Metal-matrix composites aluminum

Electronic-Grade MMCs. Metal-matrix composites can be tailored to have optimal thermal and physical properties to meet requirements of electronic packaging systems, eg, cotes, substrates, carriers, and housings. A controUed thermal expansion space tmss, ie, one having a high precision dimensional tolerance in space environment, was developed from a carbon fiber (pitch-based)/Al composite. Continuous boron fiber-reinforced aluminum composites made by diffusion bonding have been used as heat sinks in chip carrier multilayer boards. 

Beryllium and aluminum are virtually insoluble in one another in the soHd state. The potential therefore exists for an aluminum—beryllium metal matrix composite with lower density and higher elastic modulus, ie, improved specific modulus, than conventional aluminum alloys produced by ingot or powder metal processing. At least one wrought composite system with nominally 62 wt % Be and 38 wt % A1 has seen limited use in aerospace appheations (see Composites). 

Developments in metal-matrix composites technology has resulted in aluminum matrix materials filled with siUcon carbide [409-21 -2] SiC, (see Carbides, silicon carbide) particles (15 to 60 vol %) that provide the possibihty of weight reduction for brakes (20). These composite materials are being tested and evaluated. 

Let s address the issue of nonlinear material behavior, i.e., nonlinear stress-strain behavior. Where does this nonlinear material behavior come from Generally, any of the matrix-dominated properties will exhibit some degree of material nonlinearity because a matrix material is generally a plastic material, such as a resin or even a metal in a metal-matrix composite. For example, in a boron-aluminum composite material, recognize that the aluminum matrix is a metal with an inherently nonlinear stress-strain curve. Thus, the matrix-dominated properties, 3 and Gj2i generally have some level of nonlinear stress-strain curve. 

Applications. Boron fibers are used as unidirectional reinforcement for epoxy composites in the form of preimpregnated tape. The material is used extensively, mostly in fixed and rotary wing military aircrafts for horizontal and vertical stabilizers, mdders, longerons, wing doublers, and rotors. They are also used in sporting goods. Another application is as reinforcement for metal matrix composites, in the form of an array of fibers pressed between metal foils, the metal being aluminum in most applications. 

Reinforcement for metal-matrix composites with such metals as titanium, titanium aluminide, aluminum, magnesium, and copper. Applications are found mostly in advanced aerospace programs and include fan blades, drive shafts, and other components. 

Ceramic matrix composites are produced by one of several methods. Short fibers and whiskers can be mixed with a ceramic powder before the body is sintered. Long fibers and yams can be impregiated with a slurry of ceramic particles and, after drying, be sintered. Metals (e.g., aluminum, magnesium, and titanium) are frequently used as matrixes for ceramic composites as well. Ceramic metal-matrix composites are fabricated by infiltrating arrays of fibers with molten metal so that a chemical reaction between the fiber and the metal can take place in a thin layer surrounding the fiber. 

Aerosol spray delivery, 23 196 Aerosol sprays, 7 773-774 Aerospace applications aluminum alloys, 2 340 artificial graphite in, 72 740-741 for high performance fibers, 13 397-398 of liquid-crystal polymers, 20 85 metal-matrix composites in, 16 191 polyimide matrix composites in, 20 284 Aerospace bearings, corrosion resistance of, 74 452... 

Diwanji, A.P. and Hall, I.M. (1992). Fiber and fiber-surface treatment effects in carbon-aluminum metal matrix composites. J. Mater. Sci. 27, 2093-2100. 

Often there is a borrowing of terms between metal-intense materials science and polymer-intense materials science where there is actually little relationship between the two. This is not the case with metal-matrix composites (MMCs). Although the materials are often different, there are a number of similarities. For polymer-intense composites, the matrix materials are organic polymers. For MMCs, the matrix materials are typically a metal or less likely an alloy. Popular metals include aluminum, copper, copper-alloys, magnesium, titanium, and superalloys. ... 

