of latex particles, the monomer conversions, the copolymer composition, and molecular weight in an emulsion system. The capabilities of EPM are demonstrated by comparisons of its predictions with experimental data from the literature covering styrene and styrene/methyl methacrylate polymerizations. EPM can successfully simulate continuous and batch reactors over a wide range of initiator and added surfactant concentrations. 

Torkelson and coworkers [274,275] have developed kinetic models to describe the formation of gels in free-radical pol5nnerization. They have incorporated diffusion limitations into the kinetic coefficient for radical termination and have compared their simulations to experimental results on methyl methacrylate polymerization. A basic kinetic model with initiation, propagation, and termination steps, including the diffusion hmitations, was found to describe the gelation effect, or time for gel formation, of several samples sets of experimental data. 

The presence of two hydroxyl groups per molecule in poly-(methyl methacrylate) and in polystyrene, each polymerized in aqueous media using the hydrogen peroxide-ferrous ion initiation system, has been established " by chemical analysis and determination of the average molecular weight. Poly-(methyl methacrylate) polymerized by azo-bis-isobutyronitrile labeled with radioactive has been shown to... 

Data illustrating the relationship of the initial rate to the concentration of monomer at fixed initiator concentration are given in Table X for styrene in benzene and for methyl methacrylate polymerized at various concentrations in the same solvent. If the efficiency / of utilization of primary radicals is independent of the monomer concentration, the quantity given in the last column should be... 

In this paper the GPC interpretation underlying the kinetic model of methyl methacrylate polymerization previously publMied and by now shown to be useful is detailed and updated. It provides a prime example of the conventional experimental use of GPC in homopolymerization studio. 

Preparation of Block Copolymers. Poly(styrene-b-methyl methacrylate) and poly(styrene-b-t-butyl methacrylate) were prepared by procedures similar to those reported for poly(styrene-b-methyl methacrylate (12,13). Poly(methyl methacrylate-b-t-butyl methacrylate) was synthesized by adaptation of the method published (14) for syndiotactic poly(methyl methacrylate) polymerization of methyl methacrylate was initiated with fluorenyllithium, and prior to termination, t-butyl methacrylate was added to give the block copolymer. Pertinent analytical data are as follows. 

Early-on it was discovered that these Salen compounds, and the related six-coordinate cations [6], were useful as catalysts for the polymerization of oxiranes. These applications were anticipated in the efforts of Spassky [7] and in the substantial work of Inoue [8]. Subsequently, applications of these compounds in organic synthesis have been developed [9]. Additional applications include their use in catalytic lactide polymerization [10], lactone oligomerization [11], the phospho-aldol reaction [12], and as an initiator in methyl methacrylate polymerization [13]. 

Fig, 2l, Polymerization of methyl methacrylate and chloroprene by rubber mastication (69). 1 23.8% methyl methacrylate and 24.2% chloroprene added initially. 2 24.2% chloroprene polymerized, then 23.8% methyl methacrylate. 3 23,8% methyl methacrylate polymerized,... 

Figure 1. Isotactic, heterotactic, and syndiotactic triad frequencies (i, h, and s) in poly(methyl methacrylate) polymerized and initiated at 225 by t-butylmagnesium bromide fleft), t-butylmagnesium chloride fright,), and di-t-butylmagnesium (top) with initial mole fraction of monomer a = 0.10.

Schultz (7) has studied the methyl methacrylate polymerization, which is interesting to compare with effects noted in the poly (vinyl chloride)-styrene graft polymerization. When his polymerizations were carried out well below the glassy transition temperature, the conversions reached limiting values. Monomer present in the system functioned as a plasticizing agent, allowing polymerization to occur up to the point... 

P = monoalkene polymerization O = monoalkenc oligomerization X = oxo process D = alkadiene polymerization M = methyl methacrylate polymerization A = 1-alkene polymerization. b Complex unspecified. 

Bevington has continued his studies of the initiation reaction and of the reactivities of monomers towards reference radicals (69—71). A study of the polymerization of substituted styrenes was recorded (72). In methyl methacrylate polymerization by ammonium trichloroacetate in the presence of copper derivatives, the complexities of the initiation and termination reactions were elegantly unravelled by Bamford and Robinson using two differently labelled trichloroacetates (73). Apparently cyclic processes involving alternate oxidation and reduction of copper may arise. 

Table 2. Probability of isotactic or syndiotactic placements Coleman and Fox (18) methyl-methacrylate polymerizations at 0° C...

Early studies of the free radical polymerization of methyl methacrylate did not show a solvent influence (18, 22, 23, 24) and consequently no solvent dependent influence of the conversion on the tacticity (23). A solvent dependence on stereocontrol in methyl methacrylate polymerization was however found by Watanabe and Sono (25) as early as 1962. Apparently, their paper has been overlooked. A literature search and a recalculation of most of the published data showed solvent influences on stereocontrol to be the rule and not the exception (6). Later experimental data on methyl methacrylate in about 50 solvents (7) and in 14 solvents (8) confirmed the earlier findings of Watanabe and Sono (25). 

The steepest part of the T (t) curve, shown in Fig. 3.10, corresponds to the transition of epoxy resin into the rubbery state. In MDI curing and methyl methacrylate polymerization the amplitude of the response signal (T ) decreases monotononically and then becomes constant when the rigidity of the system reaches a certain level. The completeness of the reaction can be determined by saturation of the dT/dt(tf) curve. The product pCp is relatively insensitive to the transition of an oligomer to a polymer. The shape of the dT/dt(tf) curve is determined primarily by changes in the... 

The most favorable conditions for reactive processing of monolithic articles are created when the frontal reaction occurs at a plane thermal front. For example, a frontal process can be used for methyl methacrylate polymerization at high pressure (up to 500 MPa) in the presence of free-radical initiators. The reaction is initiated by an initial or continuous local increase in temperature of the reactive mass in a stationary mold, or in a reactor if the monomer is moving through a reactor. The main method of controlling the reaction rate and maintaining stability is by varying the temperature of the reactive mass.252... 

The synthetic aspects of coordination catalysis still receive far more attention than mechanistic aspects, and precious little can be said with assurance concerning the mechanisms of the foregoing polymerization reactions. Almost the opposite is true of the free radical initiation of vinyl polymerization by metal carbonyls. Bamford et al. (10,11) have studied the kinetics of several such reactions and arrived at plausible interpretations of their results. The initiation of methyl methacrylate polymerization by tetracobalt dodecacarbonyl in the presence of carbon tetrachloride was studied in detail and the results were rationalized in terms of the following mechanism ... 

Previous studies on paraffins, rhodamine dyes, and l,3-bis(N-carbozoyl) propane excimers have concluded that there is a relationship between km and polymer viscosity and free volume [103-105], Indeed, this dependence has been investigated in the context of decreasing free volume during methyl methacrylate polymerization [83,84], It has been shown that the nonradiative decay processes follow an exponential relationship with polymer free volume (vf), in which kra reduces as free volume is decreased [see Eq. (5)]. Here, k. represents the intrinsic rate of molecular nonradiative relaxation, v0 is the van der Waals volume of the probe molecule, and b is a constant that is particular to the probe species. Clearly, the experimentally observed changes in both emission intensity and lifetime for/ac-ClRe(CO)3(4,7-Ph2-phen) in the TMPTA/PMMA thin film are entirely consistent with this rationale. 

---