Mechanisms aqueous solution

Aqueous solutions of chitosan-g-PEG and hyamlonic acid-g-Poloxamer undergoing thermal gelation were reported. Aqueous solutions of hydroxy-propyl methylcellulose or methyl cellulose also show thermal gelation. The hydrophobic interactions were suggested as the sol-to-gel transition mechanism. Aqueous solutions of the inclusion complexes between methylated a-... 

The ability of living organisms to differentiate between the chemically similar sodium and potassium ions must depend upon some difference between these two ions in aqueous solution. Essentially, this difference is one of size of the hydrated ions, which in turn means a difference in the force of electrostatic (coulombic) attraction between the hydrated cation and a negatively-charged site in the cell membrane thus a site may be able to accept the smaller ion Na (aq) and reject the larger K (aq). This same mechanism of selectivity operates in other ion-selection processes, notably in ion-exchange resins. 

Preparation of silver maleate. Dissolve 65 g. of pure maleic acid (Section 111,143) in the calculated quantity of carefully standardised 3-5N aqueous ammonia solution in a 1-htre beaker and add, whilst stirring mechanically, a solution of 204 g. of silver nitrate in 200 ml. of water. Filter oflf the precipitated silver maleate at the pump, wash it with distilled water, and press well with the back of a large flat glass stopper. Dry in an electric oven at 50-60° to constant weight. The yield of the dry silver salt is 150 g. Store in a vacuum desiccator in the dark. 

In aqueous solution at 100° the change is reversible and equilibrium is reached when 95 per cent, of the ammonium cyanate has changed into urea. Urea is less soluble in water than is ammonium sulphate, hence if the solution is evaporated, urea commences to separate, the equilibrium is disturbed, more ammonium cyanate is converted into urea to maintain the equilibrium and evfflitually the change into urea becomes almost complete. The urea is isolated from the residue by extraction with boiling methyl or ethyl alcohol. The mechanism of the reaction which is generally accepted involves the dissociation of the ammonium cyanate into ammonia and cyanic acid, and the addition of ammonia to the latter ... 

The mechanism of the reaction involves the intermediate formation of an amine cyanate (see previous Section) in aqueous solution urea behaves as an equifi-brium mixture with ammonium cyanate ... 

Some recent general reviews deal with the mechanism of N-nitrosation in aqueous solution (345), the nitrosation of secondary amines (346). the effect of solvent acidity On diazotization (347) and the reactivity of diazonium salts (1691). Therefore, a complete rationalization of the reactivity of amino azaaromatics would be timelv. 

FIGURE 18 1 Mechanism of acid catalyzed enolization of an aldehyde or ketone in aqueous solution... 

Positive-Tone Photoresists based on Dissolution Inhibition by Diazonaphthoquinones. The intrinsic limitations of bis-azide—cycHzed mbber resist systems led the semiconductor industry to shift to a class of imaging materials based on diazonaphthoquinone (DNQ) photosensitizers. Both the chemistry and the imaging mechanism of these resists (Fig. 10) differ in fundamental ways from those described thus far (23). The DNQ acts as a dissolution inhibitor for the matrix resin, a low molecular weight condensation product of formaldehyde and cresol isomers known as novolac (24). The phenoHc stmcture renders the novolac polymer weakly acidic, and readily soluble in aqueous alkaline solutions. In admixture with an appropriate DNQ the polymer s dissolution rate is sharply decreased. Photolysis causes the DNQ to undergo a multistep reaction sequence, ultimately forming a base-soluble carboxyHc acid which does not inhibit film dissolution. Immersion of a pattemwise-exposed film of the resist in an aqueous solution of hydroxide ion leads to rapid dissolution of the exposed areas and only very slow dissolution of unexposed regions. In contrast with crosslinking resists, the film solubiHty is controUed by chemical and polarity differences rather than molecular size. 

Urea.—Forma.IdehydeResins. Cellular urea—formaldehyde resins can be prepared in the following manner an aqueous solution containing surfactant and catalyst is made into a low density, fine-celled foam by dispersing air into it mechanically. A second aqueous solution consisting of partially cured urea—formaldehyde resin is then mixed into the foam by mechanical agitation. The catalyst in the initial foam causes the dispersed resin to cure in the cellular state. The resultant hardened foam is dried at elevated temperatures. Densities as low as 8 kg/m can be obtained by this method (117). 

The pale blue tris(2,2 -bipyridine)iron(3+) ion [18661-69-3] [Fe(bipy)2], can be obtained by oxidation of [Fe(bipy)2]. It cannot be prepared directiy from iron(III) salts. Addition of 2,2 -bipyridine to aqueous iron(III) chloride solutions precipitates the doubly hydroxy-bridged species [(bipy)2Fe(. t-OH)2Fe(bipy)2]Cl4 [74930-87-3]. [Fe(bipy)2] has an absorption maximum at 610 nm, an absorptivity of 330 (Mem), and a formation constant of 10. In mildly acidic to alkaline aqueous solutions the ion is reduced to the iron(II) complex. [Fe(bipy)2] is frequentiy used in studies of electron-transfer mechanisms. The triperchlorate salt [15388-50-8] is isolated most commonly. 

Metal Catalysis. Aqueous solutions of amine oxides are unstable in the presence of mild steel and thermal decomposition to secondary amines and aldehydes under acidic conditions occurs (24,25). The reaction proceeds by a free-radical mechanism (26). The decomposition is also cataly2ed by V(III) and Cu(I). 

In two proposed alternative processes, the chlorine is replaced in the hypochlorination reaction by hypochlorous acid [7790-92-3] HOCl, or tert-huty hypochlorite. In the first, a concentrated (>10% by weight) aqueous solution of hypochlorous acid, substantially free of chloride, chlorate, and alkah metal ions, is contacted with propylene to produce propylene chlorohydrin (113). The likely mechanism of reaction is the same as that for chlorine, as chlorine is generated in situ through the equiUbrium of chlorine and hypochlorous acid (109). 

Chemical, or abiotic, transformations are an important fate of many pesticides. Such transformations are ubiquitous, occurring in either aqueous solution or sorbed to surfaces. Rates can vary dramatically depending on the reaction mechanism, chemical stmcture, and relative concentrations of such catalysts as protons, hydroxyl ions, transition metals, and clay particles. Chemical transformations can be genetically classified as hydrolytic, photolytic, or redox reactions (transfer of electrons). 

Alkaline Degradation. At high pH, sucrose is relatively stable however, prolonged exposure to strong alkaU and heat converts sucrose to a mixture of organic acids (mainly lactate), ketones, and cycHc condensation products. The mechanism of alkaline degradation is uncertain however, initial formation of glucose and fructose apparendy does not occur (31). In aqueous solutions, sucrose is most stable at —pH 9.0. 

Organophosphonates are similar to polyphosphates in chelation properties, but they are stable to hydrolysis and replace the phosphates where persistence in aqueous solution is necessary. They are used as scale and corrosion inhibitors (52) where they function via the threshold effect, a mechanism requiring far less than the stoichiometric amounts for chelation of the detrimental ions present. Threshold inhibition in cooling water treatment is the largest market for organophosphonates, but there is a wide variety of other uses (50). 

Kinetic data on acetate displacement from C-3 using a number of sulfur and nitrogen nucleophiles in aqueous solution at near neutral pH demonstrate that the reaction proceeds by an 5 1 mechanism (B-72MI51004). The intermediate in this reaction is depicted as a dipolar allylic carbonium ion (9) with significant charge delocalization. Of particular significance in this regard is the observation that the free carboxylate at C-4 is required since... 

---