Meial Mairix Composites. Silicon carbide particles are contributing to easy-to-cast metal-matrix composites (MMCs). When compared with their non-reinforced counterparts, the SiCp/Al components are more wear resistant, stiffer, and stronger, accompanied by improved thermal stability. Additional advantages include lower density and lower cost. Nearly all prior aluminum MMCs required labor-intensive methods, such as powder metallurgy, diffusion bonding, squeeze casting, or thermal spraying. 

Metals and ceramics (claylike materials) are also used as matrices in advanced composites. In most cases, metal matrix composites consist of aluminum, magnesium, copper, or titanium alloys of these metals or intermetallic compounds, such as TiAl and NiAl. The reinforcement is usually a ceramic material such as boron carbide (B4C), silicon carbide (SiC), aluminum oxide (A1203), aluminum nitride (AlN), or boron nitride (BN). Metals have also been used as reinforcements in metal matrices. For example, the physical characteristics of some types of steel have been improved by the addition of aluminum fibers. The reinforcement is usually added in the form of particles, whiskers, plates, or fibers. 

J. C. McClure, Tool Wear and Shape Optimization in the Friction-Stir Welding of Aluminum Metal-Matrix Composite, Friction Stir Welding and Processing II,... 

J. Wert, Microstructure of Friction Stir Weld Joints between an Aluminum-Base Metal Matrix Composite and a Monolithic Aluminum Alloy, Scr. Mater., Vol 49, 2003, p 607-612... 

These concepts can be applied to many metallic materials and metal-matrix composites, but they have maximum impact on aluminum and magnesium alloys and components. 

M. Eslamian, J. Rak, and N. Ashgriz. Preparation of aluminum/silicon carbide metal matrix composites using centrifugal atomization. Powder Technology, 184(l) ll-20, 2008. 

The combination of infiltration and reaction that characterizes DMO has been exploited to make a number of composites. As long ago as 1953, it was shown that silica containing refractories were reduced by molten aluminum to form alumina and silicon [4], Subsequently [27], the displacement reaction was extended to the formation of composites of alumina with residual Al-Si. More recently, the Al-Si02 displacement reaction has been used in the infiltration of dense preforms of silica [28] and mullite [29,30] by molten aluminum. Extension of the reactive infiltration process to porous silica-containing preforms [31,32] has resulted in the fabrication of metal-matrix composites in which the silica was replaced by a mixture of about 65% alumina and 35% metal, while the pores were infiltrated by molten alloy. In contrast to DMO, the displacement reaction appears to proceed at a critical temperature of 1100-1200°C and without the need for a volatile solute element or oxygen. Borosilicate glass has also been used as an initiator to enable the infiltration of Al-Si alloys into alumina preforms [33]. 

SiC whisker also can be combined with metals (MMCs, metal matrix composites) to increase the high temperature strength of the material as well as provide a comparable substitution for heavier traditional materials, such as steel. MMCs can be fabricated by infiltrating a SiC whisker preform with aluminum or by addition of SiC whiskers to molten aluminum. 

Other metal matrix composites with B4C particulates have been obtained using aluminum because of slow reaction kinetics. The process is based on an infiltration... 

The Saffil fiber which contains 4% of silica is produced by the blow extrusion of partially hydrolyzed solutions of some aluminum salts with a small amount of silica, in which the liquid is extruded through apertures into a high velocity gas stream. The fiber contains mainly small 8-alumina grains of around 50 run but also some a-alumina grains of 100 run. The widest use of the Saffil type fiber in composites is in the form of a mat which can be shaped to the form desired and then infiltrated with molten metal, usually aluminium alloy. It is the most successful fiber reinforcement for metal matrix composite. 

SiC whiskers were initially developed in the early 1960s. However, their use was originally to be applied to the reinforcement of metal matrices, such as aluminum. These metal matrix composites were only a small commercial success, mainly because of the high cost of the whiskers. The first application of whisker reinforcement to ceramics, and in particular alumina, did not occur until the 1980 s. For the purposes of this article, SiC whiskers will be defined to be acicular or needle-like shaped, discontinuous, nearly single crystals. 

---