Metal-centered catalysts

Other metal-centered catalysts that have been studied include (te)strapped chiral porphyrins derived from L-proline, which can induce modest (< 30%) enantioselectivity <02EJIOC1666>. Supported amidate-bridged platinum blue complexes, which have not yet been applied to chiral epoxidation, but which show promise of utilizing molecular oxygen as the terminal oxidant, have... 

The dicyclohexylimidizole additive could be omitted when the threitol-strapped ligand was replaced with complex 39 containing a pseudo-C2 axis of symmetry bisecting the porphyrin plane (Fig. 13) [92]. This ligand offers ample space for olefin approach while at the same time creating a dissymmetric environment in close proximity to the metal center. Catalyst loadings as low as... 

The reoxidation rate of the reduced metal is important in an efficient catalyst system. The metal-centered catalyst may have the proper redox potential for O2 oxidation, but if the rate of catalyst decomposition is competitive, then loss of the active catalyst results. To overcome issues of low turnover number (TON) and turnover frequency (TOE), added reagents are often used to couple multiple catalytic cycles in a biomimetic fashion [18]. Transition metals known to activate O2 based on biological precedence are commonly used as coupling reagents, including Cu(II), Co(II), Ee(II) and Mn(II) [2]. Many other organic molecules, such as quinones and catechols, can also act as redox couples. 

Ca.ta.lysis, Iridium compounds do not have industrial appHcations as catalysts. However, these compounds have been studied to model fundamental catalytic steps (174), such as substrate binding of unsaturated molecules and dioxygen oxidative addition of hydrogen, alkyl haHdes, and the carbon—hydrogen bond reductive elimination and important metal-centered transformations such as carbonylation, -elimination, CO reduction, and... 

A model for the intermediate consisting of substrates 36 and 8a coordinated to catalyst 37a was proposed as shown in Scheme 6.30 [74]. In the model 39 the two triflate ligands are dissociated from copper. The ligands are arranged around copper as a trigonal bipyramid and it should be noted that in this model the oxygen atom of the vinyl ether 8a also coordinates to the metal center. However, another tetrahedral intermediate consisting of only the catalyst and the nitrone could also account for the absolute selectivity of the reaction. 

The importance of the o-hydroxyl moiety of the 4-benzyl-shielding group of R,R-BOX/o-HOBn-Cu(OTf)2 complex was indicated when enantioselectivities were compared between the following two reactions. Thus, the enantioselectivity observed in the reaction of O-benzylhydroxylamine with l-crotonoyl-3-phenyl-2-imi-dazolidinone catalyzed by this catalyst was 85% ee, while that observed in a similar reaction catalyzed by J ,J -BOX/Bn.Cu(OTf)2 having no hydroxyl moiety was much lower (71% ee). In these reactions, the same mode of chirality was induced (Scheme 7.46). We believe the free hydroxyl groups can weakly coordinate to the copper(II) ion to hinder the free rotation of the benzyl-shielding substituent across the C(4)-CH2 bond. This conformational lock would either make the coordination of acceptor molecules to the metallic center of catalyst easy or increase the efficiency of chiral shielding of the coordinated acceptor molecules. 

In comparison to heterogeneous catalyzed reactions, homogeneous catalysis offers several important advantages. The catalyst complex is usually well defined and can be rationally optimized by ligand modification. Every metal center can be active in the reaction. The reaction conditions are usually much milder (T usually < 200 °C), and selectivities are often much higher than with heterogeneous catalysts. 

The reaction takes place at low temperature (40-60 °C), without any solvent, in two (or more, up to four) well-mixed reactors in series. The pressure is sufficient to maintain the reactants in the liquid phase (no gas phase). Mixing and heat removal are ensured by an external circulation loop. The two components of the catalytic system are injected separately into this reaction loop with precise flow control. The residence time could be between 5 and 10 hours. At the output of the reaction section, the effluent containing the catalyst is chemically neutralized and the catalyst residue is separated from the products by aqueous washing. The catalyst components are not recycled. Unconverted olefin and inert hydrocarbons are separated from the octenes by distillation columns. The catalytic system is sensitive to impurities that can coordinate strongly to the nickel metal center or can react with the alkylaluminium derivative (polyunsaturated hydrocarbons and polar compounds such as water). 

In an extension of this work, the Shibasaki group developed the novel transformation 48—>51 shown in Scheme 10.25c To rationalize this interesting structural change, it was proposed that oxidative addition of the vinyl triflate moiety in 48 to an asymmetric palladium ) catalyst generated under the indicated conditions affords the 16-electron Pd+ complex 49. Since the weakly bound triflate ligand can easily dissociate from the metal center, a silver salt is not needed. Insertion of the coordinated alkene into the vinyl C-Pd bond then affords a transitory 7t-allylpalladium complex 50 which is captured in a regio- and stereocontrolled fashion by acetate ion to give the optically active bicyclic diene 51 in 80% ee (89% yield). This catalytic asymmetric synthesis by a Heck cyclization/ anion capture process is the first of its kind. 

In essence the active centers for catalytic polymerization of olefins are organometallic complexes of transition metals. For this reason a search for individual organometallic compounds that would possess catalytic activity in olefin polymerization is of great interest. The first attempts to use organometallic compounds of transition metals as catalysts for olefin polymerization were made long ago [e.g. CH3TiCl3 as a catalyst for polymerization of ethylene 116). However, only in recent years as a result of the application of relatively stable organometallic compounds of transition... 

The formation of surface defects of a crystal lattice. It was observed while using crystal compounds of transition metals as catalysts [e.g. as was shown by Arlman (171, 173), for a TiCl3 surface defects appear on the lateral faces of the crystal]. In this case low surface concentration of the propagation centers should be expected, as is illustrated in the case of polymerization by titanium dichloride (158). The observed... 

The conjugate base of the latter is the actual nucleophile. Thus the increase of activity up to pH 7.3 accounts for the deprotonation of this water molecule while the decrease in activity above this pH is related to the reduced ability of a phosphate to compete with a hydroxide for coordination to the metal center. This is a common feature of many catalysts with similar mechanisms. 

Indeed, these reactions proceed at 25 °C in ethanol-aqueous media in the absence of transition metal catalysts. The ease with which P-H bonds in primary phosphines can be converted to P-C bonds, as shown in Schemes 9 and 10, demonstrates the importance of primary phosphines in the design and development of novel organophosphorus compounds. In particular, functionalized hydroxymethyl phosphines have become ubiquitous in the development of water-soluble transition metal/organometallic compounds for potential applications in biphasic aqueous-organic catalysis and also in transition metal based pharmaceutical development [53-62]. Extensive investigations on the coordination chemistry of hydroxymethyl phosphines have demonstrated unique stereospe-cific and kinetic propensity of this class of water-soluble phosphines [53-62]. Representative examples outlined in Fig. 4, depict bidentate and multidentate coordination modes and the unique kinetic propensity to stabilize various oxidation states of metal centers, such as Re( V), Rh(III), Pt(II) and Au(I), in aqueous media [53 - 62]. Therefore, the importance of functionalized primary phosphines in the development of multidentate water-soluble phosphines cannot be overemphasized. 

---