Metal ions quantitation

The oxidation of a series of alkyl and aryl thiols in aqueous alkaline solution has been studied in the presence of various metal ions. Quantitative amounts of disulfide were produced in all cases. The oxidation rate of thiols has been found to be affected by the geometric size and electron-directing properties of substituent groups in the organic chains of the thiols. The best three catalysts, when added as simple salts, have been found to be copper, cobalt, and nickel. The dependence of the rates of oxidation on the concentrations of reactants have been investigated in some detail. 

In addition to these reactions, metal ions and ligands may participate in many other equilibria reactions such as complex formation, protolysis, and hydrolysis reactions. In order to transfer metal ions quantitatively into the organic phase, the extraction conditions (pH, reagent concentrations, volume ratio of the liquid phases) must be optimized. Figure 146 represents the response of molybdenum as a function of pH in three different organic solvents with toluene-3,4-dithiol and 8-hydroxyquinoline as ligands. According to this plot the determination of molybdenum is most sensitive in MIBK... 

Horrocks WD Jr, CoUier WE. Lanthanide ion luminescence probes. Measurement of distance between intrinsic protein fluorophores and bound metal ions quantitation of energy transfer between tryptophan and terbiimi(lll) or europiimi(lII) in the caldiun-binding protein parvalbu-min. J Am Chem Soc. 1981 103(10) 2856-2862. 

Perhaps the most extensively studied catalytic reaction in acpreous solutions is the metal-ion catalysed hydrolysis of carboxylate esters, phosphate esters , phosphate diesters, amides and nittiles". Inspired by hydrolytic metalloenzymes, a multitude of different metal-ion complexes have been prepared and analysed with respect to their hydrolytic activity. Unfortunately, the exact mechanism by which these complexes operate is not completely clarified. The most important role of the catalyst is coordination of a hydroxide ion that is acting as a nucleophile. The extent of activation of tire substrate througji coordination to the Lewis-acidic metal centre is still unclear and probably varies from one substrate to another. For monodentate substrates this interaction is not very efficient. Only a few quantitative studies have been published. Chan et al. reported an equilibrium constant for coordination of the amide carbonyl group of... 

A quantitative correlation between rate and equilibrium constants for the different metal ions is absent. The observed rate enhancements are a result of catalysis by the metal ions and are clearly not a result of protonation of the pyridyl group, since the pH s of all solutions were within the region where the rate constant is independent of the pH (Figure 2.1). 

So far the four metal ions have been compared with respect to their effect on (1) the equilibrium constant for complexation to 2.4c, (2) the rate constant of the Diels-Alder reaction of the complexes with 2.5 and (3) the substituent effect on processes (1) and (2). We have tried to correlate these data with some physical parameters of the respective metal-ions. The second ionisation potential of the metal should, in principle, reflect its Lewis acidity. Furthermore the values for Iq i might be strongly influenced by the Lewis-acidity of the metal. A quantitative correlation between these two parameters... 

Smith, R. L. Popham, R. E. The Quantitative Resolution of a Mixture of Group II Metal Ions by Thermometric Titration with EDTA, /. Chem. Educ. 1983, 60, 1076-1077. 

EDTA forms colored complexes with a variety of metal ions that may serve as the basis for a quantitative spectrophotometric method of analysis. The molar absorptivities of the EDTA complexes of Cu +, Co +, and Ni + at three wavelengths are summarized in the following table (all values of e are in cm )... 

The addition of paramagnetic species, such as the metal ions Cu ", Mn, or CF", can have dramatic effects on both the observed spectmm and the relaxation behavior of a molecule. The added ion reduces nuclear relaxation times, and permitting more rapid data collection. In addition, faster relaxation rates minimize NOE effects in the spectra, which can be useful in obtaining quantitative intensity data. The most widely used reagent for this purpose is chromium acetylacetonate [13681 -82-8] known as Cr(acac)2. Practically speaking, the use of such reagents requires care, because at... 

Action of catalytic amounts of vanadium compounds on oxaziridine (52) yields caprolactam almost quantitatively. Reductive opening of the oxaziridine ring and /3-scission yield radical (118), which recyclizes with elimination of the metal ion to form the lactam (63) (77JPR274). 

The capacity factors of SN-SiO, for metal ions were determined under a range of different conditions of pH, metal ions concentrations and time of interaction. Preconcentration of Cd ", Pb ", Zn " and CvS were used for their preliminary determination by flame atomic absorption spectroscopy. The optimum pH values for quantitative soi ption ai e 5.8, 6.2, 6.5, 7.0 for Pb, Cu, Cd and Zn, respectively. The sorption ability of SN-SiO, to metal ions decrease in line Pb>Cu> >Zn>Cd. The soi ption capacity of the sorbent is 2.7,7.19,11.12,28.49 mg-g Hor Cd, Zn, Pb, andCu, respectively. The sorbent distribution coefficient calculated from soi ption isotherms was 10 ml-g for studied cations. All these metal ions can be desorbed with 5 ml of O.lmole-k HCl (sorbent recovery average out 96-100%). 

