Methyl methacrylate catalyzed polymerization

Products from anionic polymerizations of methyl methacrylate catalyzed by Grignard reagents (RMgX) vary with the nature of the R and X groups, the reaction temperature, and the nature of the... 

Nakayama, Y Shibahara, T. Fukumoto, H. Nakamura, A. Syndiospecific polymerization of methyl methacrylate catalyzed by lanthanoid thiolate complexes bearing a hexamethylphosphoric triamide ligand. Macromolecules 1996, 29, 8014—8016. 

Matyjaszewski, K. Wei, M. Xia, J. McDermott, N. E. Controlled/ living radical polymerization of styrene and methyl methacrylate catalyzed by iron complexes. Macromolecules 1997, 30, 8161-8164. 

The cadmium chalcogenide semiconductors (qv) have found numerous appHcations ranging from rectifiers to photoconductive detectors in smoke alarms. Many Cd compounds, eg, sulfide, tungstate, selenide, teUuride, and oxide, are used as phosphors in luminescent screens and scintiUation counters. Glass colored with cadmium sulfoselenides is used as a color filter in spectroscopy and has recently attracted attention as a third-order, nonlinear optical switching material (see Nonlinear optical materials). DiaLkylcadmium compounds are polymerization catalysts for production of poly(vinyl chloride) (PVC), poly(vinyl acetate) (PVA), and poly(methyl methacrylate) (PMMA). Mixed with TiCl, they catalyze the polymerization of ethylene and propylene. 

A range of rare earth metal complexes were subsequently shown to catalyze ethylene polymerization and, on occasion, living characteristics have been reported.226-228 Dimeric hydrides such as (79)—(82) are extremely active with turnover numbers > 1800 s-1 recorded for (79) at room temperature. The samarium hydride (82) also effects the block copolymerization of methyl methacrylate (MMA) and ethylene 229 further discussion may be found in Section 9.1.4.4. 

At 24 °C and 15-60 bar ethylene, [Rh(Me)(0H)(H20)Cn] catalyzed the slow polymerization of ethylene [4], Propylene, methyl acrylate and methyl methacrylate did not react. After 90 days under 60 bar CH2=CH2 (the pressure was held constant throughout) the product was low molecular weight polyethylene with Mw =5100 and a polydispersity index of 1.6. This is certainly not a practical catalyst for ethylene polymerization (TOP 1 in a day), nevertheless the formation and further reactions of the various intermediates can be followed conveniently which may provide ideas for further catalyst design. For example, during such investigations it was established, that only the monohydroxo-monoaqua complex was a catalyst for this reaction, both [Rh(Me)3Cn] and [Rh(Me)(H20)2Cn] were found completely ineffective. The lack of catalytic activity of [Rh(Me)3Cn] is understandable since there is no free coordination site for ethylene. Such a coordination site can be provided by water dissociation from [Rh(Me)(OH)(H20)Cn] and [Rh(Me)(H20)2Cn] and the rate of this exchange is probably the lowest step of the overall reaction.The hydroxy ligand facilitates the dissociation of H2O and this leads to a slow catalysis of ethene polymerization. 

Ruthenium(II)-NHC systems ean be used for atom transfer radical polymerization (ATRP). Generally, similar results as for the analogous phosphine complexes are obtained. For the ATRP of styrene and methyl methacrylate (MMA) [(NHC)2peBr2] was found to rival copper(I)-based systems and to yield poly (MMA) with low polydispersities. Polymerizations based on olefin metathesis that are catalyzed by ruthenium-NHC complexes are discussed separately vide supra). 

By taking advantage of the simultaneous enzyme inhibition by nickel, the nickel-catalyzed ATRP, and the stereoselectivity of the enzyme, Peters et al. obtained chiral block copolymers by this method from 4-methyl-e-caprolactone (4-MeCL) by [27], The polymerization of racemic 4-MeCL showed good enantioselectivity and produced a chiral macroinitiator with ATRP endgroup by selectively polymerizing only the (5 )-4-MeCL. Macroinitiation was then started by adding the nickel catalyst and methyl methacrylate (MMA) to the reaction mixture, which simultaneously inhibited the enzyme and activated the ATRP process. Chiral poly[MMA-fe-(5 )-4-MeCL] was successfully obtained in this synthesis. 

Because of acid-catalyzed hydrolysis of N-vinylpyrrolidone in water, polymerization was carried out in organic solvent - DMF. Three types of samples of poly(methacrylic acid) were used syndiotactic - obtained by radiation polymerization, atactic - obtained by radical polymerization, and isotactic - obtained by hydrolysis of isotactic poly(methyl methacrylate). It was found that in all cases the rate enhancement appeared in comparison with the blank polymerization (without template). The rate enhancement became more pronounced with increasing chain length and syndiotacticity of the template. According to the authors, the rate enhancement is connected with the stronger complex formation between poly(vinyl pyrrolidone) and syndiotactic poly(methacrylic acid) then with isotactic template. This conclusion was supported by turbimetric titration in DMF/DMSO system and by model considerations. It is worth noting, however, that... 

Many dialkyl and diaryl cadmium compounds have found use as polymerization catalysts. For example, the diethyl compound catalyzes polymerization of vinyl chloride, vinyl acetate, and methyl methacrylate (45), and when mixed with TiCl can be used to produce polyethylene and crystalline polypropylene for filaments, textiles, glues, and coatings (45). With >50% TiCl diethyl cadmium polymerizes dienes. Diethyl cadmium maybe used as an intermediate ethylating agent in the production of tetraethyllead. The diaryl compounds such as diphenylcadmium [2674-04-6]> (C H Cd, (mp 174°C) are also polymerization catalysts. These compounds are also prepared using Grignard or arylUthium reagents in tetrahydrofiiran (THF) solvent but may be prepared by direct metal substitution reactions such as ... 

Block copolymers can be produced from terminally borane-containing polyolefins. These borane-containing POs can be synthesized by the metallocene-catalyzed (co)polymerization of olefin(s) monomer with 9-BBN as a chain transfer agent or by the metallocene catalyzed copolymerization of olefins with allyl-9-BBN [55,56], as referred to above. Alternatively, borane-containing POs were prepared by hydroboration of terminally unsaturated PO, for instance, terminally vinyl PE and terminally vinylidene PP [33-35,57]. Such method could produce diblock copolymers, such as polyethylene-block-poly(methyl methacrylate) (PE-fo-PMMA), polypropylene-foZock-poly(methyl methacrylate) (PP-fc-PMMA), polypropylene-foZock-poly(butyl methacrylate) (PP-fc-PBMA), and PP-fc-PS. 

Silicone/PMMA IPNs have been prepared by crosslinking the silicone network at room temperature (RTV) and crosslinking the PMMA at a higher temperature. He et al. [93-95] crosslinked the silicone via the condensation of a disilanol and tetraorthosilicate catalyzed by stannous octoate. The second network was formed by radical polymerization of methyl methacrylate with... 

Nishioka, Watanabe, Abe, and Sono (48) carried out an extensive study of the Grignard reagent catalyzed polymerization of methyl methacrylate in toluene with respect to tactidty of the resulting polymers. The tactidty of the polymer was determined quantitatively by nuclear magnetic resonance analysis. It was found that the stereo-regularity depended on the nature of the R group of the Grignard... 

The free radical polymerization is probably initiated by the reaction of the peroxide with a metal—carbon bond which has been modified through complexation, solvation, or even chemical interaction with a proper monomer. This "site is interacted with the peroxide molecule, which is then decomposed in a metal-catalyzed manner to form a free radical terminus on the polymer chain along with an inert metal—peroxide interaction product. Whether the metal in question is aluminum, titanium, or a complex of the two is uncertain since the mechanism of Ziegler type reactions is still uncertain and since all three have been found in separate studies to promote the polymerization of methyl methacrylate in the presence of peroxides. However, the complex between AlEt>Cl and TiCl3 has been observed to have a much greater effect in accelerating the polymerization of methyl methacrylate than either component by itself hence, the complex appears to be the most likely species. 

Draw a mechanism for a base-catalyzed polymerization of methyl a-methacrylate to give the Plexiglas polymer. 

Many solvents form dangerous levels of peroxides during storage e.g., dipropyl ether, divinylacetylene, vinylidene chloride, potassium amide, sodium amide. Other compounds form peroxides in storage but concentration is required to reach dangerous levels e.g., diethyl ether, ethyl vinyl ether, tetrahydrofuran, p-dioxane, l,l-diethox) eth-ane, ethylene glycol dimethyl ether, propyne, butadiene, dicyclopentadiene, cyclohexene, tetrahydronaphthalenes, deca-hydrona-phthalenes. Some monomeric materials can form peroxides that catalyze hazardous polymerization reactions e.g., acr) lic acid, acr)Ionitrile, butadiene, 2-chlorobutadiene, chlorotrifluoroethylene, methyl methacrylate, styrene, tetrafluoroethylene,... 

Figure 6. Temperature-time curves showing the effects of various monomers catalyzed with the same vazo concentration, on the polymerization exotherms of basswood-monomer composites (35). Key MM A, methyl methacrylate TBS, tert-butylstyrene and VT, vinyltoluene.

Titanium was successfully incorporated into MCM-41 [50], Up to about 5 % Ti concentration the Ti is built into the pore walls. Attempts to incorporate more than 5 % Ti produced mostly extra-wall Ti02 species. MCM-41 containing tungsten catalyzes the polymerization of styrene, vinyl acetate, and methyl methacrylate [51],... 

---