Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Metals physical characteristics

Binary compounds are few, those of importance being the halides (Section 17-B-2) and the black oxide (VO), which has an NaCl lattice but is prone to nonstoichiometry (obtainable with 45-55 at. % oxygen). It has somewhat metallic physical characteristics. Chemically it is basic, dissolving in mineral acids to give V" solutions. [Pg.729]

Physical characteristics of metals have a significant impact on machinabihty. These include microstmctural features such as grain size, mechanical properties such as tensile properties, and physical properties such as thermal conductivity. [Pg.238]

Insoluble sulfonated pigments are made from colorants that contain a sulfonic acid group that is easily converted into an insoluble metal salt. In most cases, the sulfonic acid group is ortho to the diazo further reducing the solubilizing characteristics of the sulfonic grouping. The shade of these products is affected by the metal incorporated into the molecule and the physical characteristics of the colorants. D C Red Nos. 7 (19b) and 34 (26) are insoluble sulfonated pigments. [Pg.443]

H = di(Z—iy di are the potential parameters I is the orbital quantum number 3 characterizes the spin direction Z is the nuclear charge). Our experience has show / that such a model potential is convenient to use for calculating physical characteristics of metals with a well know electronic structure. In this case, by fitting the parameters di, one reconstructs the electron spectrum estimated ab initio with is used for further calculations. [Pg.142]

Numerous proprietary electrolytes have been developed for the production of harder and brighter deposits. These include acid, neutral and alkaline solutions and cyanide-free formulations and the coatings produced may be essentially pure, where maximum electrical conductivity is required, or alloyed with various amounts of other precious or base metals, e.g. silver, copper, nickel, cobalt, indium, to develop special physical characteristics. [Pg.559]

For ruthenium, electrolytes based on ruthenium sulphamate or nitrosyl-sulphamate have been described, but the most useful solutions currently available are based on the anionic complex (H2 0 Cl4 Ru N Ru-Cl4-OH2) . The latter solutions operate with relatively high cathode efficiency to furnish bright deposits up to a thickness of about 0-005 0 mm, which are similar in physical characteristics to electrodeposited rhodium and have shown promise in applications for which the latter more costly metal is commonly employed. Particularly interesting is the potential application of ruthenium as an alternative to gold or rhodium plating on the contact members of sealed-reed relay switches. [Pg.563]

Binders (TbC) 671 Bipolar pulse conductivity detector (LC) 588 Bonded phases (GC) 125 crosslinked 126 estersils 125 nonextractable 126 siloxane 125 Bonded phases (LC) 324 carbon loading 335 cleavage of ligands 336 eluotropic strength (LSC) 382 endcapping 326 hydrophobicity 364 metal impurities 369 models for surface 337 physical characteristics 333, 366... [Pg.509]

The combination of physical and chemical characteristics of nodules make impossible the application of methods of physical beneficiation such as flotation and magnetic separation to produce concentrates of valuable metals, and so chemical processing must be used. Their processing also tends to be much more energy-intensive, vis-a-vis that of conventional land-based ores. Deep-sea manganese nodules are quite unlike any terrestrial ores, both with respect to their physical characteristics and to their mineralogical and chemical compositions new processes are, therefore, required. [Pg.570]

Chemical and physical properties of the contaminant should also be investigated. Solubility in water (or other washing fluids) is one of the most important physical characteristics. Hydrophobic contaminants can be difficult to separate from the soil particles and into the aqueous washing fluid. Reactivity with wash fluids may, in some cases, be another important characteristic to consider. Other contaminant characteristics such as volatility and density may be important for the design of remedy screening studies and related residuals treatment systems. Speciation is important in metal-contaminated sites. [Pg.563]

When an incinerator is designed, the waste to be burned must be characterized for properties such as heat content (fuel value), percent moisture, chlorine content, metals content, and physical characteristics. The size and physical layout of the incinerator should be based on those waste properties. [Pg.957]

Physical Characteristics of Highly Reactive Metal Powders... [Pg.229]

The abundance patterns of individual stars of different ages and environments enable us to unlock the evolutionary history of galaxies. Many physical characteristics of a galaxy may change over time, such as shape and colour, however the metal content and abundance ratios of stellar atmospheres are not so easy to tamper with. Stars retain the chemical imprint of the interstellar gas out of which they formed, and metals can only increase with time. This method to study galaxy evolution has been elegantly named Chemical Tagging [2],... [Pg.213]

The physical characteristics of metals that permit them to function as versatile materials for fabricating many items are their ductility, malleability, and strength. Although strength probably needs no explanation, the first two of these characteristics are related to the ability of the metal to be fabricated into a desired shape. Metals vary widely in these characteristics, and a metal or alloy that is well suited to one use may be entirely unsatisfactory for another. Addressing this branch of applied science is beyond the scope of this book, but a book on materials science provides a great deal of information that is relevant for students in inorganic chemistry. [Pg.376]

Although the formation of ionic hydrides is usually exothermic, the formation of interstitial hydrides may have positive enthalpy values. Physical characteristics of interstitial hydrides are determined by the fact that hydrogen atoms in interstitial positions cause some expansion of the lattice but contribute very little mass. Consequently, the interstitial hydrides always have lower densities than the metal itself, even though the crystal structure is normally the same. When interstitial positions contain hydrogen atoms, the flow of electrons in conduction bands within the metal is impeded, so the... [Pg.421]

The placement of an unknown element with an atomic number of 87 in group 1, period 7 of the periodic table was one of Dimitri Mendeleevs ideas based on the chemical properties and physical characteristics of the other alkali metals. In the late nineteenth century, Mendeleev named this unknown element eka-cesium and predicted its properties based on what was known of cesium s placement on the periodic table. This led to worldwide searches for element number 87, which were not all successful but which did result in proposed names for eka-cesium (moldavium, virginium, russium). [Pg.64]

Actinium is the last (bottom) member of group 3 (IIIB) of elements in the periodic table and the first of the actinide series of metallic elements that share similar chemical and physical characteristics. Actinium is also closely related in its characteristics to the element lanthanum, which is located just above it in group 3. The elements in this series range from atomic number 89 (actinium) through 103 (lawrencium). Actiniums most stable isotope is actinium-227, with a half-life of about 22 years. It decays into Fr-223 by alpha decay and Th-227 through beta decay, and both of these isotopes are decay products from uranium-235. [Pg.308]

AH the isotopes of americium belonging to the transuranic subseries of the actinide series are radioactive and are artificially produced. Americium has similar chemical and physical characteristics and is hofflologous to europium, located just above it in the rare-earth (lanthanide) series on the periodic table. It is a bright-white malleable heavy metal that is somewhat similar to lead. Americiums melting point is 1,176°C, its boiling point is 2,607°C, and its density is 13.68g/cm. ... [Pg.321]

In principle, one could consider a number of metals and alloys to be used for the construction of the magnet but, considering their physical and electrical characteristics, copper and silver are undoubtedly the best choices. This assertion sounds obvious but the use of other metals with higher resistivity, such as aluminum alloys, is sometimes justified because of their negligible cost and mechanical properties which simplify the manufacturing process. The most important physical characteristics of the best conductors such as OF copper (Oxygen Free) and silver, are shown in Table I. [Pg.417]

Using the catalyst vendor s equilibrium catalyst report, the physical properties of the circulating catalyst may be monitored for any change. Albemarle routinely analyzes a sample of the circulating catalyst inventory among others for physical characteristics, including surface area (SA), metal content, apparent bulk density (ABD), and particle size distribution (PSD). [Pg.102]

As yet no conclusive evidence of a variation in the heat of adsorption with the physical characteristics of the metal surface has been presented. We would however anticipate that amorphous or irregular surfaces should adsorb more strongly and consequently... [Pg.148]

Recently, reports have appeared on a class of ILs known as task specific ionic liquids (TSIL). The term was introduced by J. H. Davis, Jr s group to refer to those ILs which have functional groups attached to them so as to give specific properties and functionalities. Thus, they not only perform specific functions like metal ion extraction,catalysisand capture of but also maintain the desired physical characteristics such as physical state, non-volatility, viscosity, etc. The implementation of TSILs further enhances the versatility of classical ILs where both reagent and medium are coupled. The union of reagent with medium has been... [Pg.181]

As organic solvents have different physical characteristics, aqueous standards cannot be used for calibration when determining trace metals in oils or petroleum fractions. The sample can either be ashed or diluted in a... [Pg.12]


See other pages where Metals physical characteristics is mentioned: [Pg.23]    [Pg.49]    [Pg.52]    [Pg.180]    [Pg.259]    [Pg.259]    [Pg.302]    [Pg.381]    [Pg.107]    [Pg.180]    [Pg.133]    [Pg.593]    [Pg.1084]    [Pg.1155]    [Pg.253]    [Pg.117]    [Pg.78]    [Pg.121]    [Pg.146]    [Pg.56]    [Pg.17]    [Pg.139]    [Pg.81]    [Pg.129]    [Pg.318]    [Pg.7]    [Pg.1]   
See also in sourсe #XX -- [ Pg.8 ]




SEARCH



Metal characteristics

Metals physical

Physical characteristics

© 2024 chempedia.info