Ideally, to ensure the complete removal of the metal ions from the aqueous phase, the complexant and the metal complex should remain in the hydrophobic phase. Thus, the challenges for separations include the identification of extractants that quantitatively partition into the IL phase and can still readily complex target metal ions, and also the identification of conditions under which specific metal ion species can be selectively extracted from aqueous streams containing inorganic complexing ions. 

Poloxamers are used primarily in aqueous solution and may be quantified in the aqueous phase by the use of compleximetric methods. However, a major limitation is that these techniques are essentially only capable of quantifying alkylene oxide groups and are by no means selective for poloxamers. The basis of these methods is the formation of a complex between a metal ion and the oxygen atoms that form the ether linkages. Reaction of this complex with an anion leads to the formation of a salt that, after precipitation or extraction, may be used for quantitation. A method reported to be rapid, simple, and consistently reproducible [18] involves a two-phase titration, which eliminates interferences from anionic surfactants. The poloxamer is complexed with potassium ions in an alkaline aqueous solution and extracted into dichloromethane as an ion pair with the titrant, tet-rakis (4-fluorophenyl) borate. The end point is defined by a color change resulting from the complexation of the indicator, Victoria Blue B, with excess titrant. The Wickbold [19] method, widely used to determine nonionic surfactants, has been applied to poloxamer type surfactants 120]. Essentially the method involves the formation in the presence of barium ions of a complex be-... 

The method may also be applied to the analysis of silver halides by dissolution in excess of cyanide solution and back-titration with standard silver nitrate. It can also be utilised indirectly for the determination of several metals, notably nickel, cobalt, and zinc, which form stable stoichiometric complexes with cyanide ion. Thus if a Ni(II) salt in ammoniacal solution is heated with excess of cyanide ion, the [Ni(CN)4]2 ion is formed quantitatively since it is more stable than the [Ag(CN)2] ion, the excess of cyanide may be determined by the Liebig-Deniges method. The metal ion determinations are, however, more conveniently made by titration with EDTA see the following sections. 

Many complexes of metals with organic ligands absorb in the visible part of the spectrum and are important in quantitative analysis. The colours arise from (i) d- d transitions within the metal ion (these usually produce absorptions of low intensity) and (ii) n->n and n n transitions within the ligand. Another type of transition referred to as charge-transfer may also be operative in which an electron is transferred between an orbital in the ligand and an unfilled orbital of the metal or vice versa. These give rise to more intense absorption bands which are of analytical importance. 

With growing interest in the chemical behaviour of actinide ions in the environment (1), the complexation of these ions with carbonate anions has been recently attracting particular attention (2-10) due to the ubiquitous presence of carbonate ions in nature (11, 12) and their pronounced tendency to form complexes with heavy metal ions (7, 10-14). In spite of the carbonate complexation of actinides being considered important chemical reactions for understanding the chemistry of actinides in natural fluids, not many experiments have been devoted up to now to the quantitative study of the subject, though numerous qualitative observations are discussed in the literature. Although there are a few papers reporting the formation constants of carbonate complexes... 

Precipitation reactions have many applications. One is to make compounds. The strategy is to choose starting solutions that form a precipitate of the desired insoluble compound when they are mixed. Then we can separate the insoluble compound from the reaction mixture by filtration. Another application is in chemical analysis. In qualitative analysis—the determination of the substances present in a sample—the formation of a precipitate is used to confirm the identity of certain ions. In quantitative analysis, the aim is to determine the amount of each substance or element present. In particular, in gravimetric analysis, the amount of substance present is determined by measurements of mass. In this application, an insoluble compound is precipitated, the precipitate is filtered off and weighed, and from its mass the amount of a substance in one of the original solutions is calculated (Fig. 1.6). Gravimetric analysis can be used in environmental monitoring to find out how much of a heavy metal ion, such as lead or mercury, is in a sample of water. 

In addition to the interactions discussed above, which all depend in part on the ioniz-ability, or at least polarizability, of the surface and the adsorbates, hydrophobic parts of ligands may bind to corresponding parts of surfaces. Thus, if a metal ion is complexed or irreversibly bonded to a hydrophobic molecule, the metal may be incorporated into the bulk or surface of a particle via hydrophobic interaction between the molecule and the solid phase. Such interactions may be quantitatively significant in systems with high concentrations of dissolved and particulate organic matter. 

A substance that generates hydroxide ions quantitatively in aqueous solution is a strong base. The most common strong bases are the soluble metal hydroxides, among which NaOH perennially ranks among the top ten industrial chemicals. When a soluble metal hydroxide dissolves in water, it generates metal cations and hydroxide anions NaOH (5 ) H2 O Na (a q) + OH (a q)... 